1.. zephyr:board:: slwrb4255a 2 3Overview 4******** 5 6The EFR32FG13P Flex Gecko 2.4 GHz and 915 MHz Radio Board is delivered as a 7`standalone Proprietary Wireless radio board`_. It contains a EFR32FG13P Wireless 8SoC built on an ARM Cortex®-M4F processor with excellent low power capabilities. 9 10The BRD4255A a.k.a. SLWRB4255A radio board plugs into the Wireless Starter Kit 11Mainboard BRD4001A and is supported as one of :ref:`silabs_radio_boards`. 12 13Hardware 14******** 15 16- EFR32FG13P233F512GM48 Flex Gecko SoC 17- CPU core: ARM Cortex®-M4 with FPU 18- Flash memory: 512 kB 19- RAM: 64 kB 20- Transmit power: up to 19 dBm 21- Operation frequency: 2.4 GHz, 915 MHz 22- Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz). 23 24For more information about the EFR32FG13 SoC and BRD4255A board, refer to these 25documents: 26 27- `EFR32FG13 Website`_ 28- `EFR32FG13 Datasheet`_ 29- `EFR32xG13 Reference Manual`_ 30- `BRD4255A Reference Manual`_ 31 32Supported Features 33================== 34 35The board configuration supports the following hardware features: 36 37+-----------+------------+-------------------------------------+ 38| Interface | Controller | Driver/Component | 39+===========+============+=====================================+ 40| MPU | on-chip | memory protection unit | 41+-----------+------------+-------------------------------------+ 42| NVIC | on-chip | nested vector interrupt controller | 43+-----------+------------+-------------------------------------+ 44| SYSTICK | on-chip | systick | 45+-----------+------------+-------------------------------------+ 46| COUNTER | on-chip | rtcc | 47+-----------+------------+-------------------------------------+ 48| FLASH | on-chip | flash memory | 49+-----------+------------+-------------------------------------+ 50| GPIO | on-chip | gpio | 51+-----------+------------+-------------------------------------+ 52| UART | on-chip | serial port-polling; | 53| | | serial port-interrupt | 54+-----------+------------+-------------------------------------+ 55| SPI(M) | on-chip | spi port-polling | 56+-----------+------------+-------------------------------------+ 57| WATCHDOG | on-chip | watchdog | 58+-----------+------------+-------------------------------------+ 59 60The default configuration can be found in 61:zephyr_file:`boards/silabs/radio_boards/slwrb4255a/slwrb4255a_defconfig` 62 63Connections and IOs 64=================== 65 66In the following table, the column **Pin** contains Pin names. For example, PA2 67means Pin number 2 on PORTA, as used in the board's datasheets and manuals. 68 69+-------+-------------+-------------------------------------+ 70| Pin | Function | Usage | 71+=======+=============+=====================================+ 72| PF4 | GPIO | LED0 | 73+-------+-------------+-------------------------------------+ 74| PF5 | GPIO | LED1 | 75+-------+-------------+-------------------------------------+ 76| PF6 | GPIO | Push Button PB0 | 77+-------+-------------+-------------------------------------+ 78| PF7 | GPIO | Push Button PB1 | 79+-------+-------------+-------------------------------------+ 80| PA5 | GPIO | Board Controller Enable VCOM_ENABLE | 81+-------+-------------+-------------------------------------+ 82| PA0 | USART0_TX | UART Console VCOM_TX US0_TX #0 | 83+-------+-------------+-------------------------------------+ 84| PA1 | USART0_RX | UART Console VCOM_RX US0_RX #0 | 85+-------+-------------+-------------------------------------+ 86| PC6 | SPI_MOSI | Flash MOSI US1_TX #11 | 87+-------+-------------+-------------------------------------+ 88| PC7 | SPI_MISO | Flash MISO US1_RX #11 | 89+-------+-------------+-------------------------------------+ 90| PC8 | SPI_SCLK | Flash SCLK US1_CLK #11 | 91+-------+-------------+-------------------------------------+ 92| PA4 | SPI_CS | Flash Chip Select (GPIO) | 93+-------+-------------+-------------------------------------+ 94 95System Clock 96============ 97 98The EFR32FG13P SoC is configured to use the 38.4 MHz external oscillator on the 99board. 100 101Serial Port 102=========== 103 104The EFR32FG13P SoC has three USARTs and one Low Energy UARTs (LEUART). 105USART0 is connected to the board controller and is used for the console. 106 107Programming and Debugging 108************************* 109 110Flashing 111======== 112 113Connect the BRD4001A board with a mounted BRD4255A radio module to your host 114computer using the USB port. 115 116Here is an example for the :zephyr:code-sample:`hello_world` application. 117 118.. zephyr-app-commands:: 119 :zephyr-app: samples/hello_world 120 :board: slwrb4255a 121 :goals: flash 122 123Open a serial terminal (minicom, putty, etc.) with the following settings: 124 125- Speed: 115200 126- Data: 8 bits 127- Parity: None 128- Stop bits: 1 129 130Reset the board and you should see the following message in the terminal: 131 132.. code-block:: console 133 134 Hello World! slwrb4255a 135 136 137.. _EFR32FG13 Website: 138 https://www.silabs.com/wireless/proprietary/efr32fg13-series-1-sub-ghz-2-4-ghz-socs 139 140.. _EFR32FG13 Datasheet: 141 https://www.silabs.com/documents/public/data-sheets/efr32fg13-datasheet.pdf 142 143.. _EFR32xG13 Reference Manual: 144 https://www.silabs.com/documents/public/reference-manuals/efr32xg13-rm.pdf 145 146.. _standalone Proprietary Wireless radio board: 147 https://www.silabs.com/development-tools/wireless/proprietary/slwrb4255a-efr32fg13-915-mhz-radio-board 148 149.. _BRD4255A Reference Manual: 150 https://www.silabs.com/documents/public/reference-manuals/brd4255a-rm.pdf 151