| /Zephyr-Core-3.5.0/dts/bindings/pinctrl/ |
| D | renesas,rcar-pfc.yaml | 9 node to route CAN0 TX A to pin 'RD', and enable pull-up resistor as well
29 /* configuration for can0 data a tx default state */
34 /* configuration for can0 data a rx default state */
60 &can0 {
|
| D | gd,gd32-pinctrl-afio.yaml | 94 /* CAN0 pins are remapped choosing the full remap option */
|
| D | xlnx,pinctrl-zynq.yaml | 139 "smc0_nor", "smc0_nor_cs1", "smc0_nor_addr25", "smc0_nand", "can0",
|
| /Zephyr-Core-3.5.0/boards/arm/rcar_h3ulcb/ |
| D | rcar_h3ulcb_cr7.dts | 21 zephyr,canbus = &can0;
62 &can0 {
|
| /Zephyr-Core-3.5.0/boards/arm/rcar_h3_salvatorx/ |
| D | rcar_h3_salvatorx_cr7.dts | 21 zephyr,canbus = &can0;
74 &can0 {
|
| /Zephyr-Core-3.5.0/boards/x86/qemu_x86/ |
| D | qemu_x86.dts | 46 zephyr,canbus = &can0;
55 can0: can0 { label
|
| /Zephyr-Core-3.5.0/dts/bindings/can/ |
| D | can-controller.yaml | 63 &can0 {
74 &can0 {
|
| D | zephyr,native-posix-linux-can.yaml | 14 description: Linux host interface name (e.g. zcan0, vcan0, can0, ...)
|
| /Zephyr-Core-3.5.0/include/zephyr/devicetree/ |
| D | can.h | 40 * can0: can@... {
55 * DT_CAN_TRANSCEIVER_MAX_BITRATE(DT_NODELABEL(can0), 5000000) // 1000000
|
| /Zephyr-Core-3.5.0/boards/arm/s32z270dc2_r52/ |
| D | s32z270dc2_rtu0_r52.dts | 18 zephyr,canbus = &can0;
|
| D | s32z270dc2_rtu1_r52.dts | 20 zephyr,canbus = &can0;
|
| D | s32z270dc2_r52.dtsi | 34 &can0 {
|
| /Zephyr-Core-3.5.0/dts/arm/renesas/rcar/gen3/ |
| D | r8a77951.dtsi | 18 can0: can@e6c30000 { label
|
| D | rcar_gen3_cr7.dtsi | 91 can0: can@e6c30000 { label
|
| /Zephyr-Core-3.5.0/boards/arm/atsamc21n_xpro/ |
| D | atsamc21n_xpro.dts | 23 zephyr,canbus = &can0;
159 &can0 {
|
| /Zephyr-Core-3.5.0/boards/arm/sam_e70_xplained/ |
| D | sam_e70_xplained-common.dtsi | 28 zephyr,canbus = &can0;
203 &can0 {
|
| /Zephyr-Core-3.5.0/boards/arm/lpcxpresso55s06/ |
| D | lpcxpresso55s06_common.dtsi | 21 zephyr,canbus = &can0;
149 &can0 {
|
| /Zephyr-Core-3.5.0/boards/arm/atsamc21n_xpro/doc/ |
| D | index.rst | 96 - CAN0 TX : PA24
97 - CAN0 RX : PA25
|
| /Zephyr-Core-3.5.0/boards/arm/lpcxpresso55s36/ |
| D | lpcxpresso55s36.dts | 23 zephyr,canbus = &can0;
128 &can0 {
|
| D | lpcxpresso55s36-pinctrl.dtsi | 59 /* Configures pins for CAN0 */
|
| /Zephyr-Core-3.5.0/dts/arm/atmel/ |
| D | samc21.dtsi | 47 can0: can@42001c00 { label
|
| /Zephyr-Core-3.5.0/boards/arm/lpcxpresso55s16/ |
| D | lpcxpresso55s16_common.dtsi | 18 zephyr,canbus = &can0;
146 &can0 {
|
| /Zephyr-Core-3.5.0/samples/modules/canopennode/ |
| D | README.rst | 140 channel = can0
152 sudo ip link set can0 type can bitrate 125000 restart-ms 100
153 sudo ip link set up can0
162 candump can0
|
| /Zephyr-Core-3.5.0/boards/posix/native_posix/ |
| D | native_posix.dts | 196 can0: can { label
|
| /Zephyr-Core-3.5.0/doc/hardware/porting/ |
| D | board_porting.rst | 275 can0: can@40024000 {
291 &can0 {
296 The ``&can0 { ... };`` syntax adds/overrides properties on the node with label
297 ``can0``, i.e. the ``can@4002400`` node defined in the :file:`.dtsi` file.
|
