Home
last modified time | relevance | path

Searched full:camera (Results 1 – 25 of 121) sorted by relevance

12345

/Zephyr-latest/samples/drivers/video/capture/
DREADME.rst16 This sample needs a video capture device (e.g. a camera) but it is not mandatory.
17 Supported camera modules on some i.MX RT boards can be found below.
19 - `Camera iMXRT`_
22 - `MT9M114 camera module`_
25 - `OV5640 camera module`_
33 On :zephyr:board:`mimxrt1064_evk`, the MT9M114 camera module should be plugged in the
34 J35 camera connector. A USB cable should be connected from a host to the micro
37 On :zephyr:board:`mimxrt1170_evk`, the OV5640 camera module should be plugged into the
38 J2 camera connector. A USB cable should be connected from a host to the micro
112 .. _Camera iMXRT: https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Connecting-camera-and-LCD-to-…
[all …]
/Zephyr-latest/boards/arduino/nicla_vision/
Dcamera_ext_clock.c21 LOG_ERR("Camera external clock source device is not ready!"); in camera_ext_clock_enable()
27 LOG_ERR("Failed to enable camera external clock error: (%d)", ret); in camera_ext_clock_enable()
33 LOG_ERR("Failed to get camera external clock rate, error: (%d)", ret); in camera_ext_clock_enable()
37 LOG_INF("Camera external clock rate: (%u) Hz", rate); in camera_ext_clock_enable()
/Zephyr-latest/samples/drivers/video/tcpserversink/
DREADME.rst19 - `MT9M114 camera module`_
24 On :zephyr:board:`mimxrt1064_evk`, The MT9M114 camera module should be plugged in the
25 J35 camera connector. A USB cable should be connected from a host to the micro
33 If a mt9m114 camera shield is missing, video software generator will be used instead.
69 .. _MT9M114 camera module: https://www.onsemi.com/PowerSolutions/product.do?id=MT9M114
/Zephyr-latest/dts/bindings/gpio/
Dweact,dcmi-camera-connector.yaml4 GPIO pins exposed on the DCMI camera connector used for interfacing
5 with the OV2640, OV7670, and OV5640 camera sensors.
22 compatible: "weact,dcmi-camera-connector"
Dnxp,cam-44pins-connector.yaml5 GPIO pins exposed on NXP 44-pin board-to-board camera connector.
/Zephyr-latest/dts/bindings/video/
Despressif,esp32-cam.yaml17 description: Connected source device, i.e. camera sensor
21 description: Camera input data width. 8/16 bits
50 description: camera clock frequency
/Zephyr-latest/samples/drivers/video/capture/boards/
Dfrdm_mcxn947_cpu0.conf3 # Workaround for issue where SDMA driver needs to start before camera, so that
4 # clock output will be generated for camera device
Dfrdm_mcxn947_cpu0.overlay9 zephyr,camera = &video_sdma;
/Zephyr-latest/drivers/video/
DKconfig.stm32_dcmi9 bool "STM32 Digital camera interface (DCMI) driver"
19 Enable driver for STM32 Digital camera interface periheral.
DKconfig.sw_generator6 DT_CHOSEN_ZEPHYR_CAMERA := zephyr,camera
Dov7670.c47 /* Resolution settings for camera, based on those present in MCUX SDK */
204 * Note that this table assumes the camera is fed a 6MHz XCLK signal
463 /* Power up camera module */ in ov7670_init()
476 /* Reset camera module */ in ov7670_init()
495 * Read product ID from camera. This camera implements the SCCB, in ov7670_init()
519 /* Reset camera registers */ in ov7670_init()
522 LOG_ERR("Could not reset camera: %d", ret); in ov7670_init()
528 /* Set default camera format (QVGA, YUYV) */ in ov7670_init()
/Zephyr-latest/boards/shields/amg88xx/doc/
Dindex.rst32 - `Adafruit AMG8833 8x8 Thermal Camera Sensor`_
37 :alt: Adafruit AMG8833 8x8 Thermal Camera Sensor
118 For the `Adafruit AMG8833 8x8 Thermal Camera Sensor`_ breakout board you can
122 `Adafruit AMG8833 8x8 Thermal Camera Sensor Pinouts`_ and the pin assignment
167 .. _`Adafruit AMG8833 8x8 Thermal Camera Sensor`: https://learn.adafruit.com/adafruit-amg8833-8x8-t…
168 …. _`Adafruit AMG8833 8x8 Thermal Camera Sensor Pinouts`: https://learn.adafruit.com/adafruit-amg88…
/Zephyr-latest/boards/shields/dvp_fpc24_mt9m114/doc/
Dindex.rst3 DVP FPC-24 MT9M114 Camera Module
9 This shield supports mt9m114 camera modules which use a 24-pin FPC connector and a DVP
10 (Digital Video Port), aka parallel interface. These camera modules are compatible and provided
11 together with the i.MX RT1050, RT1060 and RT1064 EVKs as specified here `Camera iMXRT`_.
13 Pins assignment of the DVP FPC-24 MT9M114 camera module
92 …https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Connecting-camera-and-LCD-to-i-MX-RT-EVKs/ta-p…
/Zephyr-latest/boards/shields/weact_ov2640_cam_module/doc/
Dindex.rst3 WeAct Studio MiniSTM32H7xx OV2640 Camera Sensor
9 The OV2640 camera sensor is designed to interface with the WeAct Studio
10 MiniSTM32H7xx boards, providing camera sensor capabilities. This shield
11 integrates the OV2640 camera module, which is capable of capturing images
16 :alt: OV2640 Camera Sensor
18 More information about the OV2640 camera sensor can be found on the
/Zephyr-latest/include/zephyr/drivers/
Dvideo-controls.h93 * @name Camera class controls IDs
98 /** Amount of optical zoom applied through to the camera optics */
106 * @name Camera Flash class control IDs
/Zephyr-latest/boards/shields/nxp_btb44_ov5640/doc/
Dindex.rst3 NXP BTB-44 OV5640 Camera Module
9 This shield supports ov5640 camera modules which use a 44-pin board-to-board connector and
10 a MIPI CSI or DVP (parallel) interface. These camera modules are made specifically for and
13 More information about this OV5640 camera module can be found at `Camera iMXRT`_.
15 Pins assignment of the NXP board-to-board 44-pin OV5640 camera module
19 | Camera Connector Pin | Function |
134 …https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Connecting-camera-and-LCD-to-i-MX-RT-EVKs/ta-p…
/Zephyr-latest/boards/nxp/mimxrt1160_evk/
Dmimxrt1160_evk_mimxrt1166_cm7.dts42 * This node describes the GPIO pins mapping of the 44-pin camera
43 * connector, J2 on the EVK. This camera interface is supported
45 * is used with an ov5640 camera module available as a Zephyr shield
/Zephyr-latest/boards/shields/dvp_fpc24_mt9m114/
Ddvp_fpc24_mt9m114.overlay9 zephyr,camera = &dvp_fpc24_interface;
/Zephyr-latest/tests/drivers/gpio/gpio_basic_api/boards/
Dgd32f450i_eval.overlay10 /* unplug camera from JP27 and bridge D0-D1 (pins 16 and 15) */
/Zephyr-latest/boards/espressif/esp32s3_eye/doc/
Dindex.rst8 It features a 2-Megapixel camera, an LCD display, and a microphone, which are used for image
16 ESP32-S3-WROOM-1 module, camera, SD card slot, digital microphone, USB port, and function buttons;
45 - Camera
46 …- The camera OV2640 with 2 million pixels has a 66.5° field of view and a maximum resolution of 16…
73 - Power regulator that converts a 3.3 V supply into a 1.5 V output for the camera.
76 - Power regulator that converts a 3.3 V supply into a 2.8 V output for the camera.
/Zephyr-latest/boards/nxp/mimxrt1170_evk/
Dmimxrt1170_evk_mimxrt1176_cm7.dts65 * This node describes the GPIO pins mapping of the 44-pin camera
66 * connector, J2 on the EVK. This camera interface is supported
68 * is used with an ov5640 camera module available as a Zephyr shield
/Zephyr-latest/boards/espressif/esp_wrover_kit/doc/
Dindex.rst137 | Camera Connector | Camera interface, a standard OV7670 camera module. |
190 that hardware is not used, e.g., nothing is plugged into the Camera (JP4) header, then these
223 | JTAG, MicroSD | IO14 | IO27 | Camera |
225 | Camera | IO26 | IO25 | Camera, LCD |
227 | Camera | IO35 | IO34 | Camera |
229 | Camera | IO39 | IO36 | Camera |
231 | JTAG | EN | IO23 | Camera, LCD |
233 | Camera, LCD | IO22 | IO21 | Camera, LCD, MicroSD |
235 | Camera, LCD | IO19 | IO18 | Camera, LCD |
237 | Camera, LCD | IO5 | IO17 | PSRAM |
[all …]
/Zephyr-latest/boards/shields/weact_ov2640_cam_module/
Dweact_ov2640_cam_module.overlay9 zephyr,camera = &zephyr_camera_dvp;
/Zephyr-latest/boards/shields/nxp_btb44_ov5640/
Dnxp_btb44_ov5640.overlay11 zephyr,camera = &nxp_csi;
/Zephyr-latest/samples/sensor/amg88xx/
DREADME.rst5 Get temperature data from an AMG88XX 8x8 thermal camera sensor.

12345