| /Linux-v4.19/drivers/net/ethernet/apm/xgene-v2/ |
| D | mac.c | 33 u32 intf_ctrl, rgmii; in xge_mac_set_speed() local
38 rgmii = xge_rd_csr(pdata, RGMII_REG_0); in xge_mac_set_speed()
49 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed()
56 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed()
63 SET_REG_BIT(&rgmii, CFG_SPEED_125, 1); in xge_mac_set_speed()
72 xge_wr_csr(pdata, RGMII_REG_0, rgmii); in xge_mac_set_speed()
|
| /Linux-v4.19/arch/powerpc/boot/dts/ |
| D | eiger.dts | 278 RGMII0: emac-rgmii@ef600900 {
279 compatible = "ibm,rgmii-460sx", "ibm,rgmii";
284 RGMII1: emac-rgmii@ef600920 {
285 compatible = "ibm,rgmii-460sx", "ibm,rgmii";
320 phy-mode = "rgmii";
322 rgmii-device = <&RGMII0>;
323 rgmii-channel = <0>;
350 phy-mode = "rgmii";
352 rgmii-device = <&RGMII0>;
353 rgmii-channel = <1>;
[all …]
|
| D | klondike.dts | 146 RGMII0: emac-rgmii@400a2000 {
147 compatible = "ibm,rgmii";
179 phy-mode = "rgmii";
183 rgmii-device = <&RGMII0>;
184 rgmii-channel = <0>;
209 phy-mode = "rgmii";
213 rgmii-device = <&RGMII0>;
214 rgmii-channel = <1>;
|
| D | glacier.dts | 315 RGMII0: emac-rgmii@ef601500 {
316 compatible = "ibm,rgmii-460gt", "ibm,rgmii";
321 RGMII1: emac-rgmii@ef601600 {
322 compatible = "ibm,rgmii-460gt", "ibm,rgmii";
357 phy-mode = "rgmii";
359 rgmii-device = <&RGMII0>;
360 rgmii-channel = <0>;
387 phy-mode = "rgmii";
389 rgmii-device = <&RGMII0>;
390 rgmii-channel = <1>;
[all …]
|
| D | obs600.dts | 238 RGMII0: emac-rgmii@ef600b00 {
239 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
266 phy-mode = "rgmii";
268 rgmii-device = <&RGMII0>;
269 rgmii-channel = <0>;
296 phy-mode = "rgmii";
298 rgmii-device = <&RGMII0>;
299 rgmii-channel = <1>;
|
| D | rainier.dts | 252 RGMII0: emac-rgmii@ef601000 {
253 compatible = "ibm,rgmii-440grx", "ibm,rgmii";
277 phy-mode = "rgmii";
281 rgmii-device = <&RGMII0>;
282 rgmii-channel = <0>;
306 phy-mode = "rgmii";
310 rgmii-device = <&RGMII0>;
311 rgmii-channel = <1>;
|
| D | makalu.dts | 204 RGMII0: emac-rgmii@ef600b00 {
205 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
232 phy-mode = "rgmii";
234 rgmii-device = <&RGMII0>;
235 rgmii-channel = <0>;
262 phy-mode = "rgmii";
264 rgmii-device = <&RGMII0>;
265 rgmii-channel = <1>;
|
| D | sequoia.dts | 310 RGMII0: emac-rgmii@ef601000 {
311 compatible = "ibm,rgmii-440epx", "ibm,rgmii";
335 phy-mode = "rgmii";
339 rgmii-device = <&RGMII0>;
340 rgmii-channel = <0>;
364 phy-mode = "rgmii";
368 rgmii-device = <&RGMII0>;
369 rgmii-channel = <1>;
|
| D | taishan.dts | 269 RGMII0: emac-rgmii@40000790 {
270 compatible = "ibm,rgmii";
339 phy-mode = "rgmii";
341 rgmii-device = <&RGMII0>;
342 rgmii-channel = <0>;
363 phy-mode = "rgmii";
365 rgmii-device = <&RGMII0>;
366 rgmii-channel = <1>;
|
| D | haleakala.dts | 203 RGMII0: emac-rgmii@ef600b00 {
204 compatible = "ibm,rgmii-405exr", "ibm,rgmii";
231 phy-mode = "rgmii";
233 rgmii-device = <&RGMII0>;
234 rgmii-channel = <0>;
|
| D | kilauea.dts | 258 RGMII0: emac-rgmii@ef600b00 {
259 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
286 phy-mode = "rgmii";
288 rgmii-device = <&RGMII0>;
289 rgmii-channel = <0>;
316 phy-mode = "rgmii";
318 rgmii-device = <&RGMII0>;
319 rgmii-channel = <1>;
|
| /Linux-v4.19/Documentation/ABI/testing/ |
| D | sysfs-class-net-phydev | 33 rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
|
| /Linux-v4.19/Documentation/devicetree/bindings/net/ |
| D | ibm,emac.txt | 45 Supported values are: "mii", "rmii", "smii", "rgmii",
47 For Axon on CAB, it is "rgmii"
55 - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
57 For Axon: phandle of plb5/plb4/opb/rgmii
58 - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
143 phy-mode = "rgmii";
146 rgmii-device = <&RGMII0>;
147 rgmii-channel = <0>;
199 "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
200 EMAC) and the second is "ibm,rgmii".
[all …]
|
| D | meson-dwmac.txt | 34 When phy-mode is set to "rgmii" then the TX
37 When the phy-mode is set to either "rgmii-id"
38 or "rgmii-txid" the TX clock delay is already
70 phy-mode = "rgmii";
|
| D | anarion-gmac.txt | 8 - phy-mode: Should be "rgmii". Other modes are not currently supported.
24 phy-mode = "rgmii";
|
| D | apm-xgene-mdio.txt | 6 - compatible: Must be "apm,xgene-mdio-rgmii" or "apm,xgene-mdio-xfi"
19 compatible = "apm,xgene-mdio-rgmii";
|
| D | ethernet.txt | 29 * "rgmii" (RX and TX delays are added by the MAC when required)
30 * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
32 * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
34 * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
|
| D | cpsw.txt | 85 phy-mode = "rgmii-txid";
91 phy-mode = "rgmii-txid";
114 phy-mode = "rgmii-txid";
120 phy-mode = "rgmii-txid";
|
| D | ftgmac100.txt | 18 absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
|
| D | xilinx_gmii2rgmii.txt | 18 - compatible : Should be "xlnx,gmii-to-rgmii-1.0"
31 compatible = "xlnx,gmii-to-rgmii-1.0";
|
| /Linux-v4.19/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-zc1751-xm018-dc4.dts | 116 phy-mode = "rgmii-id";
134 phy-mode = "rgmii-id";
140 phy-mode = "rgmii-id";
146 phy-mode = "rgmii-id";
|
| /Linux-v4.19/arch/powerpc/boot/dts/fsl/ |
| D | mvme7100.dts | 43 phy-connection-type = "rgmii-id";
63 phy-connection-type = "rgmii-id";
72 phy-connection-type = "rgmii-id";
81 phy-connection-type = "rgmii-id";
|
| D | sbc8641d.dts | 83 phy-connection-type = "rgmii-id";
108 phy-connection-type = "rgmii-id";
121 phy-connection-type = "rgmii-id";
134 phy-connection-type = "rgmii-id";
|
| /Linux-v4.19/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ |
| D | ucc.txt | 50 i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
51 Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
|
| /Linux-v4.19/drivers/pinctrl/qcom/ |
| D | pinctrl-ipq4019.c | 523 FUNCTION(rgmii),
574 PINGROUP(22, rgmii, i2s_rx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,
576 PINGROUP(23, sdio, rgmii, i2s_rx, NA, NA, NA, NA, NA, NA, NA, NA, NA,
578 PINGROUP(24, sdio, rgmii, i2s_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA,
580 PINGROUP(25, sdio, rgmii, i2s_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA,
582 PINGROUP(26, sdio, rgmii, i2s_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA,
584 PINGROUP(27, sdio, rgmii, i2s_td, NA, NA, NA, NA, NA, NA, NA, NA, NA,
586 PINGROUP(28, sdio, rgmii, i2s_td, NA, NA, NA, NA, NA, NA, NA, NA, NA,
588 PINGROUP(29, sdio, rgmii, i2s_td, NA, NA, NA, NA, NA, NA, NA, NA, NA,
590 PINGROUP(30, sdio, rgmii, audio_pwm, NA, NA, NA, NA, NA, NA, NA, NA,
[all …]
|
