Searched full:anomaly (Results 1 – 18 of 18) sorted by relevance
78 int "Anomaly 132 workaround delay (microseconds)"83 Due to Anomaly 132 LF RC source may not start if restarted in certain87 that anomaly conditions are not met. Delay should be long enough to ensure96 bool "Anomaly 198 workaround"101 This anomaly applies to IC revisions "Engineering B" up to "3", the most105 bool "Anomaly 109 workaround"110 Due to Anomaly 109 the first byte sent out by these peripherals is113 This anomaly applies to IC revisions up to "3", the most recent one.116 int "Anomaly 109 workaround EGU instance"121 EGU instance used by the nRF52 Anomaly 109 workaround for PWM.
44 bool "Workaround for nRF5340 anomaly 160"49 Indicates that the workaround for the anomaly 160 that affects64 bool "Workaround for nRF5340 anomaly 168"67 Indicates that the workaround for the anomaly 168 that affects77 Indicates that the anomaly 168 workaround is to be extended to cover83 bool "Pre-tick workaround for nRF5340 anomaly 165"89 Indicates that the pre-tick workaround for the anomaly 165 that affects
12 Your application may be affected by the anomaly 160 that concerns the
374 LOG_DBG("Anomaly 160 trigger conditions detected."); in z_arm_on_enter_cpu_idle()
11 anomaly-58-workaround:14 Enables the workaround for the nRF52832 SoC SPIM PAN 58 anomaly.
75 Product Anomaly Notice 58 (SPIM: An additional byte is81 'anomaly-58-workaround' a workaround can be enabled per SPIM85 enabling 'anomaly-58-workaround' via the Devicetree.
33 /* MEC172x QMSPI controller SPI Mode 3 signalling has an anomaly where237 * There is an anomaly in MEC172x for SPI signalling mode 3. We must603 * 5. Hardware anomaly work-around: Poll with timeout QMSPI Local-DMA
37 #error This driver is not available by default for nRF52832 because of Product Anomaly 58 \310 * the nRF52832 Rev 1 Errata v1.6 document anomaly 58 workaround.
70 # nRF70 QSPI doesn't use 192MHz clock and most samples use 128MHz, this can cause anomaly 159
616 * @brief NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround626 * @brief NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE - EGU instance used by the nRF52 Anomaly 109969 * @brief NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for1048 * @brief NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround1325 * @brief NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for
475 * :github:`6235` - echo server crash from ICMPv6 NS source link layer address anomaly493 * :github:`6382` - echo server: crash from unsolicited RA reachable time anomaly
275 * ``ZEP-2306`` - echo server hangs from IPv6 hop-by-hop option anomaly
1983 * :github:`32118` - drivers/flash/soc_flash_nrf: nRF anomaly 242 workaround is not implemented
92 /* If anomaly 159 is to be prevented, only /1 divider can be used. */356 LOG_ERR("nRF5340 anomaly 159 conditions detected"); in qspi_get_zephyr_ret_code()
592 /* Check needed due to anomaly 201: in clock_event_handler()
104 /* If anomaly 159 is to be prevented, only /1 divider can be used. */247 LOG_ERR("nRF5340 anomaly 159 conditions detected"); in qspi_get_zephyr_ret_code()
142 anomoly||anomaly
55 /* Anomaly 211 - Device remains in SUSPEND too long when host resumes
