/Linux-v6.6/Documentation/admin-guide/media/ |
D | rkisp1.rst | 77 YUV4:2:2 -> YUV4:2:0). They also have cropping capability on the sink pad. 86 This is the isp entity. It is connected to the sensor on sink pad 0 and 88 the CSI-2 protocol. It has a cropping capability on sink pad 0 that is 90 Cropping on sink pad 0 defines the image region from the sensor. 126 In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is 137 "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]" 138 "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]" 139 "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]" 141 # set format for imx219 4-0010:0 142 "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]' [all …]
|
/Linux-v6.6/arch/arm64/boot/dts/amd/ |
D | amd-seattle-soc.dtsi | 20 reg = <0x0 0xe1110000 0 0x1000>, 21 <0x0 0xe112f000 0 0x2000>, 22 <0x0 0xe1140000 0 0x2000>, 23 <0x0 0xe1160000 0 0x2000>; 24 interrupts = <1 9 0xf04>; 25 ranges = <0 0 0 0xe1100000 0 0x100000>; 29 reg = <0x0 0x00080000 0 0x1000>; 35 interrupts = <1 13 0xff04>, 36 <1 14 0xff04>, 37 <1 11 0xff04>, [all …]
|
/Linux-v6.6/arch/m68k/mac/ |
D | psc.c | 45 for (i = 0x30 ; i < 0x70 ; i += 0x10) { in psc_debug_dump() 46 printk(KERN_DEBUG "PSC #%d: IFR = 0x%02X IER = 0x%02X\n", in psc_debug_dump() 63 for (i = 0 ; i < 9 ; i++) { in psc_dma_die_die_die() 64 psc_write_word(PSC_CTL_BASE + (i << 4), 0x8800); in psc_dma_die_die_die() 65 psc_write_word(PSC_CTL_BASE + (i << 4), 0x1000); in psc_dma_die_die_die() 66 psc_write_word(PSC_CMD_BASE + (i << 5), 0x1100); in psc_dma_die_die_die() 67 psc_write_word(PSC_CMD_BASE + (i << 5) + 0x10, 0x1100); in psc_dma_die_die_die() 105 for (i = 0x30 ; i < 0x70 ; i += 0x10) { in psc_init() 106 psc_write_byte(pIERbase + i, 0x0F); in psc_init() 107 psc_write_byte(pIFRbase + i, 0x0F); in psc_init() [all …]
|
/Linux-v6.6/drivers/net/ethernet/apple/ |
D | macmace.c | 39 #define N_TX_BUFF_ORDER 0 46 #define MACE_BUFF_SIZE 0x800 49 #define BROKEN_ADDRCHG_REV 0x0941 53 #define MACE_BASE (void *)(0x50F1C000) 54 #define MACE_PROM (void *)(0x50F08001) 105 psc_write_word(PSC_ENETRD_CMD + set, 0x0100); in mace_load_rxdma_base() 108 psc_write_word(PSC_ENETRD_CMD + set, 0x9800); in mace_load_rxdma_base() 109 mp->rx_tail = 0; in mace_load_rxdma_base() 124 psc_write_word(PSC_ENETRD_CTL, 0x8800); in mace_rxdma_reset() 125 mace_load_rxdma_base(dev, 0x00); in mace_rxdma_reset() [all …]
|
/Linux-v6.6/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
D | nv40.c | 27 enum nv40_sensor_style { INVALID_STYLE = -1, OLD_STYLE = 0, NEW_STYLE = 1 }; 33 case 0x43: in nv40_sensor_style() 34 case 0x44: in nv40_sensor_style() 35 case 0x4a: in nv40_sensor_style() 36 case 0x47: in nv40_sensor_style() 38 case 0x46: in nv40_sensor_style() 39 case 0x49: in nv40_sensor_style() 40 case 0x4b: in nv40_sensor_style() 41 case 0x4e: in nv40_sensor_style() 42 case 0x4c: in nv40_sensor_style() [all …]
|
D | g84.c | 34 if (nvkm_fuse_read(device->fuse, 0x1a8) == 1) in g84_temp_get() 35 return nvkm_rd32(device, 0x20400); in g84_temp_get() 46 if (nvkm_fuse_read(device->fuse, 0x1a8) == 1) { in g84_sensor_setup() 47 nvkm_mask(device, 0x20008, 0x80008000, 0x80000000); in g84_sensor_setup() 48 nvkm_mask(device, 0x2000c, 0x80000003, 0x00000000); in g84_sensor_setup() 63 /* enable RISING and FALLING IRQs for shutdown, THRS 0, 1, 2 and 4 */ in g84_therm_program_alarms() 64 nvkm_wr32(device, 0x20000, 0x000003ff); in g84_therm_program_alarms() 67 nvkm_wr32(device, 0x20484, sensor->thrs_shutdown.hysteresis); in g84_therm_program_alarms() 68 nvkm_wr32(device, 0x20480, sensor->thrs_shutdown.temp); in g84_therm_program_alarms() 71 nvkm_wr32(device, 0x204c4, sensor->thrs_fan_boost.temp); in g84_therm_program_alarms() [all …]
|
/Linux-v6.6/Documentation/devicetree/bindings/phy/ |
D | cdns,dphy-rx.yaml | 21 const: 0 39 reg = <0x4580000 0x1100>; 40 #phy-cells = <0>;
|
D | mediatek,tphy.yaml | 15 controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. 22 shared 0x0000 SPLLC 23 0x0100 FMREG 24 u2 port0 0x0800 U2PHY_COM 25 u3 port0 0x0900 U3PHYD 26 0x0a00 U3PHYD_BANK2 27 0x0b00 U3PHYA 28 0x0c00 U3PHYA_DA 29 u2 port1 0x1000 U2PHY_COM 30 u3 port1 0x1100 U3PHYD [all …]
|
/Linux-v6.6/arch/arm64/boot/dts/sprd/ |
D | sharkl3.dtsi | 22 reg = <0 0x20e00000 0 0x4000>; 25 ranges = <0 0 0x20e00000 0x4000>; 29 reg = <0x0 0x1020>; 37 reg = <0 0x402b0000 0 0x4000>; 40 ranges = <0 0 0x402b0000 0x4000>; 44 reg = <0 0x1200>; 54 reg = <0 0x402e0000 0 0x4000>; 57 ranges = <0 0 0x402e0000 0x4000>; 61 reg = <0 0x1100>; 69 reg = <0 0x40353000 0 0x3000>; [all …]
|
/Linux-v6.6/Documentation/devicetree/bindings/regulator/ |
D | qcom,usb-vbus-regulator.yaml | 41 #size-cells = <0>; 44 reg = <0x1100>;
|
/Linux-v6.6/arch/arm/mach-omap2/ |
D | cm2_7xx.h | 23 #define DRA7XX_CM_CORE_BASE 0x4a008000 29 #define DRA7XX_CM_CORE_OCP_SOCKET_INST 0x0000 30 #define DRA7XX_CM_CORE_CKGEN_INST 0x0104 31 #define DRA7XX_CM_CORE_COREAON_INST 0x0600 32 #define DRA7XX_CM_CORE_CORE_INST 0x0700 33 #define DRA7XX_CM_CORE_IVA_INST 0x0f00 34 #define DRA7XX_CM_CORE_CAM_INST 0x1000 35 #define DRA7XX_CM_CORE_DSS_INST 0x1100 36 #define DRA7XX_CM_CORE_GPU_INST 0x1200 37 #define DRA7XX_CM_CORE_L3INIT_INST 0x1300 [all …]
|
D | cm2_44xx.h | 26 #define OMAP4430_CM2_BASE 0x4a008000 32 #define OMAP4430_CM2_OCP_SOCKET_INST 0x0000 33 #define OMAP4430_CM2_CKGEN_INST 0x0100 34 #define OMAP4430_CM2_ALWAYS_ON_INST 0x0600 35 #define OMAP4430_CM2_CORE_INST 0x0700 36 #define OMAP4430_CM2_IVAHD_INST 0x0f00 37 #define OMAP4430_CM2_CAM_INST 0x1000 38 #define OMAP4430_CM2_DSS_INST 0x1100 39 #define OMAP4430_CM2_GFX_INST 0x1200 40 #define OMAP4430_CM2_L3INIT_INST 0x1300 [all …]
|
D | prm7xx.h | 26 #define DRA7XX_PRM_BASE 0x4ae06000 33 #define DRA7XX_PRM_OCP_SOCKET_INST 0x0000 34 #define DRA7XX_PRM_CKGEN_INST 0x0100 35 #define DRA7XX_PRM_MPU_INST 0x0300 36 #define DRA7XX_PRM_DSP1_INST 0x0400 37 #define DRA7XX_PRM_IPU_INST 0x0500 38 #define DRA7XX_PRM_COREAON_INST 0x0628 39 #define DRA7XX_PRM_CORE_INST 0x0700 40 #define DRA7XX_PRM_IVA_INST 0x0f00 41 #define DRA7XX_PRM_CAM_INST 0x1000 [all …]
|
D | prm33xx.h | 14 #define AM33XX_PRM_BASE 0x44E00000 21 #define AM33XX_PRM_OCP_SOCKET_MOD 0x0B00 22 #define AM33XX_PRM_PER_MOD 0x0C00 23 #define AM33XX_PRM_WKUP_MOD 0x0D00 24 #define AM33XX_PRM_MPU_MOD 0x0E00 25 #define AM33XX_PRM_DEVICE_MOD 0x0F00 26 #define AM33XX_PRM_RTC_MOD 0x1000 27 #define AM33XX_PRM_GFX_MOD 0x1100 28 #define AM33XX_PRM_CEFUSE_MOD 0x1200 31 #define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 [all …]
|
D | prm44xx.h | 28 #define OMAP4430_PRM_BASE 0x4a306000 35 #define OMAP4430_PRM_OCP_SOCKET_INST 0x0000 36 #define OMAP4430_PRM_CKGEN_INST 0x0100 37 #define OMAP4430_PRM_MPU_INST 0x0300 38 #define OMAP4430_PRM_TESLA_INST 0x0400 39 #define OMAP4430_PRM_ABE_INST 0x0500 40 #define OMAP4430_PRM_ALWAYS_ON_INST 0x0600 41 #define OMAP4430_PRM_CORE_INST 0x0700 42 #define OMAP4430_PRM_IVAHD_INST 0x0f00 43 #define OMAP4430_PRM_CAM_INST 0x1000 [all …]
|
/Linux-v6.6/arch/sparc/include/asm/ |
D | contregs.h | 12 #define AC_M_PCR 0x0000 /* shv Processor Control Reg */ 13 #define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ 14 #define AC_M_CXR 0x0200 /* shv Context Register */ 15 #define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ 16 #define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ 17 #define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ 18 #define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ 19 #define AC_M_RESET 0x0700 /* hv Reset Reg */ 20 #define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ 21 #define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ [all …]
|
/Linux-v6.6/Documentation/devicetree/bindings/gpio/ |
D | gpio-mpc8xxx.txt | 12 0 = active high 24 reg = <0x1100 0x080>; 25 interrupts = <78 0x8>; 32 reg = <0x0 0x2300000 0x0 0x10000>; 33 interrupts = <0 36 0x4>; /* Level high type */ 46 reg = <0x0 0x2300000 0x0 0x10000>;
|
/Linux-v6.6/drivers/net/ethernet/synopsys/ |
D | dwc-xlgmac-reg.h | 22 #define MAC_TCR 0x0000 23 #define MAC_RCR 0x0004 24 #define MAC_PFR 0x0008 25 #define MAC_HTR0 0x0010 26 #define MAC_VLANTR 0x0050 27 #define MAC_VLANHTR 0x0058 28 #define MAC_VLANIR 0x0060 29 #define MAC_Q0TFCR 0x0070 30 #define MAC_RFCR 0x0090 31 #define MAC_RQC0R 0x00a0 [all …]
|
/Linux-v6.6/arch/s390/include/asm/fpu/ |
D | internal.h | 19 " la 1,%0\n" in save_vx_regs() 20 " .word 0xe70f,0x1000,0x003e\n" /* vstm 0,15,0(1) */ in save_vx_regs() 21 " .word 0xe70f,0x1100,0x0c3e\n" /* vstm 16,31,256(1) */ in save_vx_regs() 29 for (i = 0; i < __NUM_FPRS; i++) in convert_vx_to_fp() 37 for (i = 0; i < __NUM_FPRS; i++) in convert_fp_to_vx() 43 fpregs->pad = 0; in fpregs_store()
|
/Linux-v6.6/Documentation/devicetree/bindings/rtc/ |
D | qcom-pm8xxx-rtc.yaml | 66 reg = <0x0c440000 0x1100>; 68 #size-cells = <0>; 69 pmicintc: pmic@0 { 70 reg = <0x0 SPMI_USID>; 76 #size-cells = <0>; 80 reg = <0x11d>; 81 interrupts = <0x27 0>;
|
/Linux-v6.6/Documentation/devicetree/bindings/ata/ |
D | ahci-mtk.txt | 33 reg = <0 0x1a200000 0 0x1100>; 44 ports-implemented = <0x1>;
|
/Linux-v6.6/include/linux/soc/samsung/ |
D | exynos-regs-pmu.h | 17 #define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200 21 #define S5P_CENTRAL_SEQ_OPTION 0x0208 42 #define EXYNOS_SWRESET 0x0400 44 #define S5P_WAKEUP_STAT 0x0600 46 #define EXYNOS_EINT_WAKEUP_MASK_DISABLED 0xffffffff 47 #define EXYNOS_EINT_WAKEUP_MASK 0x0604 48 #define S5P_WAKEUP_MASK 0x0608 49 #define S5P_WAKEUP_MASK2 0x0614 52 #define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4) 54 #define EXYNOS4_PHY_ENABLE (1 << 0) [all …]
|
/Linux-v6.6/drivers/net/wan/ |
D | slic_ds26522.h | 10 #define DS26522_RF_ADDR_START 0x00 11 #define DS26522_RF_ADDR_END 0xef 12 #define DS26522_GLB_ADDR_START 0xf0 13 #define DS26522_GLB_ADDR_END 0xff 14 #define DS26522_TF_ADDR_START 0x100 15 #define DS26522_TF_ADDR_END 0x1ef 16 #define DS26522_LIU_ADDR_START 0x1000 17 #define DS26522_LIU_ADDR_END 0x101f 18 #define DS26522_TEST_ADDR_START 0x1008 19 #define DS26522_TEST_ADDR_END 0x101f [all …]
|
/Linux-v6.6/drivers/net/ethernet/intel/ixgbe/ |
D | ixgbe_model.h | 32 input->filter.formatted.src_ip[0] = (__force __be32)val; in ixgbe_mat_prgm_sip() 33 mask->formatted.src_ip[0] = (__force __be32)m; in ixgbe_mat_prgm_sip() 34 return 0; in ixgbe_mat_prgm_sip() 41 input->filter.formatted.dst_ip[0] = (__force __be32)val; in ixgbe_mat_prgm_dip() 42 mask->formatted.dst_ip[0] = (__force __be32)m; in ixgbe_mat_prgm_dip() 43 return 0; in ixgbe_mat_prgm_dip() 58 input->filter.formatted.src_port = (__force __be16)(val & 0xffff); in ixgbe_mat_prgm_ports() 59 mask->formatted.src_port = (__force __be16)(m & 0xffff); in ixgbe_mat_prgm_ports() 63 return 0; in ixgbe_mat_prgm_ports() 67 {.off = 0, .val = ixgbe_mat_prgm_ports, [all …]
|
/Linux-v6.6/drivers/video/fbdev/ |
D | smscufx.c | 35 ({ if (status < 0) pr_warn(fmt, ##args); }) 38 ({ if (status < 0) { pr_warn(fmt, ##args); return status; } }) 41 ({ if (status < 0) { pr_warn(fmt, ##args); goto error; } }) 45 #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 46 #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 55 #define UFX_IOCTL_RETURN_EDID (0xAD) 56 #define UFX_IOCTL_REPORT_DAMAGE (0xAA) 100 atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */ 111 .xpanstep = 0, 112 .ypanstep = 0, [all …]
|