| /hal_stm32-2.7.6/stm32cube/stm32g0xx/drivers/src/ |
| D | stm32g0xx_hal_pwr.c | 105 (+) Low-power run mode: core and peripherals are running at low frequency.
120 *** Low-power run mode ***
123 (+) Entry: (from main run mode)
152 the MCU is in Low-power Run mode.
175 [..] When exiting Stop, the MCU is either in Run mode or in Low-power Run mode
296 * in Run mode.
302 * @note Low-power Sleep mode is entered from Low-power Run mode only. In
303 * case Regulator parameter is set to Low Power but MCU is in Run mode,
304 * we will first enter in Low-power Run mode. Therefore, user should
306 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode.
[all …]
|
| D | stm32g0xx_hal_pwr_ex.c | 698 * run, low power sleep and stop modes.
716 * run, low power sleep and stop modes.
798 * @brief Enter Low-power Run mode
800 * low power run mode
801 * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode.
812 * @brief Exit Low-power Run mode.
|
| /hal_stm32-2.7.6/stm32cube/stm32wlxx/drivers/src/ |
| D | stm32wlxx_hal_pwr.c | 199 …(+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator …
217 *** Low-power run mode ***
220 (+) Entry: (from main run mode)
246 the MCU is in Low-power Run mode.
270 … When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
272 When exiting Stop 2 mode, the MCU is in Run mode.
457 * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
462 * @note Low-power Sleep mode is entered from Low-power Run mode (low-power regulator used
466 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
467 * Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API.
[all …]
|
| D | stm32wlxx_hal_pwr_ex.c | 612 * run and low power sleep modes.
647 * run and low power sleep modes.
850 * @brief Enter Low-power Run mode
851 * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode.
862 * @brief Exit Low-power Run mode.
895 * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode.
955 * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode.
1013 * @note In Stop 2 mode, all I/O pins keep the same state as in Run mode.
1104 - If system was in Run or Stop mode (other CPU in Run, Sleep, Stop), in HAL_PWREx_EnterSHUTDOWNMode()
|
| /hal_stm32-2.7.6/stm32cube/stm32l4xx/drivers/src/ |
| D | stm32l4xx_hal_pwr.c | 165 …(+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator …
176 *** Low-power run mode ***
179 (+) Entry: (from main run mode)
207 the MCU is in Low-power Run mode.
231 … When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
233 When exiting Stop 2 mode, the MCU is in Run mode.
423 * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
428 * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet
429 * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set
435 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
[all …]
|
| D | stm32l4xx_hal_flash_ramfunc.c | 9 * + FLASH Power Down in Run mode
89 * @brief Enable the Power down in Run Mode
95 /* Enable the Power Down in Run mode*/ in HAL_FLASHEx_EnableRunPowerDown()
103 * @brief Disable the Power down in Run Mode
109 /* Disable the Power Down in Run mode*/ in HAL_FLASHEx_DisableRunPowerDown()
|
| /hal_stm32-2.7.6/stm32cube/stm32g4xx/drivers/src/ |
| D | stm32g4xx_hal_pwr.c | 165 …(+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator …
175 *** Low-power run mode ***
178 (+) Entry: (from main run mode)
206 the MCU is in Low-power Run mode.
229 … When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
420 * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
425 * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet
426 * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set
432 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
433 * Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API.
[all …]
|
| D | stm32g4xx_hal_flash_ramfunc.c | 8 * + FLASH Power Down in Run mode
89 * @brief Enable the Power down in Run Mode
95 /* Enable the Power Down in Run mode*/ in HAL_FLASHEx_EnableRunPowerDown()
103 * @brief Disable the Power down in Run Mode
109 /* Disable the Power Down in Run mode*/ in HAL_FLASHEx_DisableRunPowerDown()
|
| /hal_stm32-2.7.6/stm32cube/stm32l5xx/drivers/src/ |
| D | stm32l5xx_hal_pwr.c | 165 …(+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator …
176 *** Low-power run mode ***
179 (+) Entry: (from main run mode)
207 the MCU is in Low-power Run mode.
231 … When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
233 When exiting Stop 2 mode, the MCU is in Run mode.
423 * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
428 * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet
429 * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set
435 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
[all …]
|
| D | stm32l5xx_hal_flash_ramfunc.c | 9 * + FLASH Power Down in Run mode
89 * @brief Enable the Power down in Run Mode
95 /* Enable the Power Down in Run mode*/ in HAL_FLASHEx_EnableRunPowerDown()
102 * @brief Disable the Power down in Run Mode
108 /* Disable the Power Down in Run mode*/ in HAL_FLASHEx_DisableRunPowerDown()
|
| D | stm32l5xx_hal_pwr_ex.c | 130 * @note The function shall not be called in Low-power run mode (meaningless and misleading).
818 * @brief Enter Low-power Run mode
819 * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode.
835 * @brief Exit Low-power Run mode.
869 * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode.
921 * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode.
972 * @note In Stop 2 mode, all I/O pins keep the same state as in Run mode.
1276 * @note The function shall not be called in Low-power run mode (meaningless and misleading).
|
| /hal_stm32-2.7.6/stm32cube/stm32wbxx/drivers/src/ |
| D | stm32wbxx_hal_pwr.c | 218 …(+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator …
234 *** Low-power run mode ***
237 (+) Entry: (from main run mode)
263 the MCU is in Low-power Run mode.
288 … When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
290 When exiting Stop 2 mode, the MCU is in Run mode.
477 * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
482 * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet
483 * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set
489 * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
[all …]
|
| D | stm32wbxx_hal_pwr_ex.c | 673 * run and low power sleep modes.
696 * run and low power sleep modes.
917 * - step down mode if system low power mode is run, LP run or stop,
931 * - step down mode if system low power mode is run, LP run or stop,
943 * - step down mode if system low power mode is run, LP run or stop,
1034 * @brief Enter Low-power Run mode
1035 * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode.
1051 * @brief Exit Low-power Run mode.
1084 * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode.
1140 * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode.
[all …]
|
| /hal_stm32-2.7.6/stm32cube/stm32f4xx/drivers/src/ |
| D | stm32f4xx_hal_flash_ramfunc.c | 8 * + Stop/Start the flash interface while System Run
9 * + Enable/Disable the flash sleep while System Run
90 * @brief Stop the flash interface while System Run
100 /* Stop the flash interface while System Run */ in HAL_FLASHEx_StopFlashInterfaceClk()
107 * @brief Start the flash interface while System Run
117 /* Start the flash interface while System Run */ in HAL_FLASHEx_StartFlashInterfaceClk()
124 * @brief Enable the flash sleep while System Run
134 /* Enable the flash sleep while System Run */ in HAL_FLASHEx_EnableFlashSleepMode()
141 * @brief Disable the flash sleep while System Run
151 /* Disable the flash sleep while System Run */ in HAL_FLASHEx_DisableFlashSleepMode()
|
| /hal_stm32-2.7.6/stm32cube/stm32l0xx/drivers/src/ |
| D | stm32l0xx_hal_pwr_ex.c | 120 * @brief Enable the Low Power Run mode.
121 * @note Low power run mode can only be entered when VCORE is in range 2.
123 * power run mode is selected. Only Stop and Sleep modes with regulator
124 * configured in Low power mode is allowed when Low power run mode is
128 * @note In Low power run mode, all I/O pins keep the same state as in Run mode.
133 /* Enters the Low Power Run mode */ in HAL_PWREx_EnableLowPowerRunMode()
139 * @brief Disable the Low Power Run mode.
150 /* Exit the Low Power Run mode */ in HAL_PWREx_DisableLowPowerRunMode()
|
| D | stm32l0xx_hal_flash_ramfunc.c | 111 * @brief Enable the power down mode during RUN mode.
117 /* Enable the Power Down in Run mode*/ in HAL_FLASHEx_EnableRunPowerDown()
124 * @brief Disable the power down mode during RUN mode.
130 /* Disable the Power Down in Run mode*/ in HAL_FLASHEx_DisableRunPowerDown()
151 * To correctly run this function, the @ref HAL_FLASH_Unlock() function
207 * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
288 * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
358 This subsection permit to get in run-time errors of the FLASH peripheral.
421 * as expected. If the user run an application using the first in FLASHRAM_SetErrorCode()
493 * as expected. If the user run an application using the first in FLASHRAM_WaitForLastOperation()
|
| D | stm32l0xx_hal_pwr.c | 158 (+) Low power run mode: regulator in low power mode, limited clock frequency,
166 *** Low power run mode ***
169 To further reduce the consumption when the system is in Run mode, the regulator can be
172 In Low power run mode, all I/O pins keep the same state as in Run mode.
228 In Stop mode, all I/O pins keep the same state as in Run mode.
452 * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
524 * @note In Stop mode, all I/O pins keep the same state as in Run mode.
635 * Setting this bit is useful when the processor is expected to run only on
|
| /hal_stm32-2.7.6/stm32cube/stm32l1xx/drivers/src/ |
| D | stm32l1xx_hal_pwr_ex.c | 116 * @brief Enters the Low Power Run mode.
117 * @note Low power run mode can only be entered when VCORE is in range 2.
119 * power run mode is selected. Only Stop and Sleep modes with regulator
120 * configured in Low power mode is allowed when Low power run mode is
122 * @note In Low power run mode, all I/O pins keep the same state as in Run mode.
127 /* Enters the Low Power Run mode */ in HAL_PWREx_EnableLowPowerRunMode()
133 * @brief Exits the Low Power Run mode.
138 /* Exits the Low Power Run mode */ in HAL_PWREx_DisableLowPowerRunMode()
|
| D | stm32l1xx_hal_flash_ramfunc.c | 111 * @brief Enable the power down mode during RUN mode.
117 /* Enable the Power Down in Run mode*/ in HAL_FLASHEx_EnableRunPowerDown()
124 * @brief Disable the power down mode during RUN mode.
130 /* Disable the Power Down in Run mode*/ in HAL_FLASHEx_DisableRunPowerDown()
151 * To correctly run this function, the @ref HAL_FLASH_Unlock() function
207 * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
285 * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
358 This subsection permit to get in run-time errors of the FLASH peripheral.
414 * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function
474 * @note To correctly run this function, the HAL_FLASH_EEPROM_Unlock() function
|
| D | stm32l1xx_hal_pwr.c | 176 (+) Low power run mode: regulator in low power mode, limited clock frequency,
184 *** Low power run mode ***
187 To further reduce the consumption when the system is in Run mode, the regulator can be
190 In Low power run mode, all I/O pins keep the same state as in Run mode.
245 In Stop mode, all I/O pins keep the same state as in Run mode.
433 * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
475 * @note In Stop mode, all I/O pins keep the same state as in Run mode.
553 * Setting this bit is useful when the processor is expected to run only on
|
| /hal_stm32-2.7.6/stm32cube/stm32u5xx/drivers/include/ |
| D | stm32u5xx_ll_pwr.h | 223 /** @defgroup PWR_LL_EC_SRAM1_RUN_CONTENTS_RETENTION PWR SRAM1 Content Retention in Run Mode
226 #define LL_PWR_SRAM1_RUN_NO_RETENTION 0U /*!< SRAM1 no retention in Run mode */
227 #define LL_PWR_SRAM1_RUN_FULL_RETENTION PWR_CR1_SRAM1PD /*!< SRAM1 retention in Run mode */
232 /** @defgroup PWR_LL_EC_SRAM2_RUN_CONTENTS_RETENTION PWR SRAM2 Content Retention in Run Mode
235 #define LL_PWR_SRAM2_RUN_NO_RETENTION 0U /*!< SRAM2 no retention in Run mode */
236 #define LL_PWR_SRAM2_RUN_FULL_RETENTION PWR_CR1_SRAM2PD /*!< SRAM2 retention in Run mode */
241 /** @defgroup PWR_LL_EC_SRAM3_RUN_CONTENTS_RETENTION PWR SRAM3 Content Retention in Run Mode
244 #define LL_PWR_SRAM3_RUN_NO_RETENTION 0U /*!< SRAM3 no retention in Run mode */
245 #define LL_PWR_SRAM3_RUN_FULL_RETENTION PWR_CR1_SRAM3PD /*!< SRAM3 retention in Run mode */
250 /** @defgroup PWR_LL_EC_SRAM4_RUN_CONTENTS_RETENTION PWR SRAM4 Content Retention in Run Mode
[all …]
|
| D | stm32u5xx_hal_pwr_ex.h | 96 #define PWR_SRD_DOMAIN_RUN PWR_CR2_SRDRUN /*!< SRD in Run mode when system goes to Stop 0/1/2 mode…
157 /** @defgroup PWREx_SRAMx_Contents_Run_Retention PWR Extended SRAM Contents Run Retention
160 #define PWR_SRAM1_FULL_RUN_RETENTION PWR_CR1_SRAM1PD /*!< SRAM1 full retention in Run mode */
161 #define PWR_SRAM2_FULL_RUN_RETENTION PWR_CR1_SRAM2PD /*!< SRAM2 full retention in Run mode */
162 #define PWR_SRAM3_FULL_RUN_RETENTION PWR_CR1_SRAM3PD /*!< SRAM3 full retention in Run mode */
163 #define PWR_SRAM4_FULL_RUN_RETENTION PWR_CR1_SRAM4PD /*!< SRAM4 full retention in Run mode */
699 /* All available RAM retention in Run mode define */
805 /* RAMs retention in Run mode check macro */
|
| /hal_stm32-2.7.6/stm32cube/stm32wbxx/drivers/include/ |
| D | stm32wbxx_ll_pwr.h | 196 /** @defgroup PWR_LL_EC_FLASH_LPRUN_POWER_DOWN_MODE Flash power-down mode during low-power run mode
344 …SF) /*!< SMPS step down in step down mode if system low power mode is run, LP run or stop0. If sy…
435 * @brief Switch from run main mode to run low-power mode.
445 * @brief Switch from run main mode to low-power mode.
561 * @brief Set flash power-down mode during low-power run mode
578 * @brief Get flash power-down mode during low-power run mode
1342 * - step down mode if system low power mode is run, LP run or stop0,
1364 * - step down mode if system low power mode is run, LP run or stop0,
1385 * - step down mode if system low power mode is run, LP run or stop0,
1399 * - step down mode if system low power mode is run, LP run or stop0,
[all …]
|
| /hal_stm32-2.7.6/stm32cube/stm32u5xx/drivers/src/ |
| D | stm32u5xx_hal_pwr_ex.c | 69 (#) Call HAL_PWREx_ConfigSRDDomain() to force in Run mode or to enter in Stop
70 mode Smart Run Domain when the system enters Stop mode (Stop 0/1/2).
140 enable / disable the RAMs content retention in Run mode.
765 * @arg PWR_SRD_DOMAIN_RUN : SRD in Run mode when system
782 * in Range 4 (Run, Sleep or Stop 0 mode).
1554 during Run mode.
1555 (+) Retained content RAMs in Run modes are :
1898 * @brief Enable RAMs full content retention in Run mode.
1899 * @param RAMSelection : Specifies the SRAM content to be retained in Run mode.
1912 /* Enable RAM retention in Run mode */ in HAL_PWREx_EnableRAMsContentRunRetention()
[all …]
|
| /hal_stm32-2.7.6/.github/workflows/ |
| D | test.yml | 19 run: |
24 run: flake8 --config scripts/.flake8 scripts
25 - name: run script tests
26 run: |
|
