/Linux-v6.1/Documentation/devicetree/bindings/ata/ |
D | brcm,sata-brcm.yaml | 72 reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; 74 interrupts = <0 30 0>; 76 #size-cells = <0>; 78 sata0: sata-port@0 { 79 reg = <0>; 80 phys = <&sata_phy 0>;
|
/Linux-v6.1/arch/arm/boot/dts/ |
D | bcm7445.dtsi | 17 #size-cells = <0>; 19 cpu@0 { 23 reg = <0>; 50 reg = <0x00 0xffd01000 0x00 0x1000>, 51 <0x00 0xffd02000 0x00 0x2000>, 52 <0x00 0xffd04000 0x00 0x2000>, 53 <0x00 0xffd06000 0x00 0x2000>; 70 ranges = <0 0x00 0xf0000000 0x1000000>; 74 reg = <0x40ab00 0x20>; 84 reg = <0x404000 0x51c>; [all …]
|
D | am437x-gp-evm.dts | 57 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 58 brightness-levels = <0 51 53 56 62 75 101 152 255>; 68 pinctrl-0 = <&matrix_keypad_default>; 80 linux,keymap = <0x00000201 /* P1 */ 81 0x00010202 /* P2 */ 82 0x01000067 /* UP */ 83 0x0101006a /* RIGHT */ 84 0x02000069 /* LEFT */ 85 0x0201006c>; /* DOWN */ 103 #clock-cells = <0>; [all …]
|
/Linux-v6.1/arch/mips/boot/dts/brcm/ |
D | bcm7360.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 25 #address-cells = <0>; 35 #clock-cells = <0>; 41 #clock-cells = <0>; 51 ranges = <0 0x10000000 0x01000000>; 55 reg = <0x411400 0x30>; 66 reg = <0x403000 0x30>; 75 reg = <0x400000 0xdc>; [all …]
|
D | bcm7362.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 31 #address-cells = <0>; 41 #clock-cells = <0>; 47 #clock-cells = <0>; 57 ranges = <0 0x10000000 0x01000000>; 61 reg = <0x411400 0x30>, <0x411600 0x30>; 72 reg = <0x403000 0x30>; 81 reg = <0x400000 0xdc>; [all …]
|
D | bcm7346.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 31 #address-cells = <0>; 41 #clock-cells = <0>; 47 #clock-cells = <0>; 57 ranges = <0 0x10000000 0x01000000>; 61 reg = <0x411400 0x30>, <0x411600 0x30>; 72 reg = <0x403000 0x30>; 81 reg = <0x400000 0xdc>; [all …]
|
D | bcm7435.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 43 #address-cells = <0>; 53 #clock-cells = <0>; 59 #clock-cells = <0>; 69 ranges = <0 0x10000000 0x01000000>; 73 reg = <0x41b500 0x40>, <0x41b600 0x40>, 74 <0x41b700 0x40>, <0x41b800 0x40>; 85 reg = <0x403000 0x30>; [all …]
|
D | bcm7425.dtsi | 9 #size-cells = <0>; 13 cpu@0 { 16 reg = <0>; 31 #address-cells = <0>; 41 #clock-cells = <0>; 47 #clock-cells = <0>; 57 ranges = <0 0x10000000 0x01000000>; 61 reg = <0x41a400 0x30>, <0x41a600 0x30>; 72 reg = <0x403000 0x30>; 81 reg = <0x400000 0xdc>; [all …]
|
/Linux-v6.1/drivers/clk/sunxi-ng/ |
D | ccu-sun50i-a100.c | 31 #define SUN50I_A100_PLL_PERIPH1_PATTERN0 0xd1303333 41 * testing", so it's not modelled and then force to 0. 43 #define SUN50I_A100_PLL_CPUX_REG 0x000 49 .reg = 0x000, 57 #define SUN50I_A100_PLL_DDR0_REG 0x010 63 .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ 65 .reg = 0x010, 73 #define SUN50I_A100_PLL_PERIPH0_REG 0x020 79 .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ 82 .reg = 0x020, [all …]
|
D | ccu-sun50i-h616.c | 35 * testing", so it's not modelled and then force to 0. 37 #define SUN50I_H616_PLL_CPUX_REG 0x000 43 .reg = 0x000, 51 #define SUN50I_H616_PLL_DDR0_REG 0x010 57 .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ 59 .reg = 0x010, 66 #define SUN50I_H616_PLL_DDR1_REG 0x018 72 .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ 74 .reg = 0x018, 81 #define SUN50I_H616_PLL_PERIPH0_REG 0x020 [all …]
|
D | ccu-sun20i-d1.c | 34 * in the user manual. So it's not modelled and forced to 0. 36 #define SUN20I_D1_PLL_CPUX_REG 0x000 42 .reg = 0x000, 50 #define SUN20I_D1_PLL_DDR0_REG 0x010 56 .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ 58 .reg = 0x010, 65 #define SUN20I_D1_PLL_PERIPH0_REG 0x020 72 .reg = 0x020, 83 pll_periph0_4x_hws, 0x020, 16, 3, 0); 85 pll_periph0_4x_hws, 0x020, 20, 3, 0); [all …]
|
/Linux-v6.1/drivers/memory/tegra/ |
D | tegra210.c | 12 .id = 0x00, 16 .id = 0x01, 21 .reg = 0x228, 25 .reg = 0x2e8, 26 .shift = 0, 27 .mask = 0xff, 28 .def = 0x1e, 32 .id = 0x02, 37 .reg = 0x228, 41 .reg = 0x2f4, [all …]
|
D | tegra124.c | 16 .id = 0x00, 21 .reg = 0x34c, 22 .shift = 0, 23 .mask = 0xff, 24 .def = 0x0, 28 .id = 0x01, 33 .reg = 0x228, 37 .reg = 0x2e8, 38 .shift = 0, 39 .mask = 0xff, [all …]
|
/Linux-v6.1/drivers/gpu/drm/amd/include/asic_reg/gmc/ |
D | gmc_7_1_d.h | 27 #define mmMC_CONFIG 0x800 28 #define mmMC_ARB_AGE_CNTL 0x9bf 29 #define mmMC_ARB_RET_CREDITS2 0x9c0 30 #define mmMC_ARB_FED_CNTL 0x9c1 31 #define mmMC_ARB_GECC2_STATUS 0x9c2 32 #define mmMC_ARB_GECC2_MISC 0x9c3 33 #define mmMC_ARB_GECC2_DEBUG 0x9c4 34 #define mmMC_ARB_GECC2_DEBUG2 0x9c5 35 #define mmMC_ARB_PERF_CID 0x9c6 36 #define mmMC_ARB_GECC2 0x9c9 [all …]
|
D | gmc_8_1_d.h | 27 #define mmMC_CONFIG 0x800 28 #define mmMC_ARB_ATOMIC 0x9be 29 #define mmMC_ARB_AGE_CNTL 0x9bf 30 #define mmMC_ARB_RET_CREDITS2 0x9c0 31 #define mmMC_ARB_FED_CNTL 0x9c1 32 #define mmMC_ARB_GECC2_STATUS 0x9c2 33 #define mmMC_ARB_GECC2_MISC 0x9c3 34 #define mmMC_ARB_GECC2_DEBUG 0x9c4 35 #define mmMC_ARB_GECC2_DEBUG2 0x9c5 36 #define mmMC_ARB_PERF_CID 0x9c6 [all …]
|
/Linux-v6.1/drivers/net/wireless/realtek/rtw88/ |
D | rtw8723d_table.c | 10 0x020, 0x00000013, 11 0x02F, 0x00000010, 12 0x077, 0x00000007, 13 0x421, 0x0000000F, 14 0x428, 0x0000000A, 15 0x429, 0x00000010, 16 0x430, 0x00000000, 17 0x431, 0x00000000, 18 0x432, 0x00000000, 19 0x433, 0x00000001, [all …]
|
D | rtw8821c_table.c | 10 0x010, 0x00000043, 11 0x025, 0x0000001D, 12 0x026, 0x000000CE, 13 0x04F, 0x00000001, 14 0x029, 0x000000F9, 15 0x420, 0x00000080, 16 0x421, 0x0000001F, 17 0x428, 0x0000000A, 18 0x429, 0x00000010, 19 0x430, 0x00000000, [all …]
|
D | rtw8822b_table.c | 10 0x029, 0x000000F9, 11 0x420, 0x00000080, 12 0x421, 0x0000001F, 13 0x428, 0x0000000A, 14 0x429, 0x00000010, 15 0x430, 0x00000000, 16 0x431, 0x00000000, 17 0x432, 0x00000000, 18 0x433, 0x00000001, 19 0x434, 0x00000004, [all …]
|
D | rtw8822c_table.c | 16 0x83000000, 0x00000000, 0x40000000, 0x00000000, 17 0x1D90, 0x300001FF, 18 0x1D90, 0x300101FE, 19 0x1D90, 0x300201FD, 20 0x1D90, 0x300301FC, 21 0x1D90, 0x300401FB, 22 0x1D90, 0x300501FA, 23 0x1D90, 0x300601F9, 24 0x1D90, 0x300701F8, 25 0x1D90, 0x300801F7, [all …]
|
/Linux-v6.1/drivers/pinctrl/tegra/ |
D | pinctrl-tegra210.c | 22 #define TEGRA_PIN_PEX_L0_RST_N_PA0 _GPIO(0) 182 #define TEGRA_PIN_CORE_PWR_REQ _PIN(0) 1269 #define DRV_PINGROUP_REG_A 0x8d4 /* bank 0 */ 1270 #define PINGROUP_REG_A 0x3000 /* bank 1 */ 1293 .mux_bit = 0, \ 1309 .drv_bank = 0, \ 1338 .drv_bank = 0, \ 1357 …PINGROUP(sdmmc1_clk_pm0, SDMMC1, RSVD1, RSVD2, RSVD3, 0x3000, Y, Y, N, N,… 1358 …PINGROUP(sdmmc1_cmd_pm1, SDMMC1, SPI3, RSVD2, RSVD3, 0x3004, Y, Y, N, N,… 1359 …PINGROUP(sdmmc1_dat3_pm2, SDMMC1, SPI3, RSVD2, RSVD3, 0x3008, Y, Y, N, N,… [all …]
|
/Linux-v6.1/drivers/gpu/drm/amd/amdgpu/ |
D | sid.h | 29 #define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003 30 #define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002 31 #define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001 39 #define SI_MAX_BACKENDS_MASK 0xFF 40 #define SI_MAX_BACKENDS_PER_SE_MASK 0x0F 42 #define SI_MAX_SIMDS_MASK 0x0FFF 43 #define SI_MAX_SIMDS_PER_SE_MASK 0x00FF 45 #define SI_MAX_PIPES_MASK 0xFF 46 #define SI_MAX_PIPES_PER_SIMD_MASK 0x3F 47 #define SI_MAX_LDS_NUM 0xFFFF [all …]
|
/Linux-v6.1/drivers/mmc/host/ |
D | sdhci-msm.c | 25 #define CORE_MCI_VERSION 0x50 27 #define CORE_VERSION_MAJOR_MASK (0xf << CORE_VERSION_MAJOR_SHIFT) 28 #define CORE_VERSION_MINOR_MASK 0xff 30 #define CORE_MCI_GENERICS 0x70 33 #define HC_MODE_EN 0x1 34 #define CORE_POWER 0x0 38 #define CORE_PWRCTL_BUS_OFF BIT(0) 42 #define CORE_PWRCTL_BUS_SUCCESS BIT(0) 46 #define REQ_BUS_OFF BIT(0) 50 #define INT_MASK 0xf [all …]
|