Searched refs:activated (Results 1 – 23 of 23) sorted by relevance
32 activated during the firmware boot-up process. If disabled,33 the retention mode will not be activated.
20 int "RH [%] threshold above which the heater will be activated"
53 When this option is activated, the descriptors for DMA transfer are
60 if activated then data ready trigger can't be set up.
28 be activated. Any board with Arduino headers can for example build the sample
19 set to 0 it means log will not be activated for those modules.
537 These commands are activated by :kconfig:option:`CONFIG_SHELL_CMDS` set to ``y``.570 This feature is activated by588 This feature enables commands history in the shell. It is activated by:611 This feature is activated by :kconfig:option:`CONFIG_SHELL_WILDCARD` set to ``y``.656 This feature is activated by :kconfig:option:`CONFIG_SHELL_METAKEYS` set to ``y``.666 in the FreeBSD project. This feature is activated by:706 Thread safe getopt functionality is activated by724 This feature is activated upon startup by :kconfig:option:`CONFIG_SHELL_START_OBSCURED`744 This feature is activated by: :kconfig:option:`CONFIG_SHELL_LOG_BACKEND` set to ``y``.
33 activated at runtime by the application. The VLAN API provides a
74 When this option is activated, the buffers for DMA transfer are
54 #error DTCM for DMA buffer is activated but zephyr,dtcm is not present in dts
245 Once activated your shell will be prefixed with ``(.venv)``. The297 Once activated your shell will be prefixed with ``(.venv)``. The365 Once activated your shell will be prefixed with ``(.venv)``. The
77 coin cell to prevent suppression diodes in the nRF52840 silicon being activated
125 * Lazy stacking is activated by default on threads that are pretagged with127 * Lazy stacking is activated dynamically on threads that are not pretagged with
628 * When this device is fully activated via its driver, it takes
290 The boot loader is activated by the boot-load-enable slide switch (SW2).
187 element begins with ``-``. The project is activated if the element
338 Boot load is activated by boot load enable slide switch SW5.
88 system needs as multiple services can be activated at the same time
60 actived||activated
559 stacking in regular interrupts (FP state preservation is only activated in the
1082 be activated using the ``--integration`` option of twister and narrows down
1711 * :github:`28014` - tests: kernel: mem_protect: sys_sem: failed when CONFIG_FPU is activated
3098 …ithub:`53231` - drivers/flash/flash_stm32l5_u5.c : unable to use full 2MB flash with TF-M activated
