| /Linux-v6.6/Documentation/devicetree/bindings/clock/ti/ |
| D | dpll.txt | 1 Binding for Texas Instruments DPLL clock.
6 register-mapped DPLL with usually two selectable input clocks
12 for the actual DPLL clock.
39 - reg : offsets for the register set for controlling the DPLL.
45 "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
47 "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
54 - DPLL mode setting - defining any one or more of the following overrides
56 - ti,low-power-stop : DPLL supports low power stop mode, gating output
57 - ti,low-power-bypass : DPLL output matches rate of parent bypass clock
58 - ti,lock : DPLL locks in programmed rate
[all …]
|
| D | apll.txt | 11 a subtype of a DPLL [2], although a simplified one at that.
|
| /Linux-v6.6/drivers/gpu/drm/i915/display/ |
| D | intel_dpll.c | 1603 intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS); in i9xx_enable_pll()
1604 intel_de_write(dev_priv, DPLL(pipe), dpll); in i9xx_enable_pll()
1607 intel_de_posting_read(dev_priv, DPLL(pipe)); in i9xx_enable_pll()
1619 intel_de_write(dev_priv, DPLL(pipe), dpll); in i9xx_enable_pll()
1624 intel_de_write(dev_priv, DPLL(pipe), dpll); in i9xx_enable_pll()
1625 intel_de_posting_read(dev_priv, DPLL(pipe)); in i9xx_enable_pll()
1755 intel_de_write(dev_priv, DPLL(pipe), crtc_state->dpll_hw_state.dpll); in _vlv_enable_pll()
1756 intel_de_posting_read(dev_priv, DPLL(pipe)); in _vlv_enable_pll()
1759 if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) in _vlv_enable_pll()
1775 intel_de_write(dev_priv, DPLL(pipe), in vlv_enable_pll()
[all …]
|
| D | intel_dvo.c | 449 dpll[pipe] = intel_de_rmw(dev_priv, DPLL(pipe), 0, DPLL_DVO_2X_MODE); in intel_dvo_init_dev()
455 intel_de_write(dev_priv, DPLL(pipe), dpll[pipe]); in intel_dvo_init_dev()
|
| D | intel_display_power_well.c | 1186 u32 val = intel_de_read(dev_priv, DPLL(pipe)); in vlv_display_power_well_init()
1192 intel_de_write(dev_priv, DPLL(pipe), val); in vlv_display_power_well_init()
1345 (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0) in assert_chv_phy_status()
|
| D | intel_display.c | 370 dpll_reg = DPLL(0); in vlv_wait_port_ready()
374 dpll_reg = DPLL(0); in vlv_wait_port_ready()
2972 tmp = intel_de_read(dev_priv, DPLL(crtc->pipe)); in i9xx_get_pipe_config()
2983 DPLL(crtc->pipe)); in i9xx_get_pipe_config()
7909 intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS); in i830_enable_pipe()
7910 intel_de_write(dev_priv, DPLL(pipe), dpll); in i830_enable_pipe()
7913 intel_de_posting_read(dev_priv, DPLL(pipe)); in i830_enable_pipe()
7921 intel_de_write(dev_priv, DPLL(pipe), dpll); in i830_enable_pipe()
7925 intel_de_write(dev_priv, DPLL(pipe), dpll); in i830_enable_pipe()
7926 intel_de_posting_read(dev_priv, DPLL(pipe)); in i830_enable_pipe()
[all …]
|
| D | intel_pps.c | 122 pll_enabled = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE; in vlv_power_sequencer_kick()
|
| D | intel_display_power.c | 1779 u32 status = intel_de_read(dev_priv, DPLL(PIPE_A)); in chv_phy_control_init()
|
| /Linux-v6.6/include/dt-bindings/clock/ |
| D | xlnx-zynqmp-clk.h | 15 #define DPLL 3 macro
|
| /Linux-v6.6/arch/arm/mach-omap2/ |
| D | sleep24xx.S | 60 mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
|
| /Linux-v6.6/arch/arm/boot/dts/samsung/ |
| D | exynos5422-odroid-core.dtsi | 101 /* derived from 600MHz DPLL */
203 /* derived from 600MHz DPLL */
239 /* derived from 600MHz DPLL */
251 /* derived from 600MHz DPLL */
266 /* derived from 600MHz DPLL */
|
| /Linux-v6.6/Documentation/devicetree/bindings/phy/ |
| D | ti-phy.txt | 10 "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
|
| /Linux-v6.6/Documentation/arch/arm/omap/ |
| D | dss.rst | 32 - Use DSI DPLL to create DSS FCK
301 Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
|
| /Linux-v6.6/drivers/net/wireless/realtek/rtlwifi/rtl8192se/ |
| D | reg.h | 256 #define DPLL 0x034A macro
|
| /Linux-v6.6/arch/arm/boot/dts/rockchip/ |
| D | rk3036.dtsi | 235 * Fix the emac parent clock is DPLL instead of APLL.
|
| /Linux-v6.6/Documentation/networking/device_drivers/hamradio/ |
| D | z8530drv.rst | 308 present at all (BayCom). It feeds back the output of the DPLL
|
| /Linux-v6.6/drivers/gpu/drm/i915/ |
| D | i915_reg.h | 1415 #define DPLL(pipe) _MMIO_PIPE3((pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C) macro
|
