Home
last modified time | relevance | path

Searched +full:7 +full:us (Results 1 – 25 of 239) sorted by relevance

12345678910

/Zephyr-latest/subsys/bluetooth/controller/ll_sw/nordic/lll/
Dlll_df_types.h7 /* @brief Max supported CTE length in 8us units */
9 /* @brief Min supported CTE length in 8us units */
21 /* @brief Macro to convert length of CTE to [us] */
43 uint8_t cte_length:6; /* Length of CTE in 8us units */
50 /* BT 5.1 Vol 6, Part B, Section 2.5.4 reference period is sampled with 1us
55 * If 1us sampling slots are supported maximum number of IQ samples in single CTE
56 * is 74 (sample spacing is 2us). If it is not supported maximum number of IQ
57 * samples is 37 (sample spacing is 4us).
122 uint8_t slot_durations:2; /* Bit field where: BIT(0) is 1us, BIT(1) is 2us. */
125 uint8_t ant_sw_len:7;
[all …]
/Zephyr-latest/dts/bindings/w1/
Dadi,max32-w1.yaml54 approximately 5us (micro second), 15us, and 7us, respectively.
58 and the time-slot recovery times out to approximately 8us, 22us, and 14us, respectively.
/Zephyr-latest/boards/nordic/nrf5340_audio_dk/
Dnrf5340_audio_dk_nrf5340_cpuapp_common.dtsi34 <3 &adc 5>, /* A3 = P0.7 = AIN5 */
36 <5 &adc 7>; /* A5 = P0.26 = AIN7 */
89 load-capacitance-picofarad = <7>;
162 vbus-conversion-time-us = <4156>;
163 vshunt-conversion-time-us = <4156>;
173 vbus-conversion-time-us = <4156>;
174 vshunt-conversion-time-us = <4156>;
184 vbus-conversion-time-us = <4156>;
185 vshunt-conversion-time-us = <4156>;
195 vbus-conversion-time-us = <4156>;
[all …]
/Zephyr-latest/samples/drivers/auxdisplay/boards/
Desp_wrover_kit.overlay22 enable-line-rise-delay-us = <1000>;
23 enable-line-fall-delay-us = <500>;
32 <&aux_display_gpio 7 (GPIO_ACTIVE_HIGH)>;
/Zephyr-latest/tests/subsys/logging/log_benchmark/src/
Dmain.c114 TEST_LOG_CAPACITY(7, total_cnt, 1); in ZTEST()
132 DBG_PRINT("%d arguments message logged in %u cycles (%u us). " \
150 TEST_LOG_MESSAGE_STORE_NO_OVERFLOW(7, total_cyc, total_msg); in run_log_message_store_time_no_overwrite()
155 PRINT("%sAverage logging a message: %u cycles (%u us)\n", in run_log_message_store_time_no_overwrite()
177 DBG_PRINT("%d arguments message logged in %u cycles (%u us). " \
195 TEST_LOG_MESSAGE_STORE_OVERFLOW(7, 50, total_cyc, total_msg); in ZTEST()
200 PRINT("Average overwrite logging a message: %u cycles (%u us)\n", in ZTEST()
226 uint32_t us = k_cyc_to_us_ceil32(cyc); in ZTEST() local
228 PRINT("%slogging with transient string %u cycles (%u us).", in ZTEST()
230 cyc / repeat, us / repeat); in ZTEST()
/Zephyr-latest/samples/drivers/jesd216/
DREADME.rst49 Byte program: type 32 + 1 * B us, max 192 + 6 * B us
50 Page program: typ 896 us, max 5376 us
56 e5 20 f1 ff ff ff 7f 00 44 eb 08 6b 08 3b 04 bb
/Zephyr-latest/include/zephyr/usb/
Dusb_ch9.h68 #define USB_REQTYPE_GET_DIR(bmRequestType) (((bmRequestType) >> 7) & 0x01U)
116 #define USB_DESC_OTHER_SPEED 7
252 #define USB_SCD_RESERVED BIT(7)
295 #define USB_EP_DIR_MASK (uint8_t)BIT(7)
298 #define USB_EP_DIR_IN (uint8_t)BIT(7)
345 #define USB_FS_INT_EP_INTERVAL(us) CLAMP(((us) / 1000U), 1U, 255U) argument
348 #define USB_HS_INT_EP_INTERVAL(us) CLAMP((ilog2((us) / 125U) + 1U), 1U, 16U) argument
351 #define USB_FS_ISO_EP_INTERVAL(us) CLAMP(((us) / 1000U), 1U, 16U) argument
354 #define USB_HS_ISO_EP_INTERVAL(us) CLAMP((ilog2((us) / 125U) + 1U), 1U, 16U) argument
/Zephyr-latest/samples/boards/ti/cc13x2_cc26x2/system_off/src/
Dext_flash.c36 gpio_pin_set(dev, DIO9_PIN, (byte >> (7 - i)) & 0x01); in CC1352R1_LAUNCHXL_sendExtFlashByte()
42 * 3 cycles per loop: 8 loops @ 48 Mhz = 0.5 us. in CC1352R1_LAUNCHXL_sendExtFlashByte()
51 * Keep CS high at least 40 us in CC1352R1_LAUNCHXL_sendExtFlashByte()
52 * 3 cycles per loop: 700 loops @ 48 Mhz ~= 44 us in CC1352R1_LAUNCHXL_sendExtFlashByte()
64 * least 20 ns and ten wait at least 35 us. in CC1352R1_LAUNCHXL_wakeUpExtFlash()
72 /* 3 cycles per loop: 560 loops @ 48 Mhz ~= 35 us */ in CC1352R1_LAUNCHXL_wakeUpExtFlash()
/Zephyr-latest/drivers/w1/
Dw1_zephyr_gpio.c41 #define W1_GPIO_WAIT_US(us) k_busy_wait(us) argument
45 #define W1_GPIO_WAIT_US(us) k_usleep(us) argument
66 * delays of 2.5us, 7.5us and 8.5us.
70 #define W1_GPIO_TIMING_OD_B 7u
71 #define W1_GPIO_TIMING_OD_C 7u
74 #define W1_GPIO_TIMING_OD_F 7u
/Zephyr-latest/drivers/ieee802154/
Dieee802154_rf2xx_regs.h14 #define RF2XX_AES_CORE_CYCLE_TIME 24 /* us */
15 #define RF2XX_RANDOM_NUMBER_UPDATE_INTERVAL 1 /* us */
96 #define RF2XX_CCA_DONE 7
103 #define RF2XX_TRAC_BIT_MASK 7
106 #define RF2XX_TOM_EN 7
115 #define RF2XX_PA_EXT_EN 7
124 #define RF2XX_PA_BOOST 7
131 #define RF2XX_RX_CRC_VALID 7
137 #define RF2XX_CCA_REQUEST 7
151 #define RF2XX_RX_SAFE_MODE 7
[all …]
DKconfig.b9121 int "Tx/Rx modes switching delay time (us)"
63 hex "MAC Address Byte 7"
67 This is the byte 7 of the MAC address.
/Zephyr-latest/drivers/led_strip/
Dtlc59731.c18 * between 1.67us and 50us. We want to go as fast as possible, but
19 * delays under 1us don't work very well, so we settle on 5us for the
25 * A one is represented by an additional pulse between 275ns and 2.5us
28 * full 1us. After the pulse, we wait an additional T_CYCLE_1 to complete
44 #define TLC59731_DELAY 0x01 /* us */
45 #define TLC59731_T_CYCLE_0 0x04 /* us */
46 #define TLC59731_T_CYCLE_1 0x01 /* us */
96 int8_t idx = 7; in rgb_write_data()
/Zephyr-latest/boards/st/b_g474e_dpow1/
Db_g474e_dpow1.dts34 gpios = <&gpiob 7 GPIO_ACTIVE_HIGH>;
107 div-p = <7>;
176 * tTransitionWindow = 1.687 uS * 8 = 13.5 uS
177 * tInterFrameGap = 1.687 uS * 17 = 28.68 uS
/Zephyr-latest/include/zephyr/bluetooth/
Dcs.h164 * | 7 | A2 A1 A4 A3 |
215 /** CS Test Override 7 Sounding Sequence Marker Value */
268 * Range: 1250us to 4s
296 * - 10 us
297 * - 20 us
298 * - 30 us
299 * - 40 us
300 * - 50 us
301 * - 60 us
302 * - 80 us
[all …]
/Zephyr-latest/boards/silabs/dev_kits/sltb010a/
Dthunderboard.dtsi46 startup-delay-us = <100000>;
55 startup-delay-us = <100000>;
62 startup-delay-us = <100000>;
89 e5 20 f1 ff ff ff 7f 00 44 eb 08 6b 08 3b 04 bb
/Zephyr-latest/boards/silabs/dev_kits/xg27_dk2602a/
Dthunderboard.dtsi46 startup-delay-us = <100000>;
55 startup-delay-us = <100000>;
62 startup-delay-us = <100000>;
89 e5 20 f1 ff ff ff 7f 00 44 eb 08 6b 08 3b 04 bb
/Zephyr-latest/boards/st/stm32g081b_eval/
Dstm32g081b_eval.dts62 gpios = <&gpioc 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
182 * tTransitionWindow = 1.687 uS * 8 = 13.5 uS
183 * tInterFrameGap = 1.687 uS * 17 = 28.68 uS
213 * tTransitionWindow = 1.687 uS * 8 = 13.5 uS
214 * tInterFrameGap = 1.687 uS * 17 = 28.68 uS
/Zephyr-latest/subsys/logging/
Dlog_output.c54 * highest severity and 7 to be the lowest (debugging level) severity.
63 * 7 Debug Debug-level messages
71 ret = 7U; in level_to_rfc5424_severity()
83 ret = 7U; in level_to_rfc5424_severity()
86 ret = 7U; in level_to_rfc5424_severity()
167 uint32_t us; in timestamp_print() local
174 us = (1000 * (remainder * 1000U - (ms * freq))) / freq; in timestamp_print()
188 time_str, ms * 1000U + us); in timestamp_print()
195 ms * 1000U + us); in timestamp_print()
208 total_seconds, ms * 1000U + us); in timestamp_print()
[all …]
/Zephyr-latest/boards/arduino/portenta_h7/
Darduino_portenta_h7-common.dtsi19 gpios = <&gpiok 7 GPIO_ACTIVE_LOW>;
148 * RefreshRate = 64 ms / 8192 cyc = 7.8125 us/cyc
149 * RefreshCycles = 7.8125 us * 90 MHz = 703
167 st,sdram-timing = < 2 7 5 7 2 3 3 >;
188 10 d8 00 ff 82 41 bd 00 81 e5 7b c6 44 03 67 38
/Zephyr-latest/drivers/adc/
Dadc_ite_it8xxx2.c32 /* ADC sample time delay (Unit:us) */
41 #define ADC_0_7_FULL_SCALE_MASK GENMASK(7, 0)
105 /* Support channels 0~7 and 13~16 */ in adc_it8xxx2_channel_setup()
106 if (!((channel_id >= 0 && channel_id <= 7) || in adc_it8xxx2_channel_setup()
205 /* Wait next clock time (1/32.768K~=30.5us) */ in adc_poll_valid_data()
443 * The ADC channel conversion time is 30.8*(SCLKDIV+1) us. in adc_it8xxx2_init()
444 * (Current setting is 61.6us) in adc_it8xxx2_init()
446 * NOTE: A sample time delay (60us) also need to be included in in adc_it8xxx2_init()
448 * In addition, the ADC has a waiting time of 202.8us for in adc_it8xxx2_init()
451 * So the final ADC sample time result is ~= 324.4us. in adc_it8xxx2_init()
/Zephyr-latest/drivers/timer/
Dleon_gptimer.c31 /* A GPTIMER can have maximum of 7 subtimers. */
32 #define GPTIMER_MAX_SUBTIMERS 7
43 #define GPTIMER_CTRL_WN (1 << 7)
53 #define GPTIMER_CFG_TIMERS (7 << 0)
76 return; /* interrupt not for us */ in timer_isr()
Dsy1xx_sys_timer.c30 #define SY1XX_TIMER_CLOCK_SOURCE_BIT 7
120 uint32_t us = cfg->tick_us; in sy1xx_sys_timer_config() local
122 (((double)us / (double)1000000) * (double)sy1xx_soc_get_rts_clock_frequency()) + in sy1xx_sys_timer_config()
/Zephyr-latest/drivers/flash/
Djesd216.c65 uint32_t dw17 = sys_le32_to_cpu(bfp->dw10[7]); in jesd216_bfp_read_support()
88 uint32_t dw17 = sys_le32_to_cpu(bfp->dw10[7]); in jesd216_bfp_read_support()
164 /* Each 7-bit erase time entry has a 5-bit count in the lower in jesd216_bfp_erase_type_times()
172 unsigned int count = 1 + ((dw10 >> (4 + (idx - 1) * 7)) & 0x1F); in jesd216_bfp_erase_type_times()
173 unsigned int units = ((dw10 >> (4 + 5 + (idx - 1) * 7)) & 0x03); in jesd216_bfp_erase_type_times()
272 case 0x01: /* 1 us */ in jesd216_bfp_decode_dw14()
275 case 0x02: /* 8 us */ in jesd216_bfp_decode_dw14()
278 case 0x03: /* 64 us */ in jesd216_bfp_decode_dw14()
/Zephyr-latest/boards/nxp/frdm_ke17z512/
Dfrdm_ke17z512.dts88 min-residency-us = <1>;
92 min-residency-us = <20000>;
93 exit-latency-us = <13>;
97 dmas = <&edma 5 6>, <&edma 6 7>;
/Zephyr-latest/drivers/dac/
Ddac_ad56xx.c18 * These values are actually all way less than 1us, but we can only
19 * wait with 1us precision.
187 0, 1, 2, 3, 4, 5, 6, 7,
200 0, 1, 2, 3, 4, 5, 6, 7,
213 0, 1, 2, 3, 4, 5, 6, 7,
226 0, 1, 2, 3, 4, 5, 6, 7,
239 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
252 0, 1, 2, 3, 4, 5, 6, 7,
265 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,

12345678910