/Linux-v6.1/Documentation/networking/device_drivers/ethernet/intel/ |
D | iavf.rst | 126 # ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24 127 # ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371 129 Where "24" and "371" are example VLAN IDs. 159 to 1Gbit for tc0 and 3Gbit for tc1. 164 queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit 165 max_rate 1Gbit 3Gbit 181 For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
|
D | i40e.rst | 242 | 31 28 24 20 16 | 15 12 8 4 0 | 479 ip link add link eth0 eth0.24 type vlan proto 802.1ad id 24 480 ip link add link eth0.24 eth0.24.371 type vlan proto 802.1Q id 371 482 Where "24" and "371" are example VLAN IDs. 668 to 1Gbit for tc0 and 3Gbit for tc1. 673 queues 16@0 16@16 hw 1 mode channel shaper bw_rlimit min_rate 1Gbit 2Gbit 674 max_rate 1Gbit 3Gbit 690 For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network
|
/Linux-v6.1/drivers/net/ethernet/aquantia/atlantic/hw_atl2/ |
D | hw_atl2.c | 643 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl2_hw_multicast_list_set() 703 {0xfU, 0xffU}, /* 10Gbit */ in hw_atl2_hw_interrupt_moderation_set() 704 {0xfU, 0x1ffU}, /* 5Gbit */ in hw_atl2_hw_interrupt_moderation_set() 705 {0xfU, 0x1ffU}, /* 5Gbit 5GS */ in hw_atl2_hw_interrupt_moderation_set() 706 {0xfU, 0x1ffU}, /* 2.5Gbit */ in hw_atl2_hw_interrupt_moderation_set() 707 {0xfU, 0x1ffU}, /* 1Gbit */ in hw_atl2_hw_interrupt_moderation_set() 711 {0x6U, 0x38U},/* 10Gbit */ in hw_atl2_hw_interrupt_moderation_set() 712 {0xCU, 0x70U},/* 5Gbit */ in hw_atl2_hw_interrupt_moderation_set() 713 {0xCU, 0x70U},/* 5Gbit 5GS */ in hw_atl2_hw_interrupt_moderation_set() 714 {0x18U, 0xE0U},/* 2.5Gbit */ in hw_atl2_hw_interrupt_moderation_set() [all …]
|
/Linux-v6.1/drivers/net/ethernet/aquantia/atlantic/hw_atl/ |
D | hw_atl_b0.c | 547 l = (mac_addr[2] << 24) | (mac_addr[3] << 16) | in hw_atl_b0_hw_mac_addr_set() 593 * Value 24 in 256byte units in hw_atl_b0_hw_init() 595 aq_hw_write_reg(self, HW_ATL_TX_DMA_TOTAL_REQ_LIMIT_ADR, 24); in hw_atl_b0_hw_init() 689 (buff->len_l2 << 24); in hw_atl_b0_hw_ring_tx_xmit() 1088 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl_b0_hw_multicast_list_set() 1143 {0xfU, 0xffU}, /* 10Gbit */ in hw_atl_b0_hw_interrupt_moderation_set() 1144 {0xfU, 0x1ffU}, /* 5Gbit */ in hw_atl_b0_hw_interrupt_moderation_set() 1145 {0xfU, 0x1ffU}, /* 5Gbit 5GS */ in hw_atl_b0_hw_interrupt_moderation_set() 1146 {0xfU, 0x1ffU}, /* 2.5Gbit */ in hw_atl_b0_hw_interrupt_moderation_set() 1147 {0xfU, 0x1ffU}, /* 1Gbit */ in hw_atl_b0_hw_interrupt_moderation_set() [all …]
|
D | hw_atl_a0.c | 337 l = (mac_addr[2] << 24) | (mac_addr[3] << 16) | in hw_atl_a0_hw_mac_addr_set() 462 (buff->len_l2 << 24) | in hw_atl_a0_hw_ring_tx_xmit() 795 u32 l = (ar_mac[i][2] << 24) | (ar_mac[i][3] << 16) | in hw_atl_a0_hw_multicast_list_set() 838 0x01CU, /* 10Gbit */ in hw_atl_a0_hw_interrupt_moderation_set() 839 0x039U, /* 5Gbit */ in hw_atl_a0_hw_interrupt_moderation_set() 840 0x039U, /* 5Gbit 5GS */ in hw_atl_a0_hw_interrupt_moderation_set() 841 0x073U, /* 2.5Gbit */ in hw_atl_a0_hw_interrupt_moderation_set() 842 0x120U, /* 1Gbit */ in hw_atl_a0_hw_interrupt_moderation_set()
|
/Linux-v6.1/drivers/net/dsa/microchip/ |
D | ksz9477.c | 474 data = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_add() 498 alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_add() 530 data = ((addr[2] << 24) | (addr[3] << 16)); in ksz9477_fdb_del() 599 alu->mac[2] = (alu_table[3] >> 24) & 0xFF; in ksz9477_convert_alu() 674 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); in ksz9477_mdb_add() 753 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); in ksz9477_mdb_del() 888 bool gbit; in ksz9477_get_interface() local 893 gbit = ksz_get_gbit(dev, port); in ksz9477_get_interface() 895 interface = ksz_get_xmii(dev, port, gbit); in ksz9477_get_interface()
|
D | ksz_common.c | 288 [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), 290 [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(24, 20), 296 [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), 322 [STATIC_MAC_FID] = 24, 327 [DYNAMIC_MAC_SRC_PORT] = 24, 377 [DYNAMIC_MAC_ENTRIES] = 24, 379 [DYNAMIC_MAC_TIMESTAMP] = 24, 2531 phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) in ksz_get_xmii() argument 2544 if (gbit) in ksz_get_xmii() 2595 bool gbit = false; in ksz_get_gbit() local [all …]
|
/Linux-v6.1/drivers/net/ethernet/broadcom/ |
D | bgmac.c | 2 * Driver for (BCM4706)? GBit MAC core on BCMA bus. 775 tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; in bgmac_write_mac_address() 825 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ 905 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ 988 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset in bgmac_chip_reset() 1044 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ 1098 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
|
/Linux-v6.1/drivers/hwmon/pmbus/ |
D | pmbus_core.c | 31 #define PMBUS_NAME_SIZE 24 1437 u16 gbit; /* generic status bit */ member 1504 bool upper = !!(attr->gbit & 0xff00); /* need to check STATUS_WORD */ in pmbus_add_sensor_attrs_one() 1529 if (!ret && attr->gbit && in pmbus_add_sensor_attrs_one() 1535 attr->gbit); in pmbus_add_sensor_attrs_one() 1735 .gbit = PB_STATUS_VIN_UV, 1760 .gbit = PB_STATUS_VOUT_OV, 1845 .gbit = PB_STATUS_INPUT, 1856 .gbit = PB_STATUS_IOUT_OC, 1936 .gbit = PB_STATUS_INPUT, [all …]
|
/Linux-v6.1/Documentation/networking/ |
D | dccp.rst | 206 > ip route change 10.0.0.0/24 rto_min 250j dev wlan0 212 with very low RTTs (e.g., loopback, Gbit ethernet).
|
/Linux-v6.1/drivers/scsi/ |
D | scsi_transport_fc.c | 188 #define FC_VPORTSTATE_MAX_NAMELEN 24 251 { FC_PORTSPEED_1GBIT, "1 Gbit" }, 252 { FC_PORTSPEED_2GBIT, "2 Gbit" }, 253 { FC_PORTSPEED_4GBIT, "4 Gbit" }, 254 { FC_PORTSPEED_10GBIT, "10 Gbit" }, 255 { FC_PORTSPEED_8GBIT, "8 Gbit" }, 256 { FC_PORTSPEED_16GBIT, "16 Gbit" }, 257 { FC_PORTSPEED_32GBIT, "32 Gbit" }, 258 { FC_PORTSPEED_20GBIT, "20 Gbit" }, 259 { FC_PORTSPEED_40GBIT, "40 Gbit" }, [all …]
|
/Linux-v6.1/Documentation/admin-guide/nfs/ |
D | nfs-rdma.rst | 17 The NFS/RDMA client was first included in Linux 2.6.24. The NFS/RDMA server 20 In our testing, we have obtained excellent performance results (full 10Gbit
|
/Linux-v6.1/drivers/gpu/drm/ast/ |
D | ast_post.c | 252 ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); in cbrdlli_ast2150() 269 ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); in cbrdlli_ast2150() 629 ast_moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24)); in finetuneDQI_L() 748 ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24)); in finetuneDQSI() 821 ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24)); in cbr_dll2() 1781 /* Check 8Gbit */ in check_dram_size_2500() 1784 reg_14 |= (tRFC >> 24) & 0xFF; in check_dram_size_2500() 1785 /* Check 4Gbit */ in check_dram_size_2500() 1789 /* Check 2Gbit */ in check_dram_size_2500() 1833 /* CLKIN = 24MHz */ in set_mpll_2500() [all …]
|
/Linux-v6.1/drivers/net/ethernet/stmicro/stmmac/ |
D | dwmac-meson8b.c | 69 #define PRG_ETH0_ADJ_SKEW GENMASK(24, 20) 357 * a register) based on the line-speed (125MHz for Gbit speeds, in meson8b_init_prg_eth()
|
/Linux-v6.1/drivers/message/fusion/lsi/ |
D | mpi_cnfg.h | 236 * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. 306 * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID 802 MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */ 1169 U8 MetadataSize; /* 24h */ 1228 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24) 1282 U32 Reserved10; /* 24h */ 1305 U32 Reserved8; /* 24h */ 1327 U32 Reserved7; /* 24h */ 1350 U32 Reserved8; /* 24h */ 1369 U32 Reserved6; /* 24h */ [all …]
|
/Linux-v6.1/drivers/platform/x86/ |
D | apple-gmux.c | 334 * eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s. 654 ver_major = (version >> 24) & 0xff; in gmux_probe() 672 * 2^24 for compatibility with old gmux versions. Cap the max in gmux_probe()
|
/Linux-v6.1/drivers/net/dsa/ |
D | vitesse-vsc73xx-core.c | 305 /* 22-24 are undefined */ 335 /* 21-24 are undefined */ 651 /* Take up the port in 1Gbit mode by default, this will be in vsc73xx_init_port()
|
/Linux-v6.1/include/rdma/ |
D | ib_verbs.h | 843 * base rate of 2.5 Gbit/sec. For example, IB_RATE_5_GBPS will be 844 * converted to 2, since 5 Gbit/sec is 2 * 2.5 Gbit/sec. 901 * mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate 1218 IB_RNR_TIMER_040_96 = 24, 1253 IB_QP_RESERVED4 = (1<<24), 4752 * This function folded the multiplication results of two qpns, 24 bit each,
|
/Linux-v6.1/drivers/scsi/hisi_sas/ |
D | hisi_sas_v3_hw.c | 272 #define CHL_INT1_DMAC_RX_FIFO_ERR_OFF 24 385 #define CMD_HDR_SG_MOD_OFF 24 2728 if (intr_coal_ticks >= BIT(24)) { in intr_coal_ticks_v3_hw_store() 2729 dev_err(dev, "intr_coal_ticks must be less than 2^24!\n"); in intr_coal_ticks_v3_hw_store() 3779 { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" }, 3780 { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" }, 3781 { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" }, 3782 { SAS_LINK_RATE_12_0_GBPS, "12.0 Gbit" },
|
/Linux-v6.1/drivers/net/dsa/realtek/ |
D | rtl8366rb.c | 374 { 0, 24, 2, "EtherOversizeStats" }, 1065 /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ in rtl8366rb_mac_link_up() 1069 dev_err(priv->dev, "failed to force 1Gbit on CPU port\n"); in rtl8366rb_mac_link_up()
|
/Linux-v6.1/drivers/net/ethernet/aeroflex/ |
D | greth.c | 1031 GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | in greth_set_mac_add() 1406 /* Check if we have GBIT capable MAC */ in greth_of_probe() 1480 GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | in greth_of_probe()
|
/Linux-v6.1/drivers/net/ethernet/freescale/ |
D | gianfar.h | 85 #define FBTHR_SHIFT 24 112 * GBIT = 125MHz => 8ns/clock => 8*64 ns / tick 825 u8 gfar_mii_regs[24]; /* See gianfar_phy.h */
|
/Linux-v6.1/drivers/net/ethernet/pasemi/ |
D | pasemi_mac.c | 226 adr0 = dev->dev_addr[2] << 24 | in pasemi_mac_set_mac_addr() 1163 "Defaulting to 1Gbit full duplex\n"); in pasemi_mac_open()
|
/Linux-v6.1/drivers/net/ethernet/packetengines/ |
D | hamachi.c | 115 for these Gbit adapters or you get into an overrun condition really 989 hmp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */ in hamachi_open() 1528 if (pfck>>24 == 0x91 || pfck>>24 == 0x51) { in hamachi_rx()
|
/Linux-v6.1/drivers/net/ethernet/cortina/ |
D | gemini.c | 309 netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n", in gmac_speed_set() 505 .rel_threshold = 24, in gmac_init()
|