Home
last modified time | relevance | path

Searched +full:vbus +full:- +full:gpios (Results 1 – 25 of 395) sorted by relevance

12345678910>>...16

/Linux-v5.10/Documentation/devicetree/bindings/usb/
Dusb-nop-xceiv.txt4 - compatible: should be usb-nop-xceiv
5 - #phy-cells: Must be 0
8 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
9 /bindings/clock/clock-bindings.txt
10 This property is required if clock-frequency is specified.
12 - clock-names: Should be "main_clk"
14 - clock-frequency: the clock frequency (in Hz) that the PHY clock must
17 - vcc-supply: phandle to the regulator that provides power to the PHY.
19 - reset-gpios: Should specify the GPIO for reset.
21 - vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
[all …]
Dmediatek,musb.txt2 -------------------------------------------
5 - compatible : should be one of:
6 "mediatek,mt2701-musb"
8 followed by "mediatek,mtk-musb"
9 - reg : specifies physical base address and size of
11 - interrupts : interrupt used by musb controller
12 - interrupt-names : must be "mc"
13 - phys : PHY specifier for the OTG phy
14 - dr_mode : should be one of "host", "peripheral" or "otg",
16 - clocks : a list of phandle + clock-specifier pairs, one for
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/phy/
Dbrcm,ns2-drd-phy.txt4 - compatible: brcm,ns2-drd-phy
5 - reg: offset and length of the NS2 PHY related registers.
6 - reg-names
8 icfg - for DRD ICFG configurations
9 rst-ctrl - for DRD IDM reset
10 crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
11 usb2-strap - for port over current polarity reversal
12 - #phy-cells: Must be 0. No args required.
13 - vbus-gpios: vbus gpio binding
14 - id-gpios: id gpio binding
[all …]
Dallwinner,sun5i-a13-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun5i-a13-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU1 registers
[all …]
Dallwinner,sun6i-a31-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun6i-a31-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU1 registers
[all …]
Dallwinner,sun4i-a10-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
19 - allwinner,sun4i-a10-usb-phy
20 - allwinner,sun7i-a20-usb-phy
24 - description: PHY Control registers
[all …]
Dallwinner,sun8i-v3s-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-v3s-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU0 registers
[all …]
Dallwinner,sun8i-a23-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
19 - allwinner,sun8i-a23-usb-phy
20 - allwinner,sun8i-a33-usb-phy
24 - description: PHY Control registers
[all …]
Dallwinner,sun50i-a64-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun50i-a64-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU0 registers
[all …]
Dallwinner,sun50i-h6-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun50i-h6-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU0 registers
[all …]
Dallwinner,sun8i-a83t-usb-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-a83t-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU1 registers
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/extcon/
Dextcon-ptn5150.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
13 PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
21 int-gpios:
33 vbus-gpios:
35 GPIO pin (output) used to control VBUS. If skipped, no such control
39 - compatible
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/connector/
Dusb-connector.yaml1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rob Herring <robh@kernel.org>
20 - enum:
21 - usb-a-connector
22 - usb-b-connector
23 - usb-c-connector
25 - items:
[all …]
/Linux-v5.10/arch/arm/boot/dts/
Dtegra30-apalis-v1.1-eval.dts1 // SPDX-License-Identifier: GPL-2.0 OR MIT
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include "tegra30-apalis-v1.1.dtsi"
9 compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
10 "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
24 stdout-path = "serial0:115200n8";
47 hdmi-supply = <&reg_5v0>;
81 clock-frequency = <400000>;
83 pcie-switch@58 {
[all …]
Dtegra30-apalis-eval.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include "tegra30-apalis.dtsi"
9 compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
23 stdout-path = "serial0:115200n8";
46 hdmi-supply = <&reg_5v0>;
80 clock-frequency = <400000>;
82 pcie-switch@58 {
102 clock-frequency = <400000>;
[all …]
Dtegra124-apalis-v1.2-eval.dts1 // SPDX-License-Identifier: GPL-2.0 OR MIT
3 * Copyright 2016-2018 Toradex AG
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
9 #include "tegra124-apalis-v1.2.dtsi"
13 compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
14 "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
28 stdout-path = "serial0:115200n8";
40 hdmi-supply = <&reg_5v0>;
74 clock-frequency = <400000>;
[all …]
Dtegra124-apalis-eval.dts1 // SPDX-License-Identifier: GPL-2.0 OR X11
3 * Copyright 2016-2019 Toradex AG
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
9 #include "tegra124-apalis.dtsi"
13 compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
27 stdout-path = "serial0:115200n8";
39 hdmi-supply = <&reg_5v0>;
73 clock-frequency = <400000>;
75 pcie-switch@58 {
[all …]
Dsun8i-a83t-cubietruck-plus.dts2 * Copyright 2015 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun8i-a83t.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
52 compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
60 stdout-path = "serial0:115200n8";
63 hdmi-connector {
64 compatible = "hdmi-connector";
[all …]
Dimx7d-meerkat96.dts1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
6 /dts-v1/;
12 compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
15 stdout-path = &uart6;
23 reg_wlreg_on: regulator-wlreg-on {
24 compatible = "regulator-fixed";
25 pinctrl-names = "default";
26 pinctrl-0 = <&pinctrl_wlreg_on>;
27 regulator-name = "wlreg_on";
28 regulator-min-microvolt = <3300000>;
[all …]
Dimx6q-h100.dts4 * This file is dual-licensed: you can use it either under the terms
42 /dts-v1/;
45 #include "imx6qdl-sr-som.dtsi"
46 #include "imx6qdl-sr-som-brcm.dtsi"
64 stdout-path = &uart2;
67 hdmi_osc: hdmi-osc {
68 compatible = "fixed-clock";
69 clock-output-names = "hdmi-osc";
70 clock-frequency = <27000000>;
71 #clock-cells = <0>;
[all …]
Dimx6qdl-aristainetos.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
8 #include <dt-bindings/gpio/gpio.h>
12 reg_2p5v: regulator-2p5v {
13 compatible = "regulator-fixed";
14 regulator-name = "2P5V";
15 regulator-min-microvolt = <2500000>;
16 regulator-max-microvolt = <2500000>;
17 regulator-always-on;
20 reg_3p3v: regulator-3p3v {
21 compatible = "regulator-fixed";
[all …]
/Linux-v5.10/arch/arm64/boot/dts/allwinner/
Dsun50i-h5-nanopi-neo2.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
5 #include "sun50i-h5.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
11 compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
19 stdout-path = "serial0:115200n8";
23 compatible = "gpio-leds";
27 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
28 default-state = "on";
33 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
[all …]
Dsun50i-h5-orangepi-prime.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 // Based on sun50i-h5-orangepi-pc2.dts, which is:
6 /dts-v1/;
7 #include "sun50i-h5.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
14 compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
22 stdout-path = "serial0:115200n8";
26 compatible = "hdmi-connector";
31 remote-endpoint = <&hdmi_out_con>;
[all …]
/Linux-v5.10/arch/mips/boot/dts/ingenic/
Dgcw0.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
5 #include <dt-bindings/clock/ingenic,tcu.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/iio/adc/ingenic,adc.h>
9 #include <dt-bindings/input/input.h>
29 stdout-path = "serial2:57600n8";
33 compatible = "regulator-fixed";
34 regulator-name = "vcc";
36 regulator-min-microvolt = <3300000>;
[all …]
/Linux-v5.10/drivers/extcon/
Dextcon-intel-int3496.c1 // SPDX-License-Identifier: GPL-2.0
14 #include <linux/extcon-provider.h>
49 { "id-gpios", &id_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
50 { "vbus-gpios", &vbus_gpios, 1 },
51 { "mux-gpios", &mux_gpios, 1 },
59 int id = gpiod_get_value_cansleep(data->gpio_usb_id); in int3496_do_usb_id()
62 dev_dbg(data->dev, "Connected %s cable\n", id ? "PERIPHERAL" : "HOST"); in int3496_do_usb_id()
65 * Peripheral: set USB mux to peripheral and disable VBUS in int3496_do_usb_id()
66 * Host: set USB mux to host and enable VBUS in int3496_do_usb_id()
68 if (!IS_ERR(data->gpio_usb_mux)) in int3496_do_usb_id()
[all …]

12345678910>>...16