1/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/*
10 * VScom OnRISC
11 * http://www.vscom.de
12 */
13
14/dts-v1/;
15
16#include "am335x-baltos.dtsi"
17#include "am335x-baltos-leds.dtsi"
18
19/ {
20	model = "OnRISC Baltos iR 2110";
21};
22
23&am33xx_pinmux {
24	uart1_pins: pinmux_uart1_pins {
25		pinctrl-single,pins = <
26			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
27			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
28			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
29			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
30			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
31			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
32			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
33			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
34		>;
35	};
36};
37
38&uart1 {
39	pinctrl-names = "default";
40	pinctrl-0 = <&uart1_pins>;
41	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
42	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
43	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
44	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
45
46	status = "okay";
47};
48
49&usb0_phy {
50	status = "okay";
51};
52
53&usb0 {
54	status = "okay";
55	dr_mode = "host";
56};
57
58&davinci_mdio {
59	phy0: ethernet-phy@0 {
60		reg = <1>;
61	};
62};
63
64&cpsw_emac0 {
65	phy-mode = "rmii";
66	dual_emac_res_vlan = <1>;
67	phy-handle = <&phy0>;
68};
69
70&cpsw_emac1 {
71	phy-mode = "rgmii-txid";
72	dual_emac_res_vlan = <2>;
73	phy-handle = <&phy1>;
74};
75
76&phy_sel {
77	rmii-clock-ext = <1>;
78};
79