.. zephyr:board:: slwrb4255a Overview ******** The EFR32FG13P Flex Gecko 2.4 GHz and 915 MHz Radio Board is delivered as a `standalone Proprietary Wireless radio board`_. It contains a EFR32FG13P Wireless SoC built on an ARM Cortex®-M4F processor with excellent low power capabilities. The BRD4255A a.k.a. SLWRB4255A radio board plugs into the Wireless Starter Kit Mainboard BRD4001A and is supported as one of :ref:`silabs_radio_boards`. Hardware ******** - EFR32FG13P233F512GM48 Flex Gecko SoC - CPU core: ARM Cortex®-M4 with FPU - Flash memory: 512 kB - RAM: 64 kB - Transmit power: up to 19 dBm - Operation frequency: 2.4 GHz, 915 MHz - Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz). For more information about the EFR32FG13 SoC and BRD4255A board, refer to these documents: - `EFR32FG13 Website`_ - `EFR32FG13 Datasheet`_ - `EFR32xG13 Reference Manual`_ - `BRD4255A Reference Manual`_ Supported Features ================== .. zephyr:board-supported-hw:: Connections and IOs =================== In the following table, the column **Pin** contains Pin names. For example, PA2 means Pin number 2 on PORTA, as used in the board's datasheets and manuals. +-------+-------------+-------------------------------------+ | Pin | Function | Usage | +=======+=============+=====================================+ | PF4 | GPIO | LED0 | +-------+-------------+-------------------------------------+ | PF5 | GPIO | LED1 | +-------+-------------+-------------------------------------+ | PF6 | GPIO | Push Button PB0 | +-------+-------------+-------------------------------------+ | PF7 | GPIO | Push Button PB1 | +-------+-------------+-------------------------------------+ | PA5 | GPIO | Board Controller Enable VCOM_ENABLE | +-------+-------------+-------------------------------------+ | PA0 | USART0_TX | UART Console VCOM_TX US0_TX #0 | +-------+-------------+-------------------------------------+ | PA1 | USART0_RX | UART Console VCOM_RX US0_RX #0 | +-------+-------------+-------------------------------------+ | PC6 | SPI_MOSI | Flash MOSI US1_TX #11 | +-------+-------------+-------------------------------------+ | PC7 | SPI_MISO | Flash MISO US1_RX #11 | +-------+-------------+-------------------------------------+ | PC8 | SPI_SCLK | Flash SCLK US1_CLK #11 | +-------+-------------+-------------------------------------+ | PA4 | SPI_CS | Flash Chip Select (GPIO) | +-------+-------------+-------------------------------------+ System Clock ============ The EFR32FG13P SoC is configured to use the 38.4 MHz external oscillator on the board. Serial Port =========== The EFR32FG13P SoC has three USARTs and one Low Energy UARTs (LEUART). USART0 is connected to the board controller and is used for the console. Programming and Debugging ************************* Flashing ======== Connect the BRD4001A board with a mounted BRD4255A radio module to your host computer using the USB port. Here is an example for the :zephyr:code-sample:`hello_world` application. .. zephyr-app-commands:: :zephyr-app: samples/hello_world :board: slwrb4255a :goals: flash Open a serial terminal (minicom, putty, etc.) with the following settings: - Speed: 115200 - Data: 8 bits - Parity: None - Stop bits: 1 Reset the board and you should see the following message in the terminal: .. code-block:: console Hello World! slwrb4255a .. _EFR32FG13 Website: https://www.silabs.com/wireless/proprietary/efr32fg13-series-1-sub-ghz-2-4-ghz-socs .. _EFR32FG13 Datasheet: https://www.silabs.com/documents/public/data-sheets/efr32fg13-datasheet.pdf .. _EFR32xG13 Reference Manual: https://www.silabs.com/documents/public/reference-manuals/efr32xg13-rm.pdf .. _standalone Proprietary Wireless radio board: https://www.silabs.com/development-tools/wireless/proprietary/slwrb4255a-efr32fg13-915-mhz-radio-board .. _BRD4255A Reference Manual: https://www.silabs.com/documents/public/reference-manuals/brd4255a-rm.pdf