| /hal_espressif-latest/components/bt/ |
| D | Kconfig | 7 … Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.
20 This option is recommended for classic Bluetooth or for dual-mode
26 This option is recommended for BLE only usecases to save on memory
32 This option is recommended when you want to communicate directly with the
49 This option is recommended for Bluetooth controller usecases
54 This option is recommended for Bluetooth Host only usecases
78 This option release Bluetooth text section and merge Bluetooth data, bss & text into
82 So this option will disable the PMP (ESP_SYSTEM_PMP_IDRAM_SPLIT)
89 … This option is used to enable bluetooth debug mode, which saves the hci layer data stream.
97 … This option is to configure the buffer size of the hci data steam cache in hci debug mode.
[all …]
|
| /hal_espressif-latest/components/newlib/ |
| D | Kconfig | 7 This option allows configuring the desired line endings sent to UART
17 This option doesn't affect behavior of the UART driver (drivers/uart.h).
31 This option allows configuring which input sequence on UART produces
41 This option doesn't affect behavior of the UART driver (drivers/uart.h).
57 formatting option. This option doesn't support 64-bit integer formats and C99
60 For more details about "nano" formatting option, please see newlib readme file,
64 … If this option is enabled and the ROM contains functions from newlib-nano, the build system
75 option disabled.
87 This is the default, and the recommended option.
|
| /hal_espressif-latest/components/bt/esp_ble_mesh/ |
| D | Kconfig.in | 15 Enable this option to allow using random advertising interval
29 Enable this option to allow using specific duplicate scan filter
31 option in the Bluetooth Controller section in menuconfig, which is
67 Enable this option to use the default memory allocation strategy when
85 Enable this option to use FreeRTOS static allocation APIs for BLE Mesh,
88 If this option is disabled, the FreeRTOS static allocation APIs will not
159 Enable this option to allow BLE Mesh fast provisioning solution to be used.
162 When this option is enabled, and after an unprovisioned device is provisioned
168 Enable the device to be provisioned into a node. This option should be
175 Enable the device to be a Provisioner. The option should be enabled when
[all …]
|
| /hal_espressif-latest/components/wpa_supplicant/ |
| D | COPYING | 13 the BSD license option for future distribution. As such, the GPL v2
14 license option is no longer used. It should be noted that the BSD
15 license option (the one with advertisement clause removed) is compatible
22 after February 11, 2012 is no longer under the GPL v2 option.
|
| /hal_espressif-latest/components/esp_adc/ |
| D | Kconfig | 26 This option will allow the ADC calibration component to characterize the
33 Some ESP32s have Vref burned into eFuse BLOCK0. This option will allow
41 This option will allow the ADC calibration component to use Lookup Tables
43 do not exhibit non-linear behavior hence will not be affected by this option.
56 Disable this option so as to measure the output of DAC by internal ADC, for test usage.
66 … If you stick to this, you can enable this option to force use ADC2 under above conditions.
77 … If you stick to this, you can enable this option to force use ADC2 under above conditions.
|
| /hal_espressif-latest/components/esp_system/port/soc/esp32/ |
| D | Kconfig.memory | 8 This option allows to place .rtc_data and .rtc_rodata sections into
10 This option depends on the CONFIG_FREERTOS_UNICORE option because RTC fast memory
17 … If this option is disabled, the DRAM part of the heap starts right after the .bss section,
21 … If this option is enabled, the DRAM part of the heap starts right after the dram0_0 region,
51 … If booting an app on an older bootloader from before this option was introduced, the app will fail
|
| /hal_espressif-latest/components/esp_wifi/ |
| D | Kconfig | 97 … it caches the uplayer packets to a dedicated buffer queue, this option is used to configure the
153 Select this option to enable CSI(Channel State Information) feature. CSI takes about
161 Select this option to enable AMPDU TX feature
180 Select this option to enable AMPDU RX feature
202 Select this option to enable AMSDU TX feature
208 Select this option to enable WiFi NVS flash
260 Select this option to place frequently called Wi-Fi library functions in IRAM.
261 When this option is disabled, more than 10Kbytes of IRAM memory will be saved
269 Select this option to place additional frequently called Wi-Fi library functions
270 in IRAM. When this option is disabled, more than 5Kbytes of IRAM memory will be saved
[all …]
|
| /hal_espressif-latest/components/esp_hw_support/port/esp32/ |
| D | Kconfig.rtc | 7 - "Internal 150kHz oscillator" option provides lowest deep sleep current
20 - "Internal 8.5MHz oscillator divided by 256" option results in higher
49 project configuration to minimum revision ECO3 will disable this option, , allow
52 - "None" option will not provide additional current to external crystal
53 - "Method 1" option can't ensure 100% to solve the external 32k crystal start failed
55 - "Method 2" option can solve the external 32k issue, but the touchpad can't work
75 frequency. This option sets the number of RTC_SLOW_CLK cycles measured
80 When this option is set to 0, clock calibration will not be performed at
95 Increase this option if the 32k crystal oscillator
|
| /hal_espressif-latest/components/spi_flash/ |
| D | Kconfig | 11 When this option is selected, the patch will be enabled for XMC.
43 …enable this option as a confirmation. To be back-compatible with earlier IDF version, this option …
47 …# Not using name of SPI_FLASH_HPM_ENABLE because it was used as an invisible option and we don't w…
62 This option is invisible, and will be selected automatically
91 This option is disabled by default because it is supported only
102 before enabling this option.
111 config option to keep the legacy behavior.
126 If this option is enabled, any time SPI flash is written then the data will be read
135 If this option is enabled, if SPI flash write verification fails then a log error line
144 … If this option is enabled, any SPI flash write which tries to set zero bits in the flash to
[all …]
|
| /hal_espressif-latest/components/esp_hw_support/port/esp32c6/ |
| D | Kconfig.rtc | 19 … To be able to select this option, please select `RTC_CLK_SRC_USE_DANGEROUS_RC32K_ALLOWED` first.
20 This option will be removed in IDF v6.0.
37 frequency. This option sets the number of RTC_SLOW_CLK cycles measured
42 When this option is set to 0, clock calibration will not be performed at
|
| /hal_espressif-latest/components/esp_pm/ |
| D | Kconfig | 9 This option has run-time overhead (increased interrupt latency,
12 Enable this option if application uses power management APIs.
78 …Waring: If you want to enable this option on ESP32, you should enable `GPIO_ESP32_SUPPORT_SWITCH_S…
90 This option is invisible to users, and it is only used for ci testing,
100 option will consume 1.68 KB of internal RAM and will reduce sleep current consumption
101 by about 100 uA. On esp32s3 soc, enabling this option will consume 8.58 KB of internal
110 … cache configuration, if this option is enabled, it will consume up to 9 KB of internal RAM.
119 … time to keep the system running. Enabling this option will increase static RAM and heap usage,
124 … Note1: Please use this option with caution, the current IDF does not support the retention of
128 … before enabling this option, peripherals sleep retention driver support status is tracked in
[all …]
|
| /hal_espressif-latest/components/esp_hw_support/port/esp32s2/ |
| D | Kconfig.rtc | 7 - "Internal 90kHz oscillator" option provides lowest deep sleep current
18 - "Internal 8MHz oscillator divided by 256" option results in higher
43 frequency. This option sets the number of RTC_SLOW_CLK cycles measured
48 When this option is set to 0, clock calibration will not be performed at
63 Increase this option if the 32k crystal oscillator
|
| /hal_espressif-latest/components/esp_system/port/soc/esp32s2/ |
| D | Kconfig.memory | 7 This option allows to place .rtc_data and .rtc_rodata sections into
14 … If this option is disabled, the DRAM part of the heap starts right after the .bss section,
18 … If this option is enabled, the DRAM part of the heap starts right after the dram0_0 region,
|
| /hal_espressif-latest/components/esp_system/port/soc/esp32s3/ |
| D | Kconfig.memory | 7 This option allows to place .rtc_data and .rtc_rodata sections into
14 … If this option is disabled, the DRAM part of the heap starts right after the .bss section,
18 … If this option is enabled, the DRAM part of the heap starts right after the dram0_0 region,
|
| /hal_espressif-latest/components/bootloader/ |
| D | Kconfig.projbuild | 16 This option sets compiler optimization level (gcc -O argument)
90 The option "Use custom SPI Flash WP Pin" must be set or this value is ignored
106 XMC chips will be forbidden to be used, when this option is disabled.
131 If this option is enabled, and VDDSDIO LDO is set to 1.8V (using eFuse
136 This option has no effect if VDDSDIO is set to 3.3V, or if the internal
270 … If this option is set, the ESP-IDF app must explicitly reset, feed, or disable the rtc_wdt in
272 … If this option is not set (default), then rtc_wdt will be disabled by ESP-IDF before calling
306 … This option prevents rollback to previous firmware/application image with lower security version.
316 … for storing the security version is limited (see BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD option).
348 … This option allows to emulate read/write operations with all eFuses and efuse secure version.
[all …]
|
| /hal_espressif-latest/components/xtensa/ |
| D | project_include.cmake | 3 …# without '--target' option 'clang -dumpmachine' prints default target arch and it might be not Xt…
4 # so use `-print-targets` option
|
| /hal_espressif-latest/components/bt/host/nimble/ |
| D | Kconfig.in | 77 along with this option. Similarly for ESP32-C3 or ESP32-S3, user is expected to
180 If enabled this option, Bluedroid will assign a new randomly-generated IRK
211 If this option is enabled, SM uses predefined DH key pair as described
319 This option sets the source of the shared msys mbuf memory between
321 this option is sets, from the mempool otherwise.
406 Enable this option to send number-of-completed-packets event to
449 Enable this option to allow the device to be provisioned over
459 Enable this option to allow the device to be provisioned over the GATT
468 This option enables support for the Mesh GATT Proxy Service,
484 Enable this option to be able to act as a Low Power Node
[all …]
|
| /hal_espressif-latest/components/esp_common/ |
| D | Kconfig | 8 …pre-generated lookup table. This option can be used to turn off the use of the look-up table in or…
13 # Invisible option that is set by SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY, but
|
| /hal_espressif-latest/components/esp_system/ |
| D | Kconfig | 67 # This is a High Layer Kconfig option, invisible, can be selected by other Kconfig option
73 # This is a High Layer Kconfig option, invisible, can be selected by other Kconfig option
111 This config option allows to add RTC fast memory region to system heap with capability
122 …perform backtracing when panics occur. Activating this option will activate asynchronous frame unw…
124 …100% larger). The main purpose of this option is to be able to have a backtrace parsed and printed…
126 This option shall NOT be used for production.
226 - On chips with USB OTG peripheral, "USB CDC" option redirects output to the
227 CDC port. This option uses the CDC driver in the chip ROM.
228 This option is incompatible with TinyUSB stack.
229 - On chips with an USB serial/JTAG debug controller, selecting the option
[all …]
|
| /hal_espressif-latest/components/esp_hw_support/ |
| D | Kconfig | 13 update the version field in eFuse, you can enable this option to force the
53 … and you still want to use this chip, you can enable this option to bypass such an error.
65 # This is here since this option affect behavior of esp_light_sleep_start
75 …This option will power down flash under a strict but relatively safe condition. Also, it is possib…
89 … Select this option will set the CS pin of Flash to PULL-UP state during sleep, but this will
91 … If you are developing with esp32xx modules, you must select this option, but if you are developing
94 … (!!! Don't deselect this option if you don't have external SPI Flash CS pin pullups.)
105 … Select this option will set the CS pin of PSRAM to PULL-UP state during sleep, but this will
107 … If you are developing with esp32xx modules, you must select this option, but if you are developing
110 (!!! Don't deselect this option if you don't have external PSRAM CS pin pullups.)
[all …]
|
| /hal_espressif-latest/components/esp_psram/ |
| D | CMakeLists.txt | 36 # Note: Adding as a PUBLIC compile option here causes this option to propagate to all
41 # also, make sure we link with this option so correct toolchain libs are pulled in
|
| /hal_espressif-latest/tools/esptool_py/docs/en/esptool/ |
| D | basic-commands.rst | 52 …sfer data is compressed for better performance. The ``-u/--no-compress`` option disables this beha…
60 Use the ``-e/--erase-all`` option to erase all flash sectors (not just the write areas) before prog…
70 …This behavior can be overridden with the ``--force`` option. **Use this only at your own risk and …
78 …ypted firmware (bootloader, application, etc.) without the ``--encrypt`` option is disabled, if `F…
82 …ncrypted firmware (bootloader, application, etc.) without the ``--encrypt`` option is disabled, if:
89 …This behavior can be overridden with the ``--force`` option. **Use this option provided that the f…
97 This behavior can be overridden with the ``--force`` option.
153 …This behavior can be overridden with the ``--force`` option. **Use this only at your own risk and …
195 …6 digest would be invalidated by rewriting the image header. There is an option to skip appending …
197 …ment in the binary executable. To use segments (PHDRs) instead, pass the ``--use_segments`` option.
[all …]
|
| /hal_espressif-latest/components/bt/controller/esp32/ |
| D | Kconfig.in | 180 Normal option. Mostly, choose this VHCI when bluetooth host run on ESP32, too.
186 choose this option.
249 - "Main crystal" option provides good accuracy and can support Dynamic Frequency Scaling
251 … - "External 32kHz crystal" option allows user to use a 32.768kHz crystal as Bluetooth low
252 power clock. This option is allowed as long as External 32kHz crystal is configured as
253 the system RTC clock source. This option provides good accuracy and supports Bluetooth
259 … Main crystal can be used as low power clock for bluetooth modem sleep. If this option is
288 - "151ppm to 250ppm" option is the default value for Bluetooth Dual mode
289 … - "251ppm to 500ppm" option can be used in BLE only mode when using external 32kHz crystal as
290 … low power clock. This option is provided in case that BLE sleep clock has a lower level of
[all …]
|
| /hal_espressif-latest/components/bt/controller/esp32c3/ |
| D | Kconfig.in | 57 Normal option. Mostly, choose this VHCI when bluetooth host run on ESP32S3 or ESP32C3.
63 choose this option.
401 … Main crystal can be used as low power clock for bluetooth modem sleep. If this option is
418 … in Bluetooth communication, so don't select this option in scenarios such as BLE connection state.
426 …If this option is selected, the main crystal will power up during light sleep when the low power c…
476 When this option is enabled, auxiliary packets will be present in the events of
478 …If this option is not enabled, auxiliary packets will only be present when the advertising length …
484 If this option is enabled, The Controller will records the communication quality
491 … If this option is disabled, The Controller will not start the LE authenticated payload timer.
492 This option is used for some compatibility problems related to LE ping procedure.
[all …]
|
| /hal_espressif-latest/tools/esptool_py/espsecure/esp_hsm_sign/ |
| D | __init__.py | 36 for option in section_options:
37 if not config.has_option(section, option):
38 raise configparser.NoOptionError(option, section)
|
