| /Linux-v4.19/drivers/rtc/ |
| D | rtc-imxdi.c | 64 #define DSR 0x14 /* Status Reg */ macro
284 di_write_busy_wait(imxdi, DSR_CAF, DSR); in di_handle_valid_state()
334 di_write_busy_wait(imxdi, DSR_NVF, DSR); in di_handle_invalid_state()
336 di_write_busy_wait(imxdi, DSR_TCO, DSR); in di_handle_invalid_state()
343 return di_handle_valid_state(imxdi, __raw_readl(imxdi->ioaddr + DSR)); in di_handle_invalid_state()
386 DSR_MCO | DSR_TCO), DSR); in di_handle_invalid_and_failure_state()
388 dsr = readl(imxdi->ioaddr + DSR); in di_handle_invalid_and_failure_state()
400 di_write_busy_wait(imxdi, DSR_SVF, DSR); in di_handle_invalid_and_failure_state()
403 dsr = readl(imxdi->ioaddr + DSR); in di_handle_invalid_and_failure_state()
424 dsr = readl(imxdi->ioaddr + DSR); in di_handle_state()
[all …]
|
| /Linux-v4.19/drivers/net/wan/ |
| D | hd64570.h | 130 #define DSR 0x10 /* DMA Status */ macro
131 #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
132 #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
|
| /Linux-v4.19/arch/arm/boot/dts/ |
| D | am335x-baltos-ir3220.dts | 37 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
50 AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
|
| D | am335x-baltos-ir5221.dts | 45 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
58 AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
|
| D | am335x-baltos-ir2110.dts | 31 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
|
| D | imx6ull-colibri.dtsi | 421 MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */
|
| D | gemini-dlink-dir-685.dts | 115 /* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
|
| D | imx7-colibri.dtsi | 706 MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
|
| /Linux-v4.19/drivers/staging/octeon-usb/ |
| D | TODO | 2 D-Link DSR-1000N and EBH5600 evaluation board with USB mass storage.
|
| /Linux-v4.19/arch/mips/boot/dts/cavium-octeon/ |
| D | dlink_dsr-500n.dts | 2 * Device tree source for D-Link DSR-500N.
|
| D | dlink_dsr-500n-1000n.dtsi | 2 * Device tree source for D-Link DSR-500N/1000N (common parts).
|
| D | dlink_dsr-1000n.dts | 2 * Device tree source for D-Link DSR-1000N.
|
| /Linux-v4.19/Documentation/devicetree/bindings/soc/fsl/cpm_qe/ |
| D | serial.txt | 14 CTS, RTS, DCD, DSR, DTR, and RI.
|
| /Linux-v4.19/Documentation/usb/ |
| D | iuu_phoenix.txt | 38 …parm: cdmode:Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING,…
|
| D | usb-serial.txt | 307 ** Queries of inputs (CTS,DSR,CD,RI) show the last
414 implemented. Support for finding out about DSR and CTS line status is
|
| /Linux-v4.19/Documentation/devicetree/bindings/serial/ |
| D | cirrus,clps711x-uart.txt | 11 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
|
| D | fsl-mxs-auart.txt | 25 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
|
| D | serial.txt | 13 used as the UART's DSR line.
|
| D | atmel-usart.txt | 17 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
|
| /Linux-v4.19/Documentation/arm/SA1100/ |
| D | Assabet | 251 Radio: TX, RX, CTS, DSR, DCD, RI
253 COM: TX, RX, CTS, DSR, DCD, RTS, DTR, PM
291 COM1,2: TX, RX, CTS, DSR, DCD, RTS, DTR
|
| /Linux-v4.19/drivers/tty/ |
| D | synclinkmp.c | 374 #define DSR 0x90 macro
2210 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ in isr_txeom()
2327 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; in isr_rxdmaok()
2330 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); in isr_rxdmaok()
2344 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; in isr_rxdmaerror()
2347 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); in isr_rxdmaerror()
2362 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ in isr_txdmaok()
2380 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; in isr_txdmaerror()
2383 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); in isr_txdmaerror()
2967 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ in tx_abort()
[all …]
|
| D | nozomi.c | 245 unsigned int DSR:1; member
300 unsigned int DSR:1; member
961 if (old_ctrl.DSR != ctrl_dl.DSR) in receive_flow_control()
1693 | (ctrl_dl->DSR ? TIOCM_DSR : 0) in ntty_tiocmget()
|
| /Linux-v4.19/drivers/dma/dw/ |
| D | regs.h | 55 DW_REG(DSR);
|
| /Linux-v4.19/Documentation/serial/ |
| D | driver | 104 - TIOCM_DSR state of DSR signal
107 the port does not support CTS, DCD or DSR, the driver should
|
| /Linux-v4.19/Documentation/devicetree/bindings/mmc/ |
| D | mmc.txt | 53 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
|
