Searched refs:HDMI (Results 1 – 25 of 216) sorted by relevance
123456789
| /Linux-v5.4/Documentation/devicetree/bindings/display/exynos/ |
| D | exynos_hdmi.txt | 23 a) hdmi: Gate of HDMI IP bus clock.
24 b) sclk_hdmi: Gate of HDMI special clock.
26 HDMI clock mux.
27 d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
28 HDMI clock mux.
38 a) hdmi_pclk: Gate of HDMI IP APB bus.
39 b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
40 d) i_tmds_clk: Gate of HDMI TMDS clock.
41 e) i_pixel_clk: Gate of HDMI pixel clock.
42 f) i_spdif_clk: Gate of HDMI SPDIF clock.
[all …]
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/bridge/ |
| D | renesas,dw-hdmi.txt | 1 Renesas Gen3 DWC HDMI TX Encoder
4 The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
7 These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
15 - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
16 - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
17 - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
18 - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
20 HDMI TX
27 - interrupts: HDMI interrupt number
30 - ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
[all …]
|
| D | dw_hdmi.txt | 1 Synopsys DesignWare HDMI TX Encoder
4 This document defines device tree properties for the Synopsys DesignWare HDMI
5 TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding
13 - reg: Memory mapped base address and length of the DWC HDMI TX registers.
19 - interrupts: Reference to the DWC HDMI TX interrupt.
24 - clock-names: The DWC HDMI TX uses the following clocks.
28 - "cec" is the HDMI CEC controller main clock (optional).
30 - ports: The connectivity of the DWC HDMI TX with the rest of the system is
|
| D | sii902x.txt | 1 sii902x HDMI bridge bindings
12 HDMI audio properties:
14 is wired, <1> if the both are wired. HDMI audio is
19 first audio fifo#0 (HDMI channels 1&2), second for fifo#1
20 (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
30 HDMI audio CTS values. This property follows
34 If HDMI audio is configured the sii902x device becomes an I2S
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/imx/ |
| D | hdmi.txt | 1 Freescale i.MX6 DWC HDMI TX Encoder
4 The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
7 These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
16 - interrupts: HDMI interrupt number
19 - ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports,
20 numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer.
22 - gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI
27 - ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
28 or the functionally-reduced I2C master contained in the DWC HDMI. When
|
| /Linux-v5.4/drivers/gpu/drm/bridge/adv7511/ |
| D | Kconfig | 8 Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
11 bool "ADV7511 HDMI Audio driver"
15 Support the ADV7511 HDMI Audio interface. This is used in
16 conjunction with the AV7511 HDMI driver.
24 Support for the Analog Devices ADV7533 DSI to HDMI encoder.
27 bool "ADV7511/33 HDMI CEC driver"
32 When selected the HDMI transmitter will support the CEC feature.
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/mediatek/ |
| D | mediatek,hdmi.txt | 1 Mediatek HDMI Encoder
4 The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
14 - phys: phandle link to the HDMI PHY node.
28 HDMI CEC
31 The HDMI CEC controller handles hotplug detection and CEC communication.
39 HDMI DDC
42 The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
51 HDMI PHY
54 The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
55 output and drives the HDMI pads.
|
| /Linux-v5.4/Documentation/devicetree/bindings/media/ |
| D | tegra-cec.txt | 1 * Tegra HDMI CEC hardware
3 The HDMI CEC module is present in Tegra SoCs and its purpose is to
4 handle communication between HDMI connected devices over the CEC bus.
13 - interrupts : HDMI CEC interrupt number to the CPU.
14 - clocks : from common clock binding: handle to HDMI CEC clock.
17 - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
|
| D | s5p-cec.txt | 1 * Samsung HDMI CEC driver
3 The HDMI CEC module is present is Samsung SoCs and its purpose is to
4 handle communication between HDMI connected devices over the CEC bus.
13 - interrupts : HDMI CEC interrupt number to the CPU.
14 - clocks : from common clock binding: handle to HDMI CEC clock.
18 - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
|
| D | stih-cec.txt | 1 STMicroelectronics STIH4xx HDMI CEC driver
7 - clocks : from common clock binding: handle to HDMI CEC clock
8 - interrupts : HDMI CEC interrupt number to the CPU.
12 - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
|
| /Linux-v5.4/drivers/gpu/drm/rockchip/ |
| D | Kconfig | 40 bool "Rockchip specific extensions for Synopsys DW HDMI"
43 for the Synopsys DesignWare HDMI driver. If you want to
44 enable HDMI on RK3288 or RK3399 based SoC, you should select
51 for the Synopsys DesignWare HDMI driver. If you want to
56 bool "Rockchip specific extensions for Innosilicon HDMI"
59 for the Innosilicon HDMI driver. If you want to enable
60 HDMI on RK3036 based SoC, you should select this option.
83 bool "Rockchip specific extensions for RK3066 HDMI"
87 for the RK3066 HDMI driver. If you want to enable
88 HDMI on RK3066 based SoC, you should select this option.
|
| /Linux-v5.4/Documentation/media/uapi/v4l/ |
| D | ext-ctrls-dv.rst | 19 (Digital Visual Interface), HDMI (:ref:`hdmi`) and DisplayPort
27 hooked up to e.g. HDMI connectors. Even though the subdevice will
54 read-only control is applicable to DVI-D, HDMI and DisplayPort
64 and HDMI devices.
72 is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
78 HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI
81 This control is applicable to HDMI connectors.
89 video interface (ie. :ref:`cea861` for HDMI).
92 standard correctly (unfortunately quite common for HDMI and DVI-D).
96 DVI-A/D, HDMI and DisplayPort connectors.
[all …]
|
| /Linux-v5.4/Documentation/media/uapi/cec/ |
| D | cec-intro.rst | 15 HDMI connectors provide a single pin for use by the Consumer Electronics
17 HDMI cable to communicate. The protocol for CEC version 1.4 is defined
18 in supplements 1 (CEC) and 2 (HEAC or HDMI Ethernet and Audio Return
19 Channel) of the HDMI 1.4a (:ref:`hdmi`) specification and the
21 HDMI 2.0 (:ref:`hdmi2`) specification.
31 In addition, CEC can be implemented in HDMI receivers, transmitters and
32 in USB devices that have an HDMI input and an HDMI output and that
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/rockchip/ |
| D | dw_hdmi-rockchip.txt | 1 Rockchip DWC HDMI TX Encoder
4 The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
7 These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
21 - interrupts: HDMI interrupt number
24 - ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
31 - ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
32 or the functionally-reduced I2C master contained in the DWC HDMI. When
|
| D | rockchip,rk3066-hdmi.txt | 1 Rockchip specific extensions for rk3066 HDMI
10 Phandle to HDMI controller clock, name should be "hclk".
12 HDMI interrupt number.
16 This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
23 Switch the iomux for the HPD/I2C pins to HDMI function.
|
| /Linux-v5.4/Documentation/devicetree/bindings/media/i2c/ |
| D | adv7604.txt | 1 * Analog Devices ADV7604/11/12 video decoder with HDMI receiver
4 HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
5 input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
6 similar to the 7611 but has 2 HDMI inputs.
22 - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
23 detection pins, one per HDMI input. The active flag indicates the GPIO
33 HDMI 0 0, 1
|
| /Linux-v5.4/drivers/gpu/drm/sun4i/ |
| D | Kconfig | 20 tristate "Allwinner A10 HDMI Controller Support"
23 Choose this option if you have an Allwinner SoC with an HDMI
27 bool "Allwinner A10 HDMI CEC Support"
32 Choose this option if you have an Allwinner SoC with an HDMI
56 tristate "Support for Allwinner version of DesignWare HDMI"
61 DesignWare HDMI controller with custom HDMI PHY. If M is
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/ti/ |
| D | ti,dra7-dss.txt | 32 - DSS Submodules: HDMI
55 HDMI
63 - interrupts: the HDMI interrupt line
70 - Video port for HDMI output
72 HDMI Endpoint optional properties:
73 - lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
|
| D | ti,omap5-dss.txt | 21 - DSS Submodules: RFBI, DSI, HDMI
81 HDMI
89 - interrupts: the HDMI interrupt line
96 - Video port for HDMI output
98 HDMI Endpoint optional properties:
99 - lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
|
| /Linux-v5.4/drivers/gpu/drm/omapdrm/displays/ |
| D | Kconfig | 11 tristate "TPD12S015 HDMI ESD protection and level shifter"
13 Driver for TPD12S015, which offers HDMI ESD protection and level
17 tristate "HDMI Connector"
19 Driver for a generic HDMI connector.
|
| /Linux-v5.4/Documentation/devicetree/bindings/display/sunxi/ |
| D | sun4i-drm.txt | 35 HDMI Encoder
38 The HDMI Encoder supports the HDMI video and audio outputs, and does
48 - clocks: phandles to the clocks feeding the HDMI encoder
49 * ahb: the HDMI interface clock
50 * mod: the HDMI module clock
51 * ddc: the HDMI ddc clock (A31 only)
55 - resets: phandle to the reset control for the HDMI encoder (A31 only)
56 - dmas: phandles to the DMA channels used by the HDMI encoder
65 output, usually to an HDMI connector.
67 DWC HDMI TX Encoder
[all …]
|
| /Linux-v5.4/drivers/gpu/drm/bridge/synopsys/ |
| D | Kconfig | 16 Designware HDMI block. This is used in conjunction with
17 the i.MX6 HDMI driver.
26 Designware HDMI block.
35 Designware HDMI block.
|
| /Linux-v5.4/drivers/gpu/drm/omapdrm/dss/ |
| D | Kconfig | 13 select HDMI
63 bool "HDMI support for OMAP4"
67 HDMI support for OMAP4 based SoCs.
70 bool "Enable HDMI CEC support for OMAP4"
75 When selected the HDMI transmitter will support the CEC feature.
78 bool "HDMI support for OMAP5"
82 HDMI Interface for OMAP5 and similar cores. This adds the High
83 Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
|
| /Linux-v5.4/Documentation/gpu/bridge/ |
| D | dw-hdmi.rst | 2 drm/bridge/dw-hdmi Synopsys DesignWare HDMI Controller
5 Synopsys DesignWare HDMI Controller
8 This section covers everything related to the Synopsys DesignWare HDMI
|
| /Linux-v5.4/drivers/gpu/drm/bridge/ |
| D | Kconfig | 26 the HDMI output of an application processor to MyDP
86 tristate "Silicon Image SII8620 HDMI/MHL bridge"
93 Silicon Image SII8620 HDMI/MHL bridge chip driver.
96 tristate "Silicon Image sii902x RGB/HDMI bridge"
105 tristate "Silicon Image SII9234 HDMI/MHL bridge"
110 and starts encapsulation of HDMI signal.
137 tristate "TI TFP410 DVI/HDMI bridge"
141 Texas Instruments TFP410 DVI/HDMI Transmitter driver
|
123456789
