Searched +full:current +full:- +full:speed (Results 1 – 25 of 752) sorted by relevance
12345678910>>...31
| /Zephyr-Core-3.5.0/dts/bindings/bluetooth/ |
| D | infineon,cyw43xxx-bt-hci.yaml | 4 # SPDX-License-Identifier: Apache-2.0
14 current-speed = <115200>;
16 /* HCI-UART pins*/
17 pinctrl-0 = <&p3_1_scb2_uart_tx &p3_0_scb2_uart_rx
19 pinctrl-names = "default";
21 bt-hci {
23 compatible = "infineon,cyw43xxx-bt-hci";
24 bt-reg-on-gpios = <&gpio_prt3 4 (GPIO_ACTIVE_HIGH)>;
26 fw-download-speed = <3000000>;
30 NOTE1: The UART bus speed (current_speed) for zephyr_bt_uart should be the same
[all …]
|
| /Zephyr-Core-3.5.0/include/zephyr/bluetooth/audio/ |
| D | media_proxy.h | 2 * Copyright (c) 2019 - 2021 Nordic Semiconductor ASA
4 * SPDX-License-Identifier: Apache-2.0
84 }; /* - (type, length, param) */
87 * @brief Playback speed parameters
89 * All values from -128 to 127 allowed, only some defined
91 #define MEDIA_PROXY_PLAYBACK_SPEED_MIN -128
92 #define MEDIA_PROXY_PLAYBACK_SPEED_QUARTER -128
93 #define MEDIA_PROXY_PLAYBACK_SPEED_HALF -64
99 * @brief Seeking speed factors
101 * The allowed values for seeking speed are the range -64 to -4
[all …]
|
| /Zephyr-Core-3.5.0/dts/arm64/ti/ |
| D | ti_am62x_a53.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 #include <arm64/armv8-a.dtsi>
10 #include <zephyr/dt-bindings/interrupt-controller/arm-gic.h>
11 #include <zephyr/dt-bindings/pinctrl/ti-k3-pinctrl.h>
14 #address-cells = <1>;
15 #size-cells = <1>;
18 #address-cells = <1>;
19 #size-cells = <0>;
23 compatible = "arm,cortex-a53";
33 compatible = "arm,armv8-timer";
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/vmu_rt1170/ |
| D | vmu_rt1170.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
7 #include "vmu_rt1170-pinctrl.dtsi"
18 compatible = "gpio-leds";
19 green_led: led-1 {
24 red_led: led-2 {
29 blue_led: led-3 {
42 pinctrl-0 = <&pinmux_lpuart1>;
43 pinctrl-names = "default";
44 current-speed = <115200>;
49 pinctrl-0 = <&pinmux_lpuart3>;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/cy8cproto_062_4343w/ |
| D | cy8cproto_062_4343w.dts | 3 * SPDX-License-Identifier: Apache-2.0
6 /dts-v1/;
9 #include "cy8cproto_062_4343w-common.dtsi"
10 #include "cy8cproto_062_4343w-pinctrl.dtsi"
17 uart-5 = &uart5;
18 i2c-0 = &i2c3;
26 zephyr,shell-uart = &uart5;
36 compatible = "infineon,cat1-uart";
38 current-speed = <115200>;
40 pinctrl-0 = <&p5_1_scb5_uart_tx &p5_0_scb5_uart_rx>;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/qemu_cortex_m3/ |
| D | qemu_cortex_m3.dts | 1 /* SPDX-License-Identifier: Apache-2.0 */
3 /dts-v1/;
8 model = "QEMU Cortex-M3";
9 compatible = "ti,lm3s6965evb-qemu", "ti,lm3s6965";
12 uart-0 = &uart0;
13 uart-1 = &uart1;
14 uart-2 = &uart2;
21 zephyr,shell-uart = &uart0;
22 zephyr,bt-uart = &uart2;
23 zephyr,uart-pipe = &uart1;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/96b_aerocore2/ |
| D | 96b_aerocore2.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include <st/f4/stm32f427v(g-i)tx-pinctrl.dtsi>
18 zephyr,shell-uart = &uart7;
25 compatible = "gpio-leds";
39 volt-sensor0 = &vref;
40 volt-sensor1 = &vbat;
46 clock-frequency = <DT_FREQ_M(24)>;
51 div-m = <24>;
52 mul-n = <336>;
[all …]
|
| /Zephyr-Core-3.5.0/samples/drivers/uart/native_tty/boards/ |
| D | native_posix.overlay | 4 compatible = "zephyr,native-tty-uart";
5 current-speed = <115200>;
6 serial-port = "/dev/ttyUSB0";
11 compatible = "zephyr,native-tty-uart";
12 current-speed = <115200>;
13 serial-port = "/dev/ttyUSB1";
|
| /Zephyr-Core-3.5.0/samples/net/openthread/coprocessor/boards/ |
| D | tlsr9518adk80d.overlay | 4 * SPDX-License-Identifier: Apache-2.0
9 zephyr,ot-uart = &uart0;
16 current-speed = <57600>;
17 pinctrl-0 = <&uart0_tx_pb2_default &uart0_rx_pb3_default>;
18 pinctrl-names = "default";
23 current-speed = <115200>;
24 pinctrl-0 = <&uart1_tx_pc6_default &uart1_rx_pc7_default>;
25 pinctrl-names = "default";
|
| /Zephyr-Core-3.5.0/boards/arm/mm_feather/ |
| D | mm_feather.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mm_feather-pinctrl.dtsi"
13 model = "MM MM-FEATHER board";
28 zephyr,shell-uart = &lpuart1;
33 /* Micron MT48LC16M16A2B4-6AIT:G */
39 compatible = "gpio-leds";
61 compatible = "nxp,imx-flexspi-nor";
64 spi-max-frequency = <133000000>;
66 jedec-id = [9d 70 17];
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/arduino_portenta_h7/ |
| D | arduino_portenta_h7-common.dtsi | 4 * SPDX-License-Identifier: Apache-2.0
9 compatible = "gpio-leds";
44 pinctrl-0 = <&uart4_tx_pa0 &uart4_rx_pi9>;
45 pinctrl-names = "default";
46 current-speed = <115200>;
51 pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
52 pinctrl-names = "default";
53 current-speed = <115200>;
58 pinctrl-0 = <&usart6_tx_pg14 &usart6_rx_pg9>;
59 pinctrl-names = "default";
[all …]
|
| /Zephyr-Core-3.5.0/boards/nios2/qemu_nios2/ |
| D | qemu_nios2.dts | 1 /* SPDX-License-Identifier: Apache-2.0 */
3 /dts-v1/;
5 #include <intel/nios2-qemu.dtsi>
12 uart-0 = &jtag_uart;
13 uart-1 = &ns16550_uart;
20 zephyr,shell-uart = &ns16550_uart;
26 current-speed = <115200>;
31 current-speed = <115200>;
|
| /Zephyr-Core-3.5.0/boards/arm/mps3_an547/ |
| D | mps3_an547-common.dtsi | 2 * Copyright (c) 2019-2021 Linaro Limited
4 * SPDX-License-Identifier: Apache-2.0
7 sysclk: system-clock {
8 compatible = "fixed-clock";
9 clock-frequency = <25000000>;
10 #clock-cells = <0>;
14 compatible = "arm,cmsdk-gpio";
17 gpio-controller;
18 #gpio-cells = <2>;
22 compatible = "arm,cmsdk-gpio";
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/bcm958402m2_m7/ |
| D | bcm958402m2_m7.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
9 #include <broadcom/viper-m7.dtsi>
13 #address-cells = <1>;
14 #size-cells = <1>;
18 zephyr,shell-uart = &uart1;
25 * Setting the current-speed as 0 will retain the baud rate
26 * configured by bootrom and it will not be re-configured.
28 current-speed = <0>;
|
| /Zephyr-Core-3.5.0/boards/arm/cy8ckit_062_ble/ |
| D | cy8ckit_062_ble_m0_1_0_0.overlay | 4 * SPDX-License-Identifier: Apache-2.0
9 uart-2 = &uart2;
14 zephyr,shell-uart = &uart2;
20 current-speed = <115200>;
22 interrupt-parent = <&intmux_ch21>;
24 pinctrl-0 = <&p9_0_uart2_rx &p9_1_uart2_tx>;
29 current-speed = <115200>;
31 interrupt-parent = <&intmux_ch22>;
33 pinctrl-0 = <&p5_0_uart5_rx &p5_1_uart5_tx>;
|
| /Zephyr-Core-3.5.0/boards/arm/bcm958401m2/ |
| D | bcm958401m2.dts | 1 /* SPDX-License-Identifier: Apache-2.0 */
6 /dts-v1/;
12 #address-cells = <1>;
13 #size-cells = <1>;
17 zephyr,shell-uart = &uart1;
24 * Setting the current-speed as 0 will retain the baud rate
25 * configured by bootrom and it will not be re-configured.
27 current-speed = <0>;
|
| /Zephyr-Core-3.5.0/boards/x86/acrn/ |
| D | acrn.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
21 uart-0 = &uart0;
22 uart-1 = &uart1;
28 zephyr,shell-uart = &uart0;
34 current-speed = <115200>;
39 current-speed = <115200>;
|
| /Zephyr-Core-3.5.0/dts/bindings/i2c/ |
| D | atmel,sam-i2c-twim.yaml | 1 # Copyright (c) 2020-2023 Gerson Fernando Budke <nandojve@gmail.com>
2 # SPDX-License-Identifier: Apache-2.0
7 The Atmel Two-wire Master Interface (TWIM) interconnects components on a
8 unique two-wire bus, made up of one clock line and one data line with speeds
9 of up to 3.4 Mbit/s, based on a byte-oriented transfer format. The TWIM is
20 std-clk-slew-lim = <0>;
21 std-clk-strength-low = "0.5";
22 std-data-slew-lim = <0>;
23 std-data-strength-low = "0.5";
25 hs-clk-slew-lim = <0>;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/mm_swiftio/ |
| D | mm_swiftio.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
10 #include "mm_swiftio-pinctrl.dtsi"
13 model = "MM MM-SWIFTIO board";
28 zephyr,shell-uart = &lpuart1;
33 /* Micron MT48LC16M16A2B4-6AIT:G */
39 compatible = "gpio-leds";
61 compatible = "nxp,imx-flexspi-nor";
64 spi-max-frequency = <133000000>;
66 jedec-id = [9d 70 17];
[all …]
|
| /Zephyr-Core-3.5.0/samples/boards/rpi_pico/uart_pio/boards/ |
| D | rpi_pico.overlay | 5 input-enable;
6 bias-pull-up;
16 input-enable;
17 bias-pull-up;
29 pinctrl-0 = <&pio1_uart0_default>;
30 pinctrl-names = "default";
32 compatible = "raspberrypi,pico-uart-pio";
33 current-speed = <115200>;
38 pinctrl-0 = <&pio1_uart1_default>;
39 pinctrl-names = "default";
[all …]
|
| /Zephyr-Core-3.5.0/samples/drivers/misc/grove_display/boards/ |
| D | serpente.overlay | 4 * SPDX-License-Identifier: Apache-2.0
10 zephyr,shell-uart = &sercom0;
15 compatible = "atmel,sam0-uart";
16 current-speed = <115200>;
20 pinctrl-0 = <&sercom0_uart_default>;
21 pinctrl-names = "default";
25 compatible = "atmel,sam0-i2c";
26 clock-frequency = <I2C_BITRATE_FAST>;
27 #address-cells = <1>;
28 #size-cells = <0>;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/96b_stm32_sensor_mez/ |
| D | 96b_stm32_sensor_mez.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
9 #include <st/f4/stm32f446v(c-e)tx-pinctrl.dtsi>
10 #include <zephyr/dt-bindings/input/input-event-codes.h>
14 compatible = "st,stm32f446-b96b-f446ve";
18 zephyr,shell-uart = &uart4;
24 compatible = "gpio-leds";
40 compatible = "gpio-keys";
61 clock-frequency = <DT_FREQ_M(16)>;
66 div-m = <8>;
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/atsamc21n_xpro/ |
| D | atsamc21n_xpro.dts | 4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
11 #include "atsamc21n_xpro-pinctrl.dtsi"
12 #include <zephyr/dt-bindings/input/input-event-codes.h>
20 zephyr,shell-uart = &sercom4;
29 pwm-led0 = &pwm_led0;
31 i2c-0 = &sercom1;
35 compatible = "gpio-leds";
43 compatible = "pwm-leds";
50 compatible = "gpio-keys";
[all …]
|
| /Zephyr-Core-3.5.0/subsys/bluetooth/audio/ |
| D | mpl_internal.h | 5 * Copyright (c) 2019 - 2021 Nordic Semiconductor ASA
7 * SPDX-License-Identifier: Apache-2.0
18 /* current segment/track instead to previous */
22 * The media control specification has a requirement that the speed factor
23 * shall be [-64, -4], 0, [4, 64]. I.e., values between 0 and +/- 4 are not allowed.
24 * Set this equal to the minimum speed factor, to ensure only valid speed factors
97 /* For IOP testing - set current group to be it's own parent */
121 /* Trigger playback speed changed callback */
124 /* Trigger seeking speed changed callback */
127 /* Trigger current track id changed callback */
[all …]
|
| /Zephyr-Core-3.5.0/boards/arm/olimex_stm32_h407/ |
| D | olimex_stm32_h407.dts | 2 * Copyright (c) 2018, Reto Schneider <code@reto-schneider.ch>
4 * SPDX-License-Identifier: Apache-2.0
7 /dts-v1/;
9 #include <st/f4/stm32f407z(e-g)tx-pinctrl.dtsi>
10 #include <zephyr/dt-bindings/input/input-event-codes.h>
13 model = "Olimex STM32-H407 board";
14 compatible = "olimex,stm32-h407";
18 zephyr,shell-uart = &usart2;
25 compatible = "gpio-leds";
33 compatible = "gpio-keys";
[all …]
|
12345678910>>...31
