| /Zephyr-latest/scripts/tests/twister_blackbox/ |
| D | test_hardwaremap.py | 4 # SPDX-License-Identifier: Apache-2.0
10 import os
17 sys.path.insert(0, os.path.join(ZEPHYR_BASE, "scripts/pylib/twister/twisterlib"))
26 'MBED'
29 'DAPLink CMSIS-DAP',
30 'MBED CMSIS-DAP'
41 'J-Link',
42 'J-Link OB'
56 'STLINK-V3'
68 'TTL232R-3V3',
[all …]
|
| /Zephyr-latest/boards/vngiotlab/nrf51_vbluno51/doc/ |
| D | index.rst | 28 - CPU:
35 + GPIO Voltage: 0 - 3.3V.
36 - DAPLink (CMSIS-DAP) interface for program and debug:
38 + USB HID (DAP): CMSIS-DAP compliant debug channel.
41 - Supports hardware flow control features (RTS/CTS).
42 - *Energy monitoring for BLE module by current measurement (Only VBLUno51_EM)*
43 - FOTA (Firmware over the air): Upgrade firmware over BLE interface.
44 - Build good applications with:
46 + Frameworks: Arduino, ARM mbed-OS, Zephyr-OS, Nordic SDK, RIOT-OS, MyNewt-OS, ChibiOS, NuttX RTOS
47 + A lot of tutorials for Arduino, mbed-os and more.
[all …]
|
| /Zephyr-latest/modules/mbedtls/ |
| D | create_psa_files.py | 4 # SPDX-License-Identifier: Apache-2.0
7 import os
12 SCRIPT_PATH = os.path.dirname(__file__)
13 INPUT_REL_PATH = os.path.join("..", "..", "..", "modules", "crypto", "mbedtls",
15 INPUT_FILE = os.path.normpath(os.path.join(SCRIPT_PATH, INPUT_REL_PATH))
17 KCONFIG_PATH=os.path.join(SCRIPT_PATH, "Kconfig.psa.auto")
18 HEADER_PATH=os.path.join(SCRIPT_PATH, "configs", "config-psa.h")
22 # SPDX-License-Identifier: Apache-2.0
38 """.format(os.path.basename(__file__), INPUT_REL_PATH)
46 * SPDX-License-Identifier: Apache-2.0
[all …]
|
| /Zephyr-latest/boards/nxp/lpcxpresso11u68/support/ |
| D | openocd.cfg | 5 # https://www.embeddedartists.com/products/lpc11u68-lpcxpresso/
6 # https://os.mbed.com/platforms/LPCXpresso11U68/
9 # The on-board LPC-Link2 debug probe (based on a NXP LPC43xx MCU) provides
10 # either a CMSIS-DAP or a J-Link interface. It depends on the version of the
12 source [find interface/cmsis-dap.cfg]
15 # NXP LPC11U68 Cortex-M0 with 256kB flash and 32kB + 4kB SRAM.
20 # This ensures that the interrupt vectors (0x0000-0x0200) are re-mapped to
28 # 0x0 Boot Loader Mode. Interrupt vectors are re-mapped to
30 # 0x1 User RAM Mode. Interrupt vectors are re-mapped to
32 # 0x2 User Flash Mode. Interrupt vectors are not re-mapped
[all …]
|
| /Zephyr-latest/boards/shields/semtech_sx1262mb2das/doc/ |
| D | index.rst | 14 at the `mbed SX1262MB2xAS website`_.
19 +-----------------------+-----------------+
23 +-----------------------+-----------------+
25 +-----------------------+-----------------+
27 +-----------------------+-----------------+
29 +-----------------------+-----------------+
31 +-----------------------+-----------------+
33 +-----------------------+-----------------+
35 +-----------------------+-----------------+
37 +-----------------------+-----------------+
[all …]
|
| /Zephyr-latest/boards/shields/semtech_sx1272mb2das/doc/ |
| D | index.rst | 14 at the `mbed SX1272MB2xAS website`_.
19 +-----------------------+-----------------+
23 +-----------------------+-----------------+
25 +-----------------------+-----------------+
27 +-----------------------+-----------------+
29 +-----------------------+-----------------+
31 +-----------------------+-----------------+
33 +-----------------------+-----------------+
35 +-----------------------+-----------------+
37 +-----------------------+-----------------+
[all …]
|
| /Zephyr-latest/boards/ezurio/bt510/doc/ |
| D | bt510.rst | 6 …tooth v5 Long Range integrated sensor that uses a Nordic Semiconductor nRF52840 ARM Cortex-M4F CPU.
14 * :abbr:`I2C (Inter-Integrated Circuit)`
21 * :abbr:`UART (Universal Asynchronous Receiver-Transmitter)`
39 .. zephyr:board-supported-hw::
45 ---
53 ------------
60 -----------------------
67 -------------
77 ------------------
95 A non-standard layout is used to include access to the sensor debug UART.
[all …]
|
| /Zephyr-latest/boards/shields/semtech_sx1276mb1mas/doc/ |
| D | index.rst | 12 More information about the shield can be found at the `mbed SX1276MB1xAS
18 +-----------------------+-----------------+
22 +-----------------------+-----------------+
24 +-----------------------+-----------------+
26 +-----------------------+-----------------+
28 +-----------------------+-----------------+
30 +-----------------------+-----------------+
32 +-----------------------+-----------------+
34 +-----------------------+-----------------+
36 +-----------------------+-----------------+
[all …]
|
| /Zephyr-latest/boards/nxp/lpcxpresso11u68/doc/ |
| D | index.rst | 7 on an ARM Cortex-M0+ core.
14 - LPC11U68 microcontroller in LQFP100 package
15 - ARM Cortex-M0+
16 - Memory:
18 - 256KB of flash memory
19 - 32KB of SRAM
20 - 2x2KB of additional SRAM
21 - 4 KB EEPROM
22 - USB:
24 - USB 2.0 Full-Speed device controller
[all …]
|
| /Zephyr-latest/boards/ronoth/lodev/doc/ |
| D | index.rst | 29 Programming and debugging uses the SWD port, as on any STM32 processor. An ST-LINK/V2 adapter
30 may be used with the appropriate software (*st-utils* package on Linux).
33 Connector Pin-Out
36 The LoDev has two rows of headers. Pin 1 on both connectors is closest to the micro-USB connector …
39 When viewed from the top (component) side of the board, with the micro-USB connector closest and RF…
42 UART1 on the S76S SiP is connected to a USB-to-UART device connected to the micro USB connector, so…
43 PA9 and PA10 are unavailable for I/Os.
55 -----------
56 CN6 Pin-Out
57 -----------
[all …]
|
| /Zephyr-latest/boards/others/black_f407ve/doc/ |
| D | index.rst | 6 The BLACK_F407VE board features an ARM Cortex-M4 based STM32F407xx MCU
11 - STM32 microcontroller in LQFP100 package
12 - Extension header for all LQFP100 I/Os for quick connection to prototyping
14 - Flexible board power supply:
16 - USB VBUS or external source (3.3V, 5V)
17 - Power management access point
19 - Three LEDs:
21 - 3.3 V power on (LD0)
22 - Two user LEDs: green (LD1), green (LD2)
24 - Four push-buttons: RESET, K0, K1 and WK_UP
[all …]
|
| /Zephyr-latest/scripts/pylib/twister/twisterlib/ |
| D | hardwaremap.py | 5 # SPDX-License-Identifier: Apache-2.0
8 import os
30 print("Install tabulate python module with pip to use --device-testing option.")
133 schema_path = os.path.join(ZEPHYR_BASE, "scripts", "schemas", "twister", "hwmap-schema.yaml")
138 'MBED',
155 'DAPLink CMSIS-DAP',
156 'MBED CMSIS-DAP'
159 'J-Link',
160 'J-Link OB'
163 'STM32 STLink', '^XDS110.*', 'STLINK-V3'
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_ke15z/doc/ |
| D | index.rst | 6 The FRDM-KE15Z is a development board for NXP Kinetis KE1xZ 32-bit
7 MCU-based platforms. The FRDM-KE15Z contains a robust TSI module
10 communication, flash programming, and run-control debugging.
15 - MKE15Z256VLL7 MCU (up to 72 MHz, 256 KB flash memory, 32 KB RAM)
16 - OpenSDA Debug Circuit with a virtual serial port
17 - Touch electrodes in the self-capacitive mode
18 - Compatible with FRDM-TOUCH, FRDM-MC-LVBLDC, and Arduino® boards
19 - User Components such as Reset; RGB LED and two user buttons
20 - 6-axis FXOS8700CQ digital accelerometer and magnetometer
22 For more information about the KE1xZ SoC and the FRDM-KE15Z board, see
[all …]
|
| /Zephyr-latest/boards/st/stm32h747i_disco/doc/ |
| D | index.rst | 7 from audio, multi-sensor support, graphics, security, video,
8 and high-speed connectivity features.
10 The board includes an STM32H747XI SoC with a high-performance DSP, Arm Cortex-M7 + Cortex-M4 MCU,
12 large set of peripherals, SMPS, and MIPI-DSI.
16 - On-board ST-LINK/V3E supporting USB reenumeration capability
17 - USB ST-LINK functions: virtual COM port, mass storage, debug port
18 - Flexible power-supply options:
20 - ST-LINK USB VBUS, USB OTG HS connector, or external sources
22 - 4” capacitive touch LCD display module with MIPI® DSI interface
23 - Ethernet compliant with IEEE802.3-2002
[all …]
|
| /Zephyr-latest/boards/st/nucleo_l412rb_p/doc/ |
| D | index.rst | 6 The Nucleo L412RB board features an ARM Cortex-M4 based STM32L412RB MCU
10 - STM32 microcontroller in LQFP64 package
11 - 1 user LED shared with ARDUINO |reg|
12 - 1 user and 1 reset push-buttons
13 - 32.768 kHz crystal oscillator
14 - Two types of extension resources:
16 - Arduino Uno V3 connectivity
17 - ST morpho extension pin headers for full access to all STM32 I/Os
19 - On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual CO…
20 - Flexible power-supply options: ST-LINK, USB VBUS, or external sources
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_ke17z512/doc/ |
| D | index.rst | 6 The FRDM-KE17Z512 is a development board for NXP Kinetis KE1xZ 32-bit
7 MCU-based platforms. The onboard OpenSDAv2 serial and debug adapter,
9 communication, flash programming, and run-control debugging.
14 - MKE17Z512VLL9 MCU (up to 96 MHz, 512 KB flash memory, 96 KB RAM,
16 - 3.3 V or 5 V MCU operation
17 - 6-axis FXOS8700CQ digital accelerometer and magnetometer
18 - RGB LED
19 - Two user push-buttons
20 - Thermistor
21 - Arduino compatible I/O pin header
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_ke17z/doc/ |
| D | index.rst | 6 The FRDM-KE17Z is a development board for NXP Kinetis KE1xZ 32-bit
7 MCU-based platforms. The FRDM-KE17Z contains a robust TSI module
10 communication, flash programming, and run-control debugging.
15 - MKE17Z256VLL7 MCU (up to 72 MHz, 256 KB flash memory, 48 KB SRAM,
17 - 3.3 V or 5 V MCU operation
18 - 6-axis FXOS8700CQ digital accelerometer
19 - 3-axis digital angular rate gyroscope
20 - One RGB LED
21 - Two user push-buttons
22 - Thermistor
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_kl25z/doc/ |
| D | index.rst | 6 The Freedom KL25Z is an ultra-low-cost development platform for
8 on ARM |reg| Cortex |reg|-M0+ processor.
10 The FRDM-KL25Z features include easy access to MCU I/O, battery-ready,
11 low-power operation, a standard-based form factor with expansion board
12 options and a built-in debug interface for flash programming and run-control.
17 - MKL25Z128VLK4 MCU @ 48 MHz, 128 KB flash, 16 KB SRAM, USB OTG (FS), 80LQFP
18 - On board capacitive touch "slider", MMA8451Q accelerometer, and tri-color LED
19 - OpenSDA debug interface
21 For more information about the KL25Z SoC and FRDM-KL25Z board:
23 - `KL25Z Website`_
[all …]
|
| /Zephyr-latest/boards/nxp/twr_ke18f/doc/ |
| D | index.rst | 6 The TWR-KE18F is a development board for NXP Kinetis KE1xF 32-bit
7 MCU-based platforms. The onboard OpenSDAv2 serial and debug adapter,
9 communication, flash programming, and run-control debugging.
14 - MKE18F512VLL16 MCU (up to 168 MHz, 512 KB flash memory, 64 KB RAM,
16 - 3.3 V or 5 V MCU operation
17 - 6-axis FXOS8700CQ digital accelerometer and magnetometer
18 - RGB LED
19 - Four user LEDs
20 - Two user push-buttons
21 - Potentiometer
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_k82f/doc/ |
| D | index.rst | 6 The FRDM-K82F is a low-cost development platform for Kinetis K80, K81,
9 - Form-factor compatible with the Arduino R3 pin layout
10 - Peripherals enable rapid prototyping, including a six-axis digital
12 tri-colored LED and two user push-buttons for direct interaction, 2x32 Mb
14 with Bluetooth and 2.4 GHz radio add-on modules
15 - OpenSDAv2.1, the NXP open source hardware embedded serial and debug adapter
17 flash programming, and run-control debugging
22 - MK82FN256VLL15 MCU (150 MHz, 256 KB flash memory, 256 KB RAM, low-power,
23 crystal-less USB, and 100 Low profile Quad Flat Package (LQFP))
24 - Dual role USB interface with micro-B USB connector
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_k22f/doc/ |
| D | index.rst | 6 The Freedom-K22F is an ultra-low-cost development platform for Kinetis K22
9 - Form-factor compatible with the Arduino R3 pin layout
10 - Peripherals enable rapid prototyping, including a 6-axis digital
12 tri-colored LED and 2 user push-buttons for direct interaction, a optional
14 add-on modules
15 - OpenSDAv2, the NXP open source hardware embedded serial and debug adapter
17 flash programming, and run-control debugging
22 - MK22FN512VLH12 (120 MHz, 512 KB flash memory, 128 KB RAM, low-power,
23 crystal-less USB, and 64 pin Low profile Quad Flat Package (LQFP))
24 - Dual role USB interface with micro-B USB connector
[all …]
|
| /Zephyr-latest/doc/releases/ |
| D | release-notes-4.0.rst | 15 is now the standard way to provide device-specific protection to data at rest. (:github:`76222`)
18 :ref:`ZMS <zms_api>` is a new key-value storage subsystem compatible with all non-volatile storage
25 runtime configuration through vendor specific APIs. Initially the :dtcompatible:`nordic,nrf-comp`,
26 :dtcompatible:`nordic,nrf-lpcomp` and :dtcompatible:`nxp,kinetis-acmp` are supported.
31 Initially implemented drivers include a simple :dtcompatible:`zephyr,gpio-steppers` and a complex
32 sensor-less stall-detection capable with integrated ramp-controller :dtcompatible:`adi,tmc5041`.
50 directory for :zephyr:code-sample-category:`code samples <samples>`.
70 * :cve:`2024-8798`: Under embargo until 2024-11-22
71 * :cve:`2024-10395`: Under embargo until 2025-01-23
72 * :cve:`2024-11263` `Zephyr project bug tracker GHSA-jjf3-7x72-pqm9
[all …]
|
| D | release-notes-1.8.rst | 13 * Ecosystem: Tracing, debugging support through third-party tools (openocd,
39 * arm: Fixed nRF52840-QIAA SoC support for device tree
61 * Support for new ARM board FRDM-KL25Z
66 * arm: Added support for STM32F469I-DISCO board
72 * UART interrupt-driver API is better defined
73 * Support for pull-style console API
89 * HTTP Basic-Auth support added
91 * Add block wise support to CoAP for well-known response
124 * Bluetooth 5.0: The Controller reports itself as 5.0-capable
126 * Bluetooth 5.0: Added Multiple PHY support, both 2Mbit/s and long-range coded
[all …]
|
| /Zephyr-latest/boards/nxp/frdm_k64f/doc/ |
| D | index.rst | 6 The Freedom-K64F is an ultra-low-cost development platform for Kinetis K64,
9 - Form-factor compatible with the Arduino R3 pin layout
10 - Peripherals enable rapid prototyping, including a 6-axis digital
12 tri-colored LED and 2 user push-buttons for direct interaction, a microSD
14 with Bluetooth* and 2.4 GHz radio add-on modules
15 - OpenSDAv2, the NXP open source hardware embedded serial and debug adapter
17 flash programming, and run-control debugging
22 - MK64FN1M0VLL12 MCU (120 MHz, 1 MB flash memory, 256 KB RAM, low-power,
23 crystal-less USB, and 100 Low profile Quad Flat Package (LQFP))
24 - Dual role USB interface with micro-B USB connector
[all …]
|
| /Zephyr-latest/boards/nxp/lpcxpresso55s69/doc/ |
| D | index.rst | 7 of and development with the LPC55S6x MCU based on the Arm® Cortex®-M33
9 subsystem, and accelerometer, with several options for adding off-the-shelf
10 add-on boards for networking, sensors, displays, and other interfaces.
15 - LPC55S69 dual core Arm Cortex-M33 microcontroller running at up to 100 MHz
16 - Onboard, high-speed USB, Link2 debug probe with CMSIS-DAP and SEGGER J-Link
18 - UART and SPI port bridging from LPC55S69 target to USB via the onboard debug
20 - Hardware support for external debug probe
21 - 3 x user LEDs, plus Reset, ISP (3) and user buttons
22 - Micro SD card slot (4-bit SDIO)
23 - NXP MMA8652FCR1 accelerometer
[all …]
|
