| /hal_stm32-latest/stm32cube/stm32l4xx/drivers/include/ |
| D | stm32l4xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
117 … compatibility with some ADC on other STM32 series
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
129 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
147 … compatibility with some ADC on other STM32 series
151 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
159 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
364 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
375 with which VrefInt has been calibrated in production
397 … with which temperature sensor has been calibrated in production
[all …]
|
| /hal_stm32-latest/stm32cube/stm32l5xx/drivers/include/ |
| D | stm32l5xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
117 … compatibility with some ADC on other STM32 series
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
129 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
147 … compatibility with some ADC on other STM32 series
151 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
159 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
364 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
375 with which VrefInt has been calibrated in production
391 … with which temperature sensor has been calibrated in production (tolerance +-10 mV) (unit: mV). */
[all …]
|
| /hal_stm32-latest/stm32cube/stm32u5xx/drivers/include/ |
| D | stm32u5xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
172 … for compatibility with some ADC on other STM32
176 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
189 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
207 … compatibility with some ADC on other STM32 families
211 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
219 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
268 … ADC_CHANNEL_ID_NUMBER_MASK with
272 … contain channels with a restricted
357 #define ADC_CHANNEL_0_SMP (ADC_SMPR1_REGOFFSET ) /* Channel is with "ADC_SMPR1_SMP0" register */
[all …]
|
| /hal_stm32-latest/stm32cube/stm32wbaxx/drivers/include/ |
| D | stm32wbaxx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
71 … compatibility with some ADC on other STM32 series
75 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
83 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
104 ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer,
105 if set to mode "fully configurable", can contain channels with a restricted channel number.
247 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
258 with which VrefInt has been calibrated in production
274 … with which temperature sensor has been calibrated in production
288 * @brief Driver macro reserved for internal use: isolate bits with the
[all …]
|
| /hal_stm32-latest/stm32cube/stm32wbxx/drivers/include/ |
| D | stm32wbxx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
129 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
132 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
140 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
157 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
160 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
168 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
200 …MBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "f…
430 …TP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
432 …RT | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
[all …]
|
| /hal_stm32-latest/stm32cube/stm32c0xx/drivers/include/ |
| D | stm32c0xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
71 … compatibility with some ADC on other STM32 series
75 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
83 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
104 ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer,
105 if set to mode "fully configurable", can contain channels with a restricted channel number.
264 … | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property
275 … voltage with which VrefInt has been calibrated in production
283 …(with taking into account conversion from digital value resolution 12 bit, analog voltage referenc…
293 … with which temperature sensor has been calibrated in production
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f3xx/drivers/include/ |
| D | stm32f3xx_ll_comp.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
39 /* COMP IP with 2 instances */
167 /* Note: Comparator input plus specific to COMP instances, defined with */
170 … dedicated switch. Caution: Parameter specific to COMP instances, defined with generic naming, not…
175 /* Note: Comparator input plus specific to COMP instances, defined with */
178 … dedicated switch. Caution: Parameter specific to COMP instances, defined with generic naming, not…
257 /* Note: Output redirection specific to COMP instances, defined with */
264 …put capture 1. Caution: Parameter specific to COMP instances, defined with generic naming, not…
265 …REF clear. Caution: Parameter specific to COMP instances, defined with generic naming, not…
266 …put capture 2. Caution: Parameter specific to COMP instances, defined with generic naming, not…
[all …]
|
| D | stm32f3xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
123 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
126 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
134 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
164 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
167 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
175 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
362 …RT | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
368 …32_t) 3300U) /* Analog voltage reference (Vref+) value with which temperature s…
374 …_t) 3300U) /* Analog voltage reference (Vref+) voltage with which temperature s…
[all …]
|
| /hal_stm32-latest/stm32cube/stm32mp1xx/drivers/include/ |
| D | stm32mp1xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
131 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
134 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
142 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
159 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
162 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
170 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
358 …RT | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
364 … ( 3300UL) /* Analog voltage reference (Vref+) value with which temperature s…
370 … (3300UL) /* Analog voltage reference (Vref+) voltage with which temperature s…
[all …]
|
| /hal_stm32-latest/stm32cube/stm32n6xx/drivers/include/ |
| D | stm32n6xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
114 … for compatibility with some ADC on other STM32
118 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
126 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
143 … compatibility with some ADC on other STM32 series
147 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
155 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
377 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
396 … In case of usage with HAL driver, refer to HAL_BSEC_OTP_Reload() */
398 with which VrefInt has been calibrated in production
[all …]
|
| /hal_stm32-latest/stm32cube/stm32h5xx/drivers/include/ |
| D | stm32h5xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
113 … compatibility with some ADC on other STM32 series
117 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
125 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
141 … compatibility with some ADC on other STM32 series
145 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
153 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
355 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
366 with which VrefInt has been calibrated in production
382 … with which temperature sensor has been calibrated in production
[all …]
|
| /hal_stm32-latest/stm32cube/stm32wlxx/drivers/include/ |
| D | stm32wlxx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
72 … compatibility with some ADC on other STM32 families
76 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
84 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
106 ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer,
107 if set to mode "fully configurable", can contain channels with a restricted channel number.
253 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
263 with which VrefInt has been calibrated in production (tolerance: +-10 mV) (unit: mV). */
276 …with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */
340 * (setting possible with ADC enabled without conversion on going,
[all …]
|
| /hal_stm32-latest/stm32cube/stm32g0xx/drivers/include/ |
| D | stm32g0xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
72 … compatibility with some ADC on other STM32 series
76 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
84 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
106 ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer,
107 if set to mode "fully configurable", can contain channels with a restricted channel number.
254 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
265 with which VrefInt has been calibrated in production
281 … with which temperature sensor has been calibrated in production
346 * (setting possible with ADC enabled without conversion on going,
[all …]
|
| /hal_stm32-latest/stm32cube/stm32h7rsxx/drivers/include/ |
| D | stm32h7rsxx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
117 … compatibility with some ADC on other STM32 series
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
129 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
147 … compatibility with some ADC on other STM32 series
151 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
159 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
363 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
374 with which VrefInt has been calibrated in production
390 … with which temperature sensor has been calibrated in production
[all …]
|
| /hal_stm32-latest/stm32cube/stm32u0xx/drivers/include/ |
| D | stm32u0xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
71 … compatibility with some ADC on other STM32 series
75 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
83 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
104 ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer,
105 if set to mode "fully configurable", can contain channels with a restricted channel number.
254 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
265 with which VrefInt has been calibrated in production
281 … with which temperature sensor has been calibrated in production
346 * (setting possible with ADC enabled without conversion on going,
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f7xx/drivers/include/ |
| D | stm32f7xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
110 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
113 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
138 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
141 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
149 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
258 … ( 3300U) /* Analog voltage reference (Vref+) value with which temperature s…
264 … ( 3300U) /* Analog voltage reference (Vref+) voltage with which temperature s…
276 * @brief Driver macro reserved for internal use: isolate bits with the
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f4xx/drivers/include/ |
| D | stm32f4xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
110 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
113 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
138 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
141 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
149 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
259 … ( 3300UL) /* Analog voltage reference (Vref+) value with which temperature s…
265 … ( 3300UL) /* Analog voltage reference (Vref+) voltage with which temperature s…
278 * @brief Driver macro reserved for internal use: isolate bits with the
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f0xx/drivers/include/ |
| D | stm32f0xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
52 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
55 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
63 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
183 …TP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
189 … ( 3300U) /* Analog voltage reference (Vref+) value with which temperature s…
195 … ( 3300U) /* Analog voltage reference (Vref+) voltage with which temperature s…
220 * (setting possible with ADC enabled without conversion on going,
221 * ADC enabled with conversion on going, ...)
222 * Each feature can be updated afterwards with a unitary function
[all …]
|
| /hal_stm32-latest/stm32cube/stm32h7xx/drivers/include/ |
| D | stm32h7xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
129 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
132 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
140 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
157 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
160 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
168 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
366 …RT | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
377 … (3300UL) /* Analog voltage reference (Vref+) value with which temperature s…
397 … (3300UL) /* Analog voltage reference (Vref+) voltage with which temperature s…
[all …]
|
| /hal_stm32-latest/stm32cube/stm32l0xx/drivers/include/ |
| D | stm32l0xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
52 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
55 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
63 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
187 …TP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": S…
193 … (3000U) /* Analog voltage reference (Vref+) value with which temperature s…
204 … (3000U) /* Analog voltage reference (Vref+) voltage with which temperature s…
261 * (setting possible with ADC enabled without conversion on going,
262 * ADC enabled with conversion on going, ...)
263 * Each feature can be updated afterwards with a unitary function
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f2xx/drivers/include/ |
| D | stm32f2xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
110 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
113 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
138 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
141 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
149 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
266 * @brief Driver macro reserved for internal use: isolate bits with the
315 …de configuration to operate in independent mode or multimode (for devices with several ADC instanc…
345 * (setting possible with ADC enabled without conversion on going,
[all …]
|
| /hal_stm32-latest/stm32cube/stm32l1xx/drivers/include/ |
| D | stm32l1xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
136 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
139 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
147 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
164 …_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other S…
167 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
175 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
327 … /* Analog voltage reference (Vref+) value with which temperature s…
335 … /* Analog voltage reference (Vref+) voltage with which temperature s…
349 * @brief Driver macro reserved for internal use: isolate bits with the
[all …]
|
| /hal_stm32-latest/stm32cube/stm32u5xx/drivers/src/ |
| D | stm32u5xx_hal_pwr.c | 20 * If no LICENSE file comes with this software, it is provided AS-IS.
80 with the right parameter to configure the wake up pin polarity (Low or
199 * The prototype is kept just to maintain compatibility with other
300 (++) PWR_SLEEPENTRY_WFI : Enter SLEEP mode with WFI instruction.
301 (++) PWR_SLEEPENTRY_WFE : Enter SLEEP mode with WFE instruction and
303 (++) PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR: Enter SLEEP mode with WFE instruction and
307 kept as parameter just to maintain compatibility with other families.
317 The Stop 0 mode is based on the Cortex-M33 Deepsleep mode combined with
321 Some peripherals with the LPBAM capability can switch on HSI16 or MSIS or
329 with :
[all …]
|
| /hal_stm32-latest/stm32cube/stm32f1xx/drivers/include/ |
| D | stm32f1xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
209 * @brief Driver macro reserved for internal use: isolate bits with the
253 …de configuration to operate in independent mode or multimode (for devices with several ADC instanc…
271 * (setting possible with ADC enabled without conversion on going,
272 * ADC enabled with conversion on going, ...)
273 * Each feature can be updated afterwards with a unitary function
274 * and potentially with ADC in a different state than disabled,
297 * (functions with prefix "REG").
304 * (setting possible with ADC enabled without conversion on going,
305 * ADC enabled with conversion on going, ...)
[all …]
|
| /hal_stm32-latest/stm32cube/stm32g4xx/drivers/include/ |
| D | stm32g4xx_ll_adc.h | 14 * If no LICENSE file comes with this software, it is provided AS-IS.
117 … compatibility with some ADC on other STM32 series
121 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
129 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
147 … compatibility with some ADC on other STM32 series
151 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
159 /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
363 … | ADC_CR_ADSTART | ADC_CR_ADSTP) /* ADC register CR bits with
374 with which VrefInt has been calibrated in production
390 … with which temperature sensor has been calibrated in production
[all …]
|
