| /Zephyr-latest/drivers/clock_control/ |
| D | clock_control_si32_ahb.c | 25 uint32_t freq; member
43 *rate = config->freq; in clock_control_si32_ahb_get_rate()
62 if (config->freq != 20000000) { in clock_control_si32_ahb_init()
63 uint32_t freq = config->freq; in clock_control_si32_ahb_init() local
65 ret = clock_control_set_rate(config->clock_dev, NULL, &freq); in clock_control_si32_ahb_init()
79 if (config->freq > 80000000) { in clock_control_si32_ahb_init()
81 } else if (config->freq > 53000000) { in clock_control_si32_ahb_init()
83 } else if (config->freq > 26000000) { in clock_control_si32_ahb_init()
99 .freq = DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency),
|
| D | clock_control_si32_pll.c | 28 uint32_t freq; member
36 if (data->freq == 0) { in clock_control_si32_pll_on()
42 if (data->freq > 80000000) { in clock_control_si32_pll_on()
44 } else if (data->freq > 76500000) { in clock_control_si32_pll_on()
46 } else if (data->freq > 62000000) { in clock_control_si32_pll_on()
48 } else if (data->freq > 49500000) { in clock_control_si32_pll_on()
50 } else if (data->freq > 35000000) { in clock_control_si32_pll_on()
52 } else if (data->freq > 23000000) { in clock_control_si32_pll_on()
61 const uint32_t div_n = (data->freq / source_clock_freq) * (div_m + 1) - 1; in clock_control_si32_pll_on()
100 *rate = data->freq; in clock_control_si32_pll_get_rate()
[all …]
|
| D | clock_control_rts5912_sccon.c | 132 uint32_t src, divide, freq = 0; in rts5912_clock_control_get_rate() local
147 freq = src >> divide; in rts5912_clock_control_get_rate()
150 (src == PLL_FREQ) ? "PLL" : "RC25M", BIT(divide), freq); in rts5912_clock_control_get_rate()
155 freq = src >> divide; in rts5912_clock_control_get_rate()
158 BIT(divide), freq); in rts5912_clock_control_get_rate()
173 freq = src / divide; in rts5912_clock_control_get_rate()
176 freq = src / 6; in rts5912_clock_control_get_rate()
180 freq = src / 8; in rts5912_clock_control_get_rate()
184 freq = src / 12; in rts5912_clock_control_get_rate()
188 freq = src / 16; in rts5912_clock_control_get_rate()
[all …]
|
| D | clock_control_renesas_cpg_mssr.c | 136 int64_t freq = -ENOTSUP; in rcar_cpg_get_in_update_out_freq() local
140 return freq; in rcar_cpg_get_in_update_out_freq()
146 return freq; in rcar_cpg_get_in_update_out_freq()
154 freq = rcar_cpg_get_in_update_out_freq(dev, parent_clk); in rcar_cpg_get_in_update_out_freq()
155 if (freq < 0) { in rcar_cpg_get_in_update_out_freq()
156 return freq; in rcar_cpg_get_in_update_out_freq()
161 freq = rcar_cpg_update_out_freq(dev, clk_info); in rcar_cpg_get_in_update_out_freq()
162 if (freq < 0) { in rcar_cpg_get_in_update_out_freq()
163 return freq; in rcar_cpg_get_in_update_out_freq()
171 int64_t freq; in rcar_cpg_get_out_freq() local
[all …]
|
| D | beetle_clock_control.c | 29 uint32_t freq; member
138 uint32_t nc_mainclk = beetle_round_freq(cfg->freq); in beetle_clock_control_get_subsys_rate()
229 if (cfg->freq != MAINCLK_BASE_FREQ) { in beetle_clock_control_init()
230 beetle_pll_enable(cfg->freq); in beetle_clock_control_init()
239 .freq = DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency),
|
| /Zephyr-latest/modules/hal_nordic/nrfs/dvfs/ |
| D | ld_dvfs_handler.c | 227 LOG_DBG("DVFS handler EVT_OPPOINT_REQ_CONFIRMED %d", (uint32_t)p_evt->freq); in nrfs_dvfs_evt_handler()
228 if (dvfs_service_handler_get_requested_oppoint() == p_evt->freq) { in nrfs_dvfs_evt_handler()
229 dvfs_service_update_core_clock(p_evt->freq); in nrfs_dvfs_evt_handler()
231 dvfs_frequency_change_applied_clb(p_evt->freq); in nrfs_dvfs_evt_handler()
239 if (dvfs_service_handler_is_downscaling(p_evt->freq)) { in nrfs_dvfs_evt_handler()
241 dvfs_service_handler_prepare_to_scale(p_evt->freq); in nrfs_dvfs_evt_handler()
244 dvfs_service_handler_scaling_background_job(p_evt->freq); in nrfs_dvfs_evt_handler()
248 static enum dvfs_frequency_setting freq; in nrfs_dvfs_evt_handler() local
250 freq = p_evt->freq; in nrfs_dvfs_evt_handler()
252 (void *)&freq); in nrfs_dvfs_evt_handler()
[all …]
|
| /Zephyr-latest/drivers/sensor/ |
| D | sensor_clock_external.c | 17 static uint32_t freq; variable
29 freq = counter_get_frequency(external_sensor_clock); in external_sensor_clock_init()
30 if (freq == 0) { in external_sensor_clock_init()
60 return (cycles * NSEC_PER_SEC) / freq; in sensor_clock_cycles_to_ns()
|
| /Zephyr-latest/drivers/pwm/ |
| D | pwm_led_esp32.c | 43 uint32_t freq; member
115 uint32_t max_precision_n = channel->clock_src_hz / channel->freq; in pwm_led_esp32_calculate_max_resolution()
179 __ASSERT_NO_MSG(channel->freq > 0); in pwm_led_esp32_timer_set()
181 prescaler = ((uint64_t)channel->clock_src_hz << 8) / channel->freq / precision; in pwm_led_esp32_timer_set()
228 uint32_t current_freq = channel->freq; in pwm_led_esp32_channel_update_frequency()
238 channel->freq = (uint32_t)(clk_freq / period_cycles); in pwm_led_esp32_channel_update_frequency()
240 if (!channel->freq) { in pwm_led_esp32_channel_update_frequency()
241 channel->freq = 1; in pwm_led_esp32_channel_update_frequency()
244 if (channel->freq == current_freq) { in pwm_led_esp32_channel_update_frequency()
256 if (ch->freq && (channel->channel_num != ch->channel_num) && in pwm_led_esp32_channel_update_frequency()
[all …]
|
| /Zephyr-latest/drivers/sensor/tdk/icm42x70/ |
| D | icm42x70.c | 74 uint16_t freq; in convert_dt_enum_to_freq() local
78 freq = 0; in convert_dt_enum_to_freq()
81 freq = 1600; in convert_dt_enum_to_freq()
84 freq = 800; in convert_dt_enum_to_freq()
87 freq = 400; in convert_dt_enum_to_freq()
90 freq = 200; in convert_dt_enum_to_freq()
93 freq = 100; in convert_dt_enum_to_freq()
96 freq = 50; in convert_dt_enum_to_freq()
99 freq = 25; in convert_dt_enum_to_freq()
102 freq = 12; in convert_dt_enum_to_freq()
[all …]
|
| /Zephyr-latest/drivers/i2c/ |
| D | i2c_gd32.c | 495 uint32_t pclk1, freq, clkc; in i2c_gd32_configure() local
508 freq = pclk1 / 1000000U; in i2c_gd32_configure()
509 if (freq > I2CCLK_MAX) { in i2c_gd32_configure()
511 I2CCLK_MAX, freq); in i2c_gd32_configure()
547 if (freq < I2CCLK_MIN) { in i2c_gd32_configure()
549 I2CCLK_MIN, freq); in i2c_gd32_configure()
554 I2C_CTL1(cfg->reg) |= freq; in i2c_gd32_configure()
557 if (freq == I2CCLK_MAX) { in i2c_gd32_configure()
560 I2C_RT(cfg->reg) = freq + 1U; in i2c_gd32_configure()
573 if (freq < I2CCLK_FM_MIN) { in i2c_gd32_configure()
[all …]
|
| /Zephyr-latest/tests/drivers/spi/spi_loopback/boards/ |
| D | nucleo_h723zg.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| D | nucleo_h743zi.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| D | nucleo_h745zi_q_stm32h745xx_m4.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| D | nucleo_h745zi_q_stm32h745xx_m7.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| D | nucleo_h753zi.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| /Zephyr-latest/drivers/counter/ |
| D | counter_mcux_qtmr.c | 43 uint32_t freq; member
254 return data->freq; in mcux_qtmr_get_freq()
270 data->freq = config->info.freq; in mcux_qtmr_init()
279 &data->freq)) { in mcux_qtmr_init()
283 data->freq /= qtmr_primary_source_divider[config->qtmr_config.primarySource - in mcux_qtmr_init()
314 .freq = DT_INST_PROP_OR(n, freq, 0), \
|
| D | counter_dw_timer.c | 49 uint32_t freq; member
72 uint32_t freq; member
292 return data->freq; in counter_dw_timer_get_freq()
296 return config->freq; in counter_dw_timer_get_freq()
331 timer_config->clkid, &data->freq); in counter_dw_timer_init()
362 .freq = DT_INST_PROP(inst, clock_frequency), \
365 .freq = 0, \
|
| /Zephyr-latest/tests/drivers/spi/spi_loopback/ |
| D | overlay-stm32-spi-16bits.overlay | 7 /* Set div-q to get test clk freq into acceptable SPI freq range */
|
| /Zephyr-latest/tests/boards/espressif/rtc_clk/ |
| D | README.rst | 68 Testing RTC FAST CLK freq: 20000000 MHz
69 Testing RTC FAST CLK freq: 17500000 MHz
73 Testing RTC SLOW CLK freq: 136000 MHz
74 Testing RTC SLOW CLK freq: 68359 MHz
|
| /Zephyr-latest/drivers/ieee802154/ |
| D | ieee802154_cc1200.c | 224 static bool write_reg_freq(const struct device *dev, uint32_t freq) in write_reg_freq() argument
228 freq_data[0] = (uint8_t)((freq & 0x00FF0000) >> 16); in write_reg_freq()
229 freq_data[1] = (uint8_t)((freq & 0x0000FF00) >> 8); in write_reg_freq()
230 freq_data[2] = (uint8_t)(freq & 0x000000FF); in write_reg_freq()
272 uint32_t freq = 0U; in rf_evaluate_freq_setting() local
304 freq += freq_tmp; in rf_evaluate_freq_setting()
312 LOG_DBG("FREQ is 0x%06X", freq); in rf_evaluate_freq_setting()
314 return freq; in rf_evaluate_freq_setting()
547 uint32_t freq; in cc1200_set_channel() local
569 freq = rf_evaluate_freq_setting(dev, channel); in cc1200_set_channel()
[all …]
|
| /Zephyr-latest/drivers/sensor/st/lsm6dso16is/ |
| D | lsm6dso16is_shub.c | 83 uint8_t i2c_addr, uint16_t freq) in lsm6dso16is_lis2mdl_odr_set() argument
88 if (freq <= lis2mdl_map[odr]) { in lsm6dso16is_lis2mdl_odr_set()
94 LOG_DBG("shub: LIS2MDL freq val %d not supported.", freq); in lsm6dso16is_lis2mdl_odr_set()
179 uint8_t i2c_addr, uint16_t freq) in lsm6dso16is_hts221_odr_set() argument
184 if (freq <= hts221_map[odr]) { in lsm6dso16is_hts221_odr_set()
190 LOG_DBG("shub: HTS221 freq val %d not supported.", freq); in lsm6dso16is_hts221_odr_set()
292 uint8_t i2c_addr, uint16_t freq) in lsm6dso16is_lps22hh_odr_set() argument
297 if (freq <= lps22hh_map[odr]) { in lsm6dso16is_lps22hh_odr_set()
303 LOG_DBG("shub: LPS22HH freq val %d not supported.", freq); in lsm6dso16is_lps22hh_odr_set()
372 uint8_t i2c_addr, uint16_t freq) in lsm6dso16is_lps22df_odr_set() argument
[all …]
|
| /Zephyr-latest/drivers/sensor/st/lsm6dsv16x/ |
| D | lsm6dsv16x_shub.c | 83 uint8_t i2c_addr, uint16_t freq) in lsm6dsv16x_lis2mdl_odr_set() argument
88 if (freq <= lis2mdl_map[odr]) { in lsm6dsv16x_lis2mdl_odr_set()
94 LOG_DBG("shub: LIS2MDL freq val %d not supported.", freq); in lsm6dsv16x_lis2mdl_odr_set()
179 uint8_t i2c_addr, uint16_t freq) in lsm6dsv16x_hts221_odr_set() argument
184 if (freq <= hts221_map[odr]) { in lsm6dsv16x_hts221_odr_set()
190 LOG_DBG("shub: HTS221 freq val %d not supported.", freq); in lsm6dsv16x_hts221_odr_set()
292 uint8_t i2c_addr, uint16_t freq) in lsm6dsv16x_lps22hh_odr_set() argument
297 if (freq <= lps22hh_map[odr]) { in lsm6dsv16x_lps22hh_odr_set()
303 LOG_DBG("shub: LPS22HH freq val %d not supported.", freq); in lsm6dsv16x_lps22hh_odr_set()
372 uint8_t i2c_addr, uint16_t freq) in lsm6dsv16x_lps22df_odr_set() argument
[all …]
|
| /Zephyr-latest/boards/gaisler/gr716a_mini/ |
| D | board.cmake | 7 set(TSIM_SYS -freq 20 -gr716)
|
| /Zephyr-latest/drivers/sensor/st/lsm9ds1/ |
| D | lsm9ds1.c | 99 static int lsm9ds1_accel_freq_to_odr_val(uint16_t freq) in lsm9ds1_accel_freq_to_odr_val() argument
104 if (freq <= lsm9ds1_odr_map[i]) { in lsm9ds1_accel_freq_to_odr_val()
112 static int lsm9ds1_gyro_freq_to_odr_val(uint16_t freq) in lsm9ds1_gyro_freq_to_odr_val() argument
117 if (freq <= lsm9ds1_gyro_odr_map[i]) { in lsm9ds1_gyro_freq_to_odr_val()
176 static int lsm9ds1_gyro_odr_set(const struct device *dev, uint16_t freq) in lsm9ds1_gyro_odr_set() argument
182 odr = lsm9ds1_gyro_freq_to_odr_val(freq); in lsm9ds1_gyro_odr_set()
210 static int lsm9ds1_accel_odr_set(const struct device *dev, uint16_t freq) in lsm9ds1_accel_odr_set() argument
229 odr = lsm9ds1_gyro_freq_to_odr_val(freq); in lsm9ds1_accel_odr_set()
252 odr = lsm9ds1_accel_freq_to_odr_val(freq); in lsm9ds1_accel_odr_set()
|
| /Zephyr-latest/soc/snps/arc_iot/ |
| D | sysconf.c | 76 int32_t arc_iot_pll_fout_config(uint32_t freq) in arc_iot_pll_fout_config() argument
80 if (freq == PLL_CLK_IN) { in arc_iot_pll_fout_config()
85 if (pll_configuration[i].fout == freq) { in arc_iot_pll_fout_config()
95 if (freq > 100) { in arc_iot_pll_fout_config()
|
