Lines Matching +full:vbus +full:- +full:gpios

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Chen-Yu Tsai <wens@csie.org>
11   - Maxime Ripard <mripard@kernel.org>
14   "#phy-cells":
18     const: allwinner,sun50i-a64-usb-phy
22       - description: PHY Control registers
23       - description: PHY PMU0 registers
24       - description: PHY PMU1 registers
26   reg-names:
28       - const: phy_ctrl
29       - const: pmu0
30       - const: pmu1
34       - description: USB OTG PHY bus clock
35       - description: USB Host 0 PHY bus clock
37   clock-names:
39       - const: usb0_phy
40       - const: usb1_phy
44       - description: USB OTG reset
45       - description: USB Host 1 Controller reset
47   reset-names:
49       - const: usb0_reset
50       - const: usb1_reset
52   usb0_id_det-gpios:
55   usb0_vbus_det-gpios:
56     description: GPIO to the USB OTG VBUS detect pin
58   usb0_vbus_power-supply:
59     description: Power supply to detect the USB OTG VBUS
61   usb0_vbus-supply:
62     description: Regulator controlling USB OTG VBUS
64   usb1_vbus-supply:
68   - "#phy-cells"
69   - compatible
70   - clocks
71   - clock-names
72   - reg
73   - reg-names
74   - resets
75   - reset-names
80   - |
81     #include <dt-bindings/gpio/gpio.h>
82     #include <dt-bindings/clock/sun50i-a64-ccu.h>
83     #include <dt-bindings/reset/sun50i-a64-ccu.h>
86         #phy-cells = <1>;
87         compatible = "allwinner,sun50i-a64-usb-phy";
91         reg-names = "phy_ctrl",
96         clock-names = "usb0_phy",
100         reset-names = "usb0_reset",
102         usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
103         usb0_vbus_power-supply = <&usb_power_supply>;
104         usb0_vbus-supply = <&reg_drivevbus>;
105         usb1_vbus-supply = <&reg_usb1_vbus>;