/Linux-v5.10/arch/arm/boot/dts/ |
D | imx7s.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 6 #include <dt-bindings/clock/imx7d-clock.h> 7 #include <dt-bindings/power/imx7-power.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/reset/imx7-reset.h> 12 #include "imx7d-pinfunc.h" 15 #address-cells = <1>; 16 #size-cells = <1>; [all …]
|
D | imx7d-pico-dwarf.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 /dts-v1/; 10 #include "imx7d-pico.dtsi" 12 model = "TechNexion PICO-IMX7D and DWARF baseboard"; 13 compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d"; 16 compatible = "fsl,imx-audio-sgtl5000"; 17 model = "imx7d-sgtl5000"; 18 audio-cpu = <&sai1>; 19 audio-codec = <&sgtl5000>; 20 audio-routing = [all …]
|
D | imx7d-pico-nymph.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 /dts-v1/; 10 #include "imx7d-pico.dtsi" 12 model = "TechNexion PICO-IMX7 and NYMPH baseboard"; 13 compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d"; 16 compatible = "gpio-leds"; 17 pinctrl-names = "default"; 18 pinctrl-0 = <&pinctrl_gpio_leds>; 21 label = "gpio-led"; 27 compatible = "fsl,imx-audio-sgtl5000"; [all …]
|
D | imx7d.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 7 #include <dt-bindings/reset/imx7-reset.h> 12 clock-frequency = <996000000>; 13 operating-points-v2 = <&cpu0_opp_table>; 14 #cooling-cells = <2>; 15 nvmem-cells = <&fuse_grade>; 16 nvmem-cell-names = "speed_grade"; 20 compatible = "arm,cortex-a7"; 23 clock-frequency = <996000000>; 24 operating-points-v2 = <&cpu0_opp_table>; [all …]
|
D | imx7d-zii-rmu2.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 5 * RMU - Remote Modem Unit 10 /dts-v1/; 11 #include <dt-bindings/thermal/thermal.h> 12 #include "imx7d.dtsi" 16 compatible = "zii,imx7d-rmu2", "fsl,imx7d"; 19 stdout-path = &uart2; 22 gpio-leds { 23 compatible = "gpio-leds"; 24 pinctrl-0 = <&pinctrl_leds_debug>; [all …]
|
D | imx7d-meerkat96.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 6 /dts-v1/; 8 #include "imx7d.dtsi" 12 compatible = "novtech,imx7d-meerkat96", "fsl,imx7d"; 15 stdout-path = &uart6; 23 reg_wlreg_on: regulator-wlreg-on { 24 compatible = "regulator-fixed"; 25 pinctrl-names = "default"; 26 pinctrl-0 = <&pinctrl_wlreg_on>; 27 regulator-name = "wlreg_on"; [all …]
|
D | imx7d-sdb.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 5 /dts-v1/; 7 #include "imx7d.dtsi" 11 compatible = "fsl,imx7d-sdb", "fsl,imx7d"; 14 stdout-path = &uart1; 22 gpio-keys { 23 compatible = "gpio-keys"; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&pinctrl_gpio_keys>; 27 volume-up { [all …]
|
D | imx7d-cl-som-imx7.dts | 2 * Support for CompuLab CL-SOM-iMX7 System-on-Module 4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ 7 * This file is dual-licensed: you can use it either under the terms 13 /dts-v1/; 15 #include "imx7d.dtsi" 18 model = "CompuLab CL-SOM-iMX7"; 19 compatible = "compulab,cl-som-imx7", "fsl,imx7d"; 23 reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ 26 reg_usb_otg1_vbus: regulator-vbus { 27 compatible = "regulator-fixed"; [all …]
|
D | imx7d-nitrogen7.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR X11 6 /dts-v1/; 8 #include "imx7d.dtsi" 12 compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; 19 backlight-j9 { 20 compatible = "gpio-backlight"; 21 pinctrl-names = "default"; 22 pinctrl-0 = <&pinctrl_backlight_j9>; 24 default-on; 27 backlight_lcd: backlight-j20 { [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/iio/adc/ |
D | fsl,imx7d-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Freescale ADC found on the imx7d SoC 10 - Haibo Chen <haibo.chen@nxp.com> 14 const: fsl,imx7d-adc 25 clock-names: 28 vref-supply: true 30 "#io-channel-cells": [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/clock/ |
D | imx7d-clock.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/clock/imx7d-clock.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Clock bindings for Freescale i.MX7 Dual 10 - Frank Li <Frank.Li@nxp.com> 11 - Anson Huang <Anson.Huang@nxp.com> 14 The clock consumer should specify the desired clock by having the clock 15 ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h 16 for the full list of i.MX7 Dual clock IDs. [all …]
|
D | imx8qxp-lpcg.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings 10 - Aisheng Dong <aisheng.dong@nxp.com> 13 The Low-Power Clock Gate (LPCG) modules contain a local programming 14 model to control the clock gates for the peripherals. An LPCG module 17 This level of clock gating is provided after the clocks are generated 18 by the SCU resources and clock controls. Thus even if the clock is [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/pci/ |
D | fsl,imx6q-pcie.txt | 4 and thus inherits all the common properties defined in designware-pcie.txt. 7 - compatible: 8 - "fsl,imx6q-pcie" 9 - "fsl,imx6sx-pcie", 10 - "fsl,imx6qp-pcie" 11 - "fsl,imx7d-pcie" 12 - "fsl,imx8mq-pcie" 13 - reg: base address and length of the PCIe controller 14 - interrupts: A list of interrupt outputs of the controller. Must contain an 15 entry for each entry in the interrupt-names property. [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/remoteproc/ |
D | imx-rproc.txt | 1 NXP iMX6SX/iMX7D Co-Processor Bindings 2 ---------------------------------------- 4 This binding provides support for ARM Cortex M4 Co-processor found on some 8 - compatible Should be one of: 9 "fsl,imx7d-cm4" 10 "fsl,imx6sx-cm4" 11 - clocks Clock for co-processor (See: ../clock/clock-bindings.txt) 12 - syscon Phandle to syscon block which provide access to 16 - memory-region list of phandels to the reserved memory regions. 17 (See: ../reserved-memory/reserved-memory.txt) [all …]
|
/Linux-v5.10/drivers/pci/controller/dwc/ |
D | pci-imx6.c | 1 // SPDX-License-Identifier: GPL-2.0 17 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> 18 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h> 35 #include "pcie-designware.h" 43 #define to_imx6_pcie(x) dev_get_drvdata((x)->dev) 49 IMX7D, enumerator 96 /* PCIe Port Logic registers (memory-mapped) */ 109 /* PHY registers (not memory-mapped) */ 146 struct dw_pcie *pci = imx6_pcie->pci; in pcie_phy_poll_ack() 162 return -ETIMEDOUT; in pcie_phy_poll_ack() [all …]
|
/Linux-v5.10/arch/arm64/boot/dts/freescale/ |
D | imx8mm.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/clock/imx8mm-clock.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/thermal/thermal.h> 12 #include "imx8mm-pinfunc.h" 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
D | imx8mn.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/clock/imx8mn-clock.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/thermal/thermal.h> 12 #include "imx8mn-pinfunc.h" 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
D | imx8mq.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> 7 #include <dt-bindings/clock/imx8mq-clock.h> 8 #include <dt-bindings/power/imx8mq-power.h> 9 #include <dt-bindings/reset/imx8mq-reset.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include "dt-bindings/input/input.h" 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/thermal/thermal.h> 14 #include "imx8mq-pinfunc.h" [all …]
|
D | imx8mp.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/clock/imx8mp-clock.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/thermal/thermal.h> 12 #include "imx8mp-pinfunc.h" 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/media/ |
D | fsl-pxp.txt | 4 The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine 10 - compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28, 11 imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d. 12 - reg: the register base and size for the device registers 13 - interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d. 14 - clock-names: should be "axi" 15 - clocks: the PXP AXI clock 20 compatible = "fsl,imx6ull-pxp"; 24 clock-names = "axi";
|
/Linux-v5.10/Documentation/devicetree/bindings/mtd/ |
D | gpmi-nand.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Freescale General-Purpose Media Interface (GPMI) binding 10 - Han Xu <han.xu@nxp.com> 13 - $ref: "nand-controller.yaml" 17 flash chips. The device tree may optionally contain sub-nodes 24 - enum: 25 - fsl,imx23-gpmi-nand [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/mmc/ |
D | fsl-imx-esdhc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Shawn Guo <shawnguo@kernel.org> 13 - $ref: "mmc-controller.yaml" 20 by mmc.txt and the properties used by the sdhci-esdhc-imx driver. 25 - enum: 26 - fsl,imx25-esdhc 27 - fsl,imx35-esdhc [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/pwm/ |
D | imx-pwm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Philipp Zabel <p.zabel@pengutronix.de> 13 "#pwm-cells": 18 - 2 19 - 3 23 - enum: 24 - fsl,imx1-pwm [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/i2c/ |
D | i2c-imx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX 10 - Wolfram Sang <wolfram@the-dreams.de> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - const: fsl,imx1-i2c 19 - const: fsl,imx21-i2c 20 - const: fsl,vf610-i2c [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/spi/ |
D | fsl-imx-cspi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Shawn Guo <shawnguo@kernel.org> 13 - $ref: "/schemas/spi/spi-controller.yaml#" 18 - const: fsl,imx1-cspi 19 - const: fsl,imx21-cspi 20 - const: fsl,imx27-cspi 21 - const: fsl,imx31-cspi [all …]
|