Lines Matching +full:vbus +full:- +full:gpios
4 - compatible: should be usb-nop-xceiv
5 - #phy-cells: Must be 0
8 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
9 /bindings/clock/clock-bindings.txt
10 This property is required if clock-frequency is specified.
12 - clock-names: Should be "main_clk"
14 - clock-frequency: the clock frequency (in Hz) that the PHY clock must
17 - vcc-supply: phandle to the regulator that provides power to the PHY.
19 - reset-gpios: Should specify the GPIO for reset.
21 - vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
23 - vbus-regulator : should specifiy the regulator supplying current drawn from
24 the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
29 compatible = "usb-nop-xceiv";
30 clock-frequency = <19200000>;
32 clock-names = "main_clk";
33 vcc-supply = <&hsusb1_vcc_regulator>;
34 reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
35 vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
36 vbus-regulator = <&vbus_regulator>;
37 #phy-cells = <0>;
43 GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.