1/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/*
10 * VScom OnRISC
11 * http://www.vscom.de
12 */
13
14/dts-v1/;
15
16#include "am335x-baltos.dtsi"
17#include "am335x-baltos-leds.dtsi"
18
19/ {
20	model = "OnRISC Baltos iR 3220";
21};
22
23&am33xx_pinmux {
24	tca6416_pins: pinmux_tca6416_pins {
25		pinctrl-single,pins = <
26			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
27		>;
28	};
29
30	uart1_pins: pinmux_uart1_pins {
31		pinctrl-single,pins = <
32			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
33			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
34			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
35			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
36			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
37			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
38			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
39			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
40		>;
41	};
42
43	uart2_pins: pinmux_uart2_pins {
44		pinctrl-single,pins = <
45			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
46			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
47			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
48			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
49			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
50			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
51			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
52			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
53
54			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
55		>;
56	};
57};
58
59&uart1 {
60	pinctrl-names = "default";
61	pinctrl-0 = <&uart1_pins>;
62	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
63	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
64	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
65	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
66
67	status = "okay";
68};
69
70&uart2 {
71	pinctrl-names = "default";
72	pinctrl-0 = <&uart2_pins>;
73	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
74	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
75	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
76	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
77
78	status = "okay";
79};
80
81&i2c1 {
82	tca6416: gpio@20 {
83		compatible = "ti,tca6416";
84		reg = <0x20>;
85		gpio-controller;
86		#gpio-cells = <2>;
87		interrupt-parent = <&gpio0>;
88		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
89		pinctrl-names = "default";
90		pinctrl-0 = <&tca6416_pins>;
91	};
92};
93
94&usb0_phy {
95	status = "okay";
96};
97
98&usb0 {
99	status = "okay";
100	dr_mode = "host";
101};
102
103&cpsw_emac0 {
104	phy-mode = "rmii";
105	dual_emac_res_vlan = <1>;
106	fixed-link {
107		speed = <100>;
108		full-duplex;
109	};
110};
111
112&cpsw_emac1 {
113	phy-mode = "rgmii-txid";
114	dual_emac_res_vlan = <2>;
115	phy-handle = <&phy1>;
116};
117
118&phy_sel {
119	rmii-clock-ext = <1>;
120};
121