Lines Matching refs:option
67 # This is a High Layer Kconfig option, invisible, can be selected by other Kconfig option
73 # This is a High Layer Kconfig option, invisible, can be selected by other Kconfig option
111 This config option allows to add RTC fast memory region to system heap with capability
122 …perform backtracing when panics occur. Activating this option will activate asynchronous frame unw…
124 …100% larger). The main purpose of this option is to be able to have a backtrace parsed and printed…
126 This option shall NOT be used for production.
226 - On chips with USB OTG peripheral, "USB CDC" option redirects output to the
227 CDC port. This option uses the CDC driver in the chip ROM.
228 This option is incompatible with TinyUSB stack.
229 - On chips with an USB serial/JTAG debug controller, selecting the option
253 This secondary option supports output through other specific port like USB_SERIAL_JTAG
264 … This option supports output through USB_SERIAL_JTAG port when the UART0 port is not connected.
271 # Internal option, indicates that console USB SERIAL JTAG is used
276 # Internal option, indicates that console UART is used (and not USB, for example)
384 Disabling this option saves about 1kB or RAM.
417 running. Enabling this option will enable the Task Watchdog Timer. It can be
435 Enabling this option will cause the Task Watchdog Timer to be initialized
443 If this option is enabled, the Task Watchdog Timer will be configured to
461 If this option is enabled, the Task Watchdog Timer will watch the CPU0
472 If this option is enabled, the Task Watchdog Timer will wach the CPU1
504 … If this option is disabled (default), the panic handler code is placed in flash not IRAM.
509 … If this option is enabled, the panic handler code (including required UART functions) is placed
595 …If this option is not enabled then the IPC task will keep behavior same as prior to that of ESP-ID…