Lines Matching refs:option

52 …sfer data is compressed for better performance. The ``-u/--no-compress`` option disables this beha…
60 Use the ``-e/--erase-all`` option to erase all flash sectors (not just the write areas) before prog…
70 …This behavior can be overridden with the ``--force`` option. **Use this only at your own risk and …
78 …ypted firmware (bootloader, application, etc.) without the ``--encrypt`` option is disabled, if `F…
82 …ncrypted firmware (bootloader, application, etc.) without the ``--encrypt`` option is disabled, if:
89 …This behavior can be overridden with the ``--force`` option. **Use this option provided that the f…
97     This behavior can be overridden with the ``--force`` option.
153 …This behavior can be overridden with the ``--force`` option. **Use this only at your own risk and …
195 …6 digest would be invalidated by rewriting the image header. There is an option to skip appending …
197 …ment in the binary executable. To use segments (PHDRs) instead, pass the ``--use_segments`` option.
201 …pp.elf-0x40000.bin``. You can alter the firmware file name prefix using the ``--output/-o`` option.
219 …guration is mainly applicable for use within the Espressif's SIMPLE_BOOT option from 3rd party OSe…
220 …This option makes only the RAM segments visible to the ROM bootloader placing them at the beginnin…
230 …quency and mode, or extended header information, use the ``--version 2`` option. This extended out…
263 *  The ``--format`` option will change the format of the output file. For more information about fo…
306 *  The ``--fill-flash-size SIZE`` option will pad the merged binary with `0xFF` bytes to the full f…
307 *  The ``--target-offset 0xNNN`` option will create a merged binary that should be flashed at the s…
320 *  The ``--chunk-size`` option will set what portion of 512 byte block will be used for data. A com…
321 *  The ``--md5-disable`` option will disable MD5 checksums at the end of each block. This can be us…