Home
last modified time | relevance | path

Searched +full:tx +full:- +full:pwr +full:- +full:max (Results 1 – 25 of 29) sorted by relevance

12

/Zephyr-latest/boards/shields/nrf7002eb/
Dnrf7002eb.overlay4 * SPDX-License-Identifier: Apache-2.0
19 compatible = "nordic,nrf7002-spi";
22 spi-max-frequency = <DT_FREQ_M(8)>;
24 bucken-gpios = <&edge_connector 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
25 iovdd-ctrl-gpios = <&edge_connector 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
26 host-irq-gpios = <&edge_connector 19 GPIO_ACTIVE_HIGH>;
27 srrf-switch-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
33 wifi-max-tx-pwr-2g-dsss = <21>;
34 wifi-max-tx-pwr-2g-mcs0 = <16>;
35 wifi-max-tx-pwr-2g-mcs7 = <16>;
[all …]
/Zephyr-latest/boards/shields/nrf7002ek/
Dnrf7002ek_common_5g.dtsi4 * SPDX-License-Identifier: Apache-2.0
7 wifi-max-tx-pwr-5g-low-mcs0 = <13>;
8 wifi-max-tx-pwr-5g-low-mcs7 = <13>;
9 wifi-max-tx-pwr-5g-mid-mcs0 = <13>;
10 wifi-max-tx-pwr-5g-mid-mcs7 = <13>;
11 wifi-max-tx-pwr-5g-high-mcs0 = <12>;
12 wifi-max-tx-pwr-5g-high-mcs7 = <12>;
Dnrf7002ek_common.dtsi4 * SPDX-License-Identifier: Apache-2.0
10 iovdd-ctrl-gpios = <&arduino_header 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
12 bucken-gpios = <&arduino_header 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
14 host-irq-gpios = <&arduino_header 13 GPIO_ACTIVE_HIGH>;
16 /* Short-range (SR) co-existence */
18 srrf-switch-gpios = <&arduino_header 14 GPIO_ACTIVE_HIGH>;
20 /* Maximum TX power limits for 2.4 GHz */
21 wifi-max-tx-pwr-2g-dsss = <21>;
22 wifi-max-tx-pwr-2g-mcs0 = <16>;
23 wifi-max-tx-pwr-2g-mcs7 = <16>;
/Zephyr-latest/boards/nordic/nrf7002dk/
Dnrf70_common_5g.dtsi4 * SPDX-License-Identifier: Apache-2.0
7 wifi-max-tx-pwr-5g-low-mcs0 = <9>;
8 wifi-max-tx-pwr-5g-low-mcs7 = <9>;
9 wifi-max-tx-pwr-5g-mid-mcs0 = <11>;
10 wifi-max-tx-pwr-5g-mid-mcs7 = <11>;
11 wifi-max-tx-pwr-5g-high-mcs0 = <13>;
12 wifi-max-tx-pwr-5g-high-mcs7 = <13>;
Dnrf70_common.dtsi4 * SPDX-License-Identifier: Apache-2.0
7 iovdd-ctrl-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
8 bucken-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
9 host-irq-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
10 srrf-switch-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
12 wifi-max-tx-pwr-2g-dsss = <21>;
13 wifi-max-tx-pwr-2g-mcs0 = <16>;
14 wifi-max-tx-pwr-2g-mcs7 = <16>;
/Zephyr-latest/dts/bindings/ieee802154/
Datmel,rf2xx.yaml1 # Copyright (c) 2019-2020 Gerson Fernando Budke <nandojve@gmail.com>
2 # SPDX-License-Identifier: Apache-2.0
8 include: spi-device.yaml
11 irq-gpios:
12 type: phandle-array
15 reset-gpios:
16 type: phandle-array
19 slptr-gpios:
20 type: phandle-array
23 Multi-functional pin that controls sleep, deep sleep, transmit
[all …]
/Zephyr-latest/dts/bindings/wifi/
Dwifi-tx-power-5g.yaml2 # SPDX-License-Identifier: Apache-2.0
5 This is a representation of the Wi-Fi transmit power ceilings
8 for different data rates and sub-bands to get the best performance.
10 low sub-band: Channels 36-64
11 mid sub-band: Channels 96-132
12 high sub-band: Channels 136-177
17 wifi-max-tx-pwr-5g-low-mcs0:
20 description: Maximum transmit power allowed in 5GHz band MCS0 low sub-band
21 wifi-max-tx-pwr-5g-low-mcs7:
24 description: Maximum transmit power allowed in 5GHz band MCS7 low sub-band
[all …]
Dwifi-tx-power-2g.yaml2 # SPDX-License-Identifier: Apache-2.0
5 This is a representation of the Wi-Fi transmit power ceilings
8 for different data rates and sub-bands to get the best performance.
12 wifi-max-tx-pwr-2g-dsss:
16 wifi-max-tx-pwr-2g-mcs0:
20 wifi-max-tx-pwr-2g-mcs7:
/Zephyr-latest/boards/seco/stm32f3_seco_d23/
Dstm32f3_seco_d23.dts4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
9 #include <st/f3/stm32f302v(b-c)tx-pinctrl.dtsi>
12 model = "SECO SBC-3.5-PX30 board (STM32F302VCT6)";
13 compatible = "seco,stm32f3-d23";
17 zephyr,code-partition = &slot0_partition;
18 zephyr,shell-uart = &usart1;
25 compatible = "gpio-leds";
28 label = "LED-1";
32 label = "LED-2";
[all …]
/Zephyr-latest/boards/atmel/sam0/samr21_xpro/
Dsamr21_xpro.dts3 * Copyright (c) 2019-2024 Gerson Fernando Budke <nandojve@gmail.com>
5 * SPDX-License-Identifier: Apache-2.0
8 /dts-v1/;
11 #include "samr21_xpro-pinctrl.dtsi"
12 #include <zephyr/dt-bindings/input/input-event-codes.h>
20 zephyr,shell-uart = &sercom0;
29 pwm-led0 = &pwm_led0;
31 i2c-0 = &sercom1;
35 compatible = "gpio-leds";
43 compatible = "pwm-leds";
[all …]
/Zephyr-latest/boards/tdk/robokit1/
Drobokit1-common.dtsi4 * SPDX-License-Identifier: Apache-2.0
7 #include "robokit1-pinctrl.dtsi"
14 die-temp0 = &icm42688;
15 ambient-temp0 = &temp_sensor;
20 zephyr,shell-uart = &uart2;
23 zephyr,code-partition = &slot0_partition;
27 compatible = "gpio-leds";
48 io-channels = <&spi_adc 0>;
49 pullup-uv = <3300000>;
50 pullup-ohm = <0>;
[all …]
/Zephyr-latest/boards/nxp/mimxrt1170_evk/
Dmimxrt1170_evk_mimxrt1176_cm7.dts2 * Copyright 2021-2022,2024 NXP
4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
13 model = "NXP MIMXRT1170-EVK board";
17 mipi-dsi = &mipi_dsi;
26 zephyr,shell-uart = &lpuart1;
28 zephyr,flash-controller = &is25wp128;
30 zephyr,code-partition = &slot0_partition;
31 zephyr,uart-mcumgr = &lpuart1;
32 zephyr,cpu1-region = &ocram;
[all …]
/Zephyr-latest/drivers/ieee802154/
Dieee802154_rf2xx.c1 /* ieee802154_rf2xx.c - ATMEL RF2XX IEEE 802.15.4 Driver */
6 * Copyright (c) 2019-2020 Gerson Fernando Budke
8 * SPDX-License-Identifier: Apache-2.0
67 .rssi = -40,
84 k_sem_give(&ctx->trx_isr_lock); in trx_isr_handler()
111 * Datasheet: Figure 7-13. Timing Example of an RX_AACK Transaction in rf2xx_trx_set_tx_state()
141 struct rf2xx_context *ctx = dev->data; in rf2xx_set_rssi_base()
144 if (ctx->cc_page == IEEE802154_ATTR_PHY_CHANNEL_PAGE_ZERO_OQPSK_2450_BPSK_868_915) { in rf2xx_set_rssi_base()
148 } else if (ctx->cc_page == IEEE802154_ATTR_PHY_CHANNEL_PAGE_TWO_OQPSK_868_915) { in rf2xx_set_rssi_base()
156 ctx->trx_rssi_base = base; in rf2xx_set_rssi_base()
[all …]
Dieee802154_mcr20a.c1 /* ieee802154_mcr20a.c - NXP MCR20A driver */
8 * SPDX-License-Identifier: Apache-2.0
41 * max. TX duration = (PR + SFD + FLI + PDU + FCS)
111 /* RF TX power max/min values (dBm) */
113 #define MCR20A_OUTPUT_POWER_MIN (-35)
132 * Fc = 2405 + 5(k - 11) , k = 11,12,...,26
157 const struct mcr20a_config *config = dev->config; in z_mcr20a_read_reg()
169 const struct spi_buf_set tx = { in z_mcr20a_read_reg() local
178 if (spi_transceive_dt(&config->bus, &tx, &rx) == 0) { in z_mcr20a_read_reg()
179 return cmd_buf[len - 1]; in z_mcr20a_read_reg()
[all …]
/Zephyr-latest/boards/sparkfun/thing_plus/
Dsparkfun_thing_plus_nrf9160_common.dtsi2 * Copyright (c) 2018-2020 Nordic Semiconductor ASA
5 * SPDX-License-Identifier: Apache-2.0
7 #include "sparkfun_thing_plus_nrf9160_common-pinctrl.dtsi"
8 #include <zephyr/dt-bindings/input/input-event-codes.h>
12 compatible = "sparkfun,thing-plus-nrf9160";
16 zephyr,shell-uart = &uart0;
17 zephyr,uart-mcumgr = &uart0;
21 compatible = "gpio-leds";
29 compatible = "pwm-leds";
36 compatible = "gpio-keys";
[all …]
/Zephyr-latest/boards/nxp/mimxrt1060_evk/
Dmimxrt1060_evk.dtsi4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mimxrt1060_evk-pinctrl.dtsi"
11 #include <zephyr/dt-bindings/input/input-event-codes.h>
14 model = "NXP MIMXRT1060-EVK board";
19 pwm-led0 = &green_pwm_led;
23 mcuboot-button0 = &user_button;
30 zephyr,uart-mcumgr = &lpuart1;
32 zephyr,shell-uart = &lpuart1;
37 /* Micron MT48LC16M16A2B4-6AIT:G */
[all …]
/Zephyr-latest/boards/nxp/mimxrt1064_evk/
Dmimxrt1064_evk.dts4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mimxrt1064_evk-pinctrl.dtsi"
11 #include <zephyr/dt-bindings/input/input-event-codes.h>
14 model = "NXP MIMXRT1064-EVK board";
19 pwm-led0 = &green_pwm_led;
23 mcuboot-button0 = &user_button;
27 zephyr,flash-controller = &is25wp064;
29 zephyr,code-partition = &slot0_partition;
30 zephyr,uart-mcumgr = &lpuart1;
[all …]
/Zephyr-latest/boards/nxp/mimxrt1020_evk/
Dmimxrt1020_evk.dts4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mimxrt1020_evk-pinctrl.dtsi"
11 #include <zephyr/dt-bindings/input/input-event-codes.h>
14 model = "NXP MIMXRT1020-EVK board";
21 mcuboot-button0 = &user_button;
25 zephyr,flash-controller = &is25lp064;
27 zephyr,code-partition = &slot0_partition;
28 zephyr,uart-mcumgr = &lpuart1;
33 zephyr,shell-uart = &lpuart1;
[all …]
/Zephyr-latest/boards/nxp/mimxrt1024_evk/
Dmimxrt1024_evk.dts4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mimxrt1024_evk-pinctrl.dtsi"
11 #include <zephyr/dt-bindings/input/input-event-codes.h>
14 model = "NXP MIMXRT1024-EVK board";
24 mcuboot-button0 = &user_button;
28 zephyr,flash-controller = &w25q32jvwj0;
30 zephyr,code-partition = &slot0_partition;
31 zephyr,uart-mcumgr = &lpuart1;
36 zephyr,shell-uart = &lpuart1;
[all …]
/Zephyr-latest/boards/nxp/mimxrt685_evk/
Dmimxrt685_evk_mimxrt685s_cm33.dts2 * Copyright 2020-2024 NXP
4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include <zephyr/dt-bindings/pwm/pwm.h>
11 #include <zephyr/dt-bindings/input/input-event-codes.h>
13 #include "mimxrt685_evk-pinctrl.dtsi"
16 model = "NXP MIMXRT685-EVK board";
25 usart-0 = &flexcomm0;
27 pwm-0 = &sc_timer;
28 pwm-led0 = &green_pwm_led;
[all …]
/Zephyr-latest/boards/nxp/mimxrt595_evk/
Dmimxrt595_evk_mimxrt595s_cm33.dts2 * Copyright 2022-2023, NXP
4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include <zephyr/dt-bindings/input/input-event-codes.h>
12 #include "mimxrt595_evk_mimxrt595s_cm33-pinctrl.dtsi"
16 model = "NXP MIMXRT595-EVK board";
25 usart-0 = &flexcomm0;
30 pwm-0 = &sc_timer;
31 dmic-dev = &dmic0;
32 mcuboot-button0 = &user_button_1;
[all …]
/Zephyr-latest/drivers/usb/device/
Dusb_dc_stm32.c3 * Copyright (c) 2017, I-SENSE group of ICCS
5 * SPDX-License-Identifier: Apache-2.0
41 * pin(s) in the device tree. E.g: pinctrl-0 = <&usb_otg_fs_vbus_pa9 ...>;
130 /* We need n TX IN FIFOs */
133 /* We need a minimum size for RX FIFO - exact number seemingly determined through trial and error */
136 /* Allocate FIFO memory evenly between the TX FIFOs */
137 /* except the first TX endpoint need only 64 bytes */
139 #define TX_FIFO_WORDS (USB_RAM_SIZE / 4 - RX_FIFO_EP_WORDS - TX_FIFO_EP_0_WORDS)
140 /* Number of words for each remaining TX endpoint FIFO */
141 #define TX_FIFO_EP_WORDS (TX_FIFO_WORDS / (TX_FIFO_NUM - 1))
[all …]
/Zephyr-latest/drivers/usb/udc/
Dudc_stm32.c4 * SPDX-License-Identifier: Apache-2.0
78 const struct device *dev = priv->dev; in HAL_PCD_ResetCallback()
79 const struct udc_stm32_config *cfg = dev->config; in HAL_PCD_ResetCallback()
82 /* Re-Enable control endpoints */ in HAL_PCD_ResetCallback()
84 if (ep && ep->stat.enabled) { in HAL_PCD_ResetCallback()
85 HAL_PCD_EP_Open(&priv->pcd, USB_CONTROL_EP_OUT, cfg->ep0_mps, in HAL_PCD_ResetCallback()
90 if (ep && ep->stat.enabled) { in HAL_PCD_ResetCallback()
91 HAL_PCD_EP_Open(&priv->pcd, USB_CONTROL_EP_IN, cfg->ep0_mps, in HAL_PCD_ResetCallback()
95 udc_submit_event(priv->dev, UDC_EVT_RESET, 0); in HAL_PCD_ResetCallback()
102 udc_submit_event(priv->dev, UDC_EVT_VBUS_READY, 0); in HAL_PCD_ConnectCallback()
[all …]
/Zephyr-latest/tests/bsim/bluetooth/ll/cis/src/
Dmain.c1 /* main.c - Application main entry point */
6 * SPDX-License-Identifier: Apache-2.0
68 MAX(BT_GAP_US_TO_CONN_TIMEOUT(CONN_INTERVAL_MAX_US * 6U), BT_GAP_MS_TO_CONN_TIMEOUT(100U))
103 switch (data->type) { in data_cb()
106 memcpy(name, data->data, MIN(data->data_len, NAME_LEN - 1)); in data_cb()
134 bt_addr_le_to_str(info->addr, le_addr, sizeof(le_addr)); in scan_recv()
135 printk("[DEVICE]: %s, AD evt type %u, Tx Pwr: %i, RSSI %i %s " in scan_recv()
138 le_addr, info->adv_type, info->tx_power, info->rssi, name, in scan_recv()
139 (info->adv_props & BT_GAP_ADV_PROP_CONNECTABLE) != 0, in scan_recv()
140 (info->adv_props & BT_GAP_ADV_PROP_SCANNABLE) != 0, in scan_recv()
[all …]
/Zephyr-latest/tests/bsim/bluetooth/ll/bis/src/
Dtest_bis.c4 * SPDX-License-Identifier: Apache-2.0
105 sdu_buffer->dbuf = test_rx_buffer; in test_sink_sdu_alloc()
106 sdu_buffer->size = sizeof(test_rx_buffer); in test_sink_sdu_alloc()
117 sdu_frag->sdu_frag_size, sdu->total_sdu_size, sdu_frag->sdu.sn, in test_sink_sdu_emit()
118 sdu_frag->sdu.timestamp); in test_sink_sdu_emit()
185 iso_data_len = MAX(sizeof(seq_num), ((seq_num % CONFIG_BT_ISO_TX_MTU) + 1)); in iso_send()
322 big_create_param.packing = 0; /* 0 - sequential; 1 - interleaved */ in create_big()
323 big_create_param.framing = 0; /* 0 - unframed; 1 - framed */ in create_big()
327 bis_iso_qos.tx = &iso_tx_qos; in create_big()
374 big_create_param.packing = 0; /* 0 - sequential; 1 - interleaved */ in create_advanced_big()
[all …]

12