Searched full:pd0 (Results 1 – 25 of 31) sorted by relevance
12
10 /* Unplug jumpers from P3 and P2 and bridge PD0/PD1 */11 out-gpios = <&gpiod 0 0>; /* P3 pin 2 (PD0) */
10 /* Unplug jumpers from JP13 and JP4 and bridge PD0/PD1 */11 out-gpios = <&gpiod 0 0>; /* JP13 pin 2 (PD0) */
103 - CAN1_RX : PD0149 transceiver must be connected to ``PD0`` (``CAN1_RX``) and ``PD1``
100 - FDCAN1 RX/TX : PD0, PD1126 connected to pins PD0 (RX) and PD1 (TX).
110 - CAN1_RX : PD0
130 - SPI_2_NSS : PD0
137 connected to both CN29 and CN30. PD0 is connected to EC_CAN_STBY.
68 - I2C6 SCL/SDA : PD1/PD0
124 - CAN1_RX : PD0
78 - RX: PD0 (CN9 pin 25)
110 - UCPD2 : PD0/PD2
105 - CAN/CANFD : PD0, PD1
118 - CAN1_RX : PD0
106 - CAN/CANFD : PD0, PD1
104 - D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
109 - D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
79 - FDCAN1_RX : PD0
235 FMC_D2 PD0
83 - FDCAN1_RX : PD0
124 - D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
156 - CAN/CANFD_RX: PD0
177 - USART_4 TX/RX : PD1/PD0 (VCP)
176 - USER_PB1 : PD0
155 - CAN/CANFD TX/RX: PD1/PD0
190 - CAN/CANFD_RX: PD0
