/Linux-v6.1/Documentation/devicetree/bindings/pci/ |
D | faraday,ftpci100.yaml | 18 The host controller appear on the PCI bus with vendor ID 0x159b (Faraday 19 Technology) and product ID 0x4321. 34 interrupt-map-mask = <0xf800 0 0 7>; 36 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ 37 <0x4800 0 0 2 &pci_intc 1>, 38 <0x4800 0 0 3 &pci_intc 2>, 39 <0x4800 0 0 4 &pci_intc 3>, 40 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ 41 <0x5000 0 0 2 &pci_intc 2>, 42 <0x5000 0 0 3 &pci_intc 3>, [all …]
|
D | v3-v360epc-pci.txt | 18 each be exactly 256MB (0x10000000) in size. 38 reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; 42 bus-range = <0x00 0xff>; 43 ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ 44 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ 45 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ 46 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ 47 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ 48 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ 49 dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ [all …]
|
/Linux-v6.1/arch/arm/boot/dts/ |
D | integratorap.dts | 17 #size-cells = <0>; 19 cpu@0 { 28 reg = <0>; 37 operating-points = <71000 0 38 66000 0 39 60000 0 40 48000 0 41 36000 0 42 24000 0 43 12000 0>; [all …]
|
D | gemini.dtsi | 23 pinctrl-0 = <&pflash_default_pins>; 33 reg = <0x40000000 0x1000>; 41 offset = <0x0c>; 43 mask = <0xC0000000>; 51 pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, 161 reg = <0x41000000 0x1000>; 170 reg = <0x42000000 0x100>; 175 pinctrl-0 = <&uart_default_pins>; 181 reg = <0x43000000 0x1000>; 195 reg = <0x45000000 0x100>; [all …]
|
D | alpine.dtsi | 37 reg = <0 0 0 0>; 43 #size-cells = <0>; 46 cpu@0 { 49 reg = <0>; 97 #size-cells = <0>; 98 #address-cells = <0>; 100 reg = <0x0 0xfb001000 0x0 0x1000>, 101 <0x0 0xfb002000 0x0 0x2000>, 102 <0x0 0xfb004000 0x0 0x2000>, 103 <0x0 0xfb006000 0x0 0x2000>; [all …]
|
/Linux-v6.1/drivers/cpufreq/ |
D | ti-cpufreq.c | 20 #define REVISION_MASK 0xF 23 #define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F 24 #define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA 32 #define DRA7_EFUSE_NOM_MPU_OPP BIT(0) 37 #define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C 38 #define OMAP3_CONTROL_IDCODE 0x4830A204 39 #define OMAP34xx_ProdID_SKUID 0x4830A20C 40 #define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270) 110 .efuse_offset = 0x07fc, 111 .efuse_mask = 0x1fff, [all …]
|
/Linux-v6.1/drivers/regulator/ |
D | qcom_spmi-regulator.c | 25 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE 0x00 26 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN0 0x01 27 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN1 0x02 28 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN2 0x04 29 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN3 0x08 30 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT 0x10 33 #define SPMI_REGULATOR_PIN_CTRL_HPM_NONE 0x00 34 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN0 0x01 35 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN1 0x02 36 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN2 0x04 [all …]
|
/Linux-v6.1/drivers/video/fbdev/ |
D | hpfb.c | 34 #define TC_NBLANK 0x4080 35 #define TC_WEN 0x4088 36 #define TC_REN 0x408c 37 #define TC_FBEN 0x4090 38 #define TC_PRR 0x40ea 41 #define RR_CLEAR 0x0 42 #define RR_COPY 0x3 43 #define RR_NOOP 0x5 44 #define RR_XOR 0x6 45 #define RR_INVERT 0xa [all …]
|
/Linux-v6.1/drivers/media/i2c/ |
D | ov5647.c | 42 #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) 44 #define OV5647_SW_STANDBY 0x0100 45 #define OV5647_SW_RESET 0x0103 46 #define OV5647_REG_CHIPID_H 0x300a 47 #define OV5647_REG_CHIPID_L 0x300b 48 #define OV5640_REG_PAD_OUT 0x300d 49 #define OV5647_REG_EXP_HI 0x3500 50 #define OV5647_REG_EXP_MID 0x3501 51 #define OV5647_REG_EXP_LO 0x3502 52 #define OV5647_REG_AEC_AGC 0x3503 [all …]
|
D | ov5670.c | 13 #define OV5670_REG_CHIP_ID 0x300a 14 #define OV5670_CHIP_ID 0x005670 16 #define OV5670_REG_MODE_SELECT 0x0100 17 #define OV5670_MODE_STANDBY 0x00 18 #define OV5670_MODE_STREAMING 0x01 20 #define OV5670_REG_SOFTWARE_RST 0x0103 21 #define OV5670_SOFTWARE_RST 0x01 24 #define OV5670_REG_VTS 0x380e 25 #define OV5670_VTS_30FPS 0x0808 /* default for 30 fps */ 26 #define OV5670_VTS_MAX 0xffff [all …]
|
D | ov8856.c | 26 #define OV8856_REG_CHIP_ID 0x300a 27 #define OV8856_CHIP_ID 0x00885a 29 #define OV8856_REG_MODE_SELECT 0x0100 30 #define OV8856_MODE_STANDBY 0x00 31 #define OV8856_MODE_STREAMING 0x01 34 #define OV8856_2A_MODULE 0x01 35 #define OV8856_1B_MODULE 0x02 37 /* the OTP read-out buffer is at 0x7000 and 0xf is the offset 40 #define OV8856_MODULE_REVISION 0x700f 41 #define OV8856_OTP_MODE_CTRL 0x3d84 [all …]
|
/Linux-v6.1/drivers/gpu/drm/msm/adreno/ |
D | a2xx_gpu.c | 18 for (i = 0; i < submit->nr_cmds; i++) { in a2xx_submit() 42 OUT_RING(ring, 0x00000000); in a2xx_submit() 49 OUT_RING(ring, 0x80000000); in a2xx_submit() 56 struct msm_ringbuffer *ring = gpu->rb[0]; in a2xx_me_init() 60 /* All fields present (bits 9:0) */ in a2xx_me_init() 61 OUT_RING(ring, 0x000003ff); in a2xx_me_init() 63 OUT_RING(ring, 0x00000000); in a2xx_me_init() 65 OUT_RING(ring, 0x00000000); in a2xx_me_init() 67 OUT_RING(ring, REG_A2XX_RB_SURFACE_INFO - 0x2000); in a2xx_me_init() 68 OUT_RING(ring, REG_A2XX_PA_SC_WINDOW_OFFSET - 0x2000); in a2xx_me_init() [all …]
|
/Linux-v6.1/arch/arm64/boot/dts/amazon/ |
D | alpine-v2.dtsi | 47 #size-cells = <0>; 49 cpu@0 { 52 reg = <0x0 0x0>; 59 reg = <0x0 0x1>; 66 reg = <0x0 0x2>; 73 reg = <0x0 0x3>; 81 cpu_suspend = <0x84000001>; 82 cpu_off = <0x84000002>; 83 cpu_on = <0x84000003>; 88 #clock-cells = <0>; [all …]
|
/Linux-v6.1/drivers/net/ethernet/smsc/ |
D | epic100.c | 35 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ 68 #define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */ 102 module_param(debug, int, 0); 103 module_param(rx_copybreak, int, 0); 104 module_param_array(options, int, NULL, 0); 105 module_param_array(full_duplex, int, NULL, 0); 106 MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)"); 107 MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex"); 146 #define EPIC_TOTAL_SIZE 0x100 150 #define EPIC_BAR 0 [all …]
|
/Linux-v6.1/drivers/gpu/drm/sun4i/ |
D | sun4i_backend.h | 20 #define SUN4I_BACKEND_MODCTL_REG 0x800 24 #define SUN4I_BACKEND_MODCTL_OUT_LCD0 (0 << 20) 34 #define SUN4I_BACKEND_MODCTL_DEBE_EN BIT(0) 36 #define SUN4I_BACKEND_BACKCOLOR_REG 0x804 39 #define SUN4I_BACKEND_DISSIZE_REG 0x808 40 #define SUN4I_BACKEND_DISSIZE(w, h) (((((h) - 1) & 0xffff) << 16) | \ 41 (((w) - 1) & 0xffff)) 43 #define SUN4I_BACKEND_LAYSIZE_REG(l) (0x810 + (0x4 * (l))) 44 #define SUN4I_BACKEND_LAYSIZE(w, h) (((((h) - 1) & 0x1fff) << 16) | \ 45 (((w) - 1) & 0x1fff)) [all …]
|
/Linux-v6.1/arch/mips/boot/dts/loongson/ |
D | loongson64-2k1000.dtsi | 15 #size-cells = <0>; 17 cpu0: cpu@0 { 20 reg = <0x0>; 29 reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */ 30 <0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */ 31 <0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */ 35 #clock-cells = <0>; 41 #address-cells = <0>; 51 ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* ioports */ 52 0 0x40000000 0 0x40000000 0 0x40000000 [all …]
|
D | ls7a-pch.dtsi | 8 ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */ 9 0 0x20000000 0 0x20000000 0 0x10000000 10 0 0x40000000 0 0x40000000 0 0x40000000 /* PCI MEM */ 11 0xe00 0x00000000 0xe00 0x00000000 0x100 0x0000000>; 15 reg = <0 0x10000000 0 0x400>; 18 loongson,pic-base-vec = <0>; 24 reg = <0 0x10080000 0 0x100>; 34 reg = <0 0x10080100 0 0x100>; 44 reg = <0 0x10080200 0 0x100>; 54 reg = <0 0x10080300 0 0x100>; [all …]
|
/Linux-v6.1/drivers/staging/media/meson/vdec/ |
D | codec_hevc_common.c | 13 #define MMU_COMPRESS_HEADER_SIZE 0x48000 14 #define MMU_MAP_SIZE 0x4800 17 0x0401, 0x8401, 0x0800, 0x0402, 18 0x9002, 0x1423, 0x8CC3, 0x1423, 19 0x8804, 0x9825, 0x0800, 0x04FE, 20 0x8406, 0x8411, 0x1800, 0x8408, 21 0x8409, 0x8C2A, 0x9C2B, 0x1C00, 22 0x840F, 0x8407, 0x8000, 0x8408, 23 0x2000, 0xA800, 0x8410, 0x04DE, 24 0x840C, 0x840D, 0xAC00, 0xA000, [all …]
|
/Linux-v6.1/drivers/staging/media/atomisp/i2c/ |
D | ov2722.h | 38 #define I2C_MSG_LENGTH 0x2 50 * bits 31-16: numerator, bits 15-0: denominator 52 #define OV2722_FOCAL_LENGTH_DEFAULT 0x1160064 56 * bits 31-16: numerator, bits 15-0: denominator 58 #define OV2722_F_NUMBER_DEFAULT 0x1a000a 65 * bits 7-0: min f-number denominator 67 #define OV2722_F_NUMBER_RANGE 0x1a0a1a0a 68 #define OV2720_ID 0x2720 69 #define OV2722_ID 0x2722 71 #define OV2722_FINE_INTG_TIME_MIN 0 [all …]
|
/Linux-v6.1/drivers/media/pci/cobalt/ |
D | cobalt-driver.h | 39 #define PCI_DEVICE_ID_COBALT 0x2732 65 #define COBALT_SYSSTAT_DIP0_MSK BIT(0) 98 #define COBALT_I2C_0_BASE 0x0 99 #define COBALT_I2C_1_BASE 0x080 100 #define COBALT_I2C_2_BASE 0x100 101 #define COBALT_I2C_3_BASE 0x180 102 #define COBALT_I2C_HSMA_BASE 0x200 104 #define COBALT_SYS_CTRL_BASE 0x400 114 #define COBALT_SYS_STAT_BASE 0x500 115 #define COBALT_SYS_STAT_MASK (COBALT_SYS_STAT_BASE + 0x08) [all …]
|
/Linux-v6.1/drivers/gpu/drm/radeon/reg_srcs/ |
D | r300 | 1 r300 0x4f60 2 0x1434 SRC_Y_X 3 0x1438 DST_Y_X 4 0x143C DST_HEIGHT_WIDTH 5 0x146C DP_GUI_MASTER_CNTL 6 0x1474 BRUSH_Y_X 7 0x1478 DP_BRUSH_BKGD_CLR 8 0x147C DP_BRUSH_FRGD_CLR 9 0x1480 BRUSH_DATA0 10 0x1484 BRUSH_DATA1 [all …]
|
D | r420 | 1 r420 0x4f60 2 0x1434 SRC_Y_X 3 0x1438 DST_Y_X 4 0x143C DST_HEIGHT_WIDTH 5 0x146C DP_GUI_MASTER_CNTL 6 0x1474 BRUSH_Y_X 7 0x1478 DP_BRUSH_BKGD_CLR 8 0x147C DP_BRUSH_FRGD_CLR 9 0x1480 BRUSH_DATA0 10 0x1484 BRUSH_DATA1 [all …]
|
D | rs600 | 1 rs600 0x6d40 2 0x1434 SRC_Y_X 3 0x1438 DST_Y_X 4 0x143C DST_HEIGHT_WIDTH 5 0x146C DP_GUI_MASTER_CNTL 6 0x1474 BRUSH_Y_X 7 0x1478 DP_BRUSH_BKGD_CLR 8 0x147C DP_BRUSH_FRGD_CLR 9 0x1480 BRUSH_DATA0 10 0x1484 BRUSH_DATA1 [all …]
|
/Linux-v6.1/drivers/net/ipa/data/ |
D | ipa_data-v4.5.c | 14 /* Source resource types; first must have value 0 */ 15 IPA_RESOURCE_TYPE_SRC_PKT_CONTEXTS = 0, 21 /* Destination resource types; first must have value 0 */ 22 IPA_RESOURCE_TYPE_DST_DATA_SECTORS = 0, 29 IPA_RSRC_GROUP_SRC_UNUSED_0 = 0, 37 IPA_RSRC_GROUP_DST_UNUSED_0 = 0, 49 .max_reads = 0, /* no limit (hardware max) */ 156 .channel_id = 0, 208 .min = 0, .max = 63, 211 .min = 0, .max = 63, [all …]
|
D | ipa_data-v4.9.c | 14 /* Source resource types; first must have value 0 */ 15 IPA_RESOURCE_TYPE_SRC_PKT_CONTEXTS = 0, 21 /* Destination resource types; first must have value 0 */ 22 IPA_RESOURCE_TYPE_DST_DATA_SECTORS = 0, 29 IPA_RSRC_GROUP_SRC_UL_DL = 0, 35 IPA_RSRC_GROUP_DST_UL_DL_DPL = 0, 46 .max_reads = 0, /* no limit (hardware max) */ 148 .channel_id = 0, 209 .min = 0, .max = 4, 212 .min = 0, .max = 4, [all …]
|