/Linux-v5.10/drivers/media/usb/gspca/gl860/ |
D | gl860-ov2640.c | 12 static u8 c61[] = {0x61}; /* expected */ 13 static u8 c51[] = {0x51}; /* expected */ 14 static u8 c50[] = {0x50}; /* expected */ 15 static u8 c28[] = {0x28}; /* expected */ 16 static u8 ca8[] = {0xa8}; /* expected */ 27 {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, 28 {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, 29 {0x0050, 0x0000}, {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0061, 0x0006}, 30 {0x006a, 0x000d}, {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, 31 {0x0041, 0x00c2}, {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, [all …]
|
D | gl860-ov9655.c | 12 {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, 13 {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, 15 {0x0040, 0x0000}, 19 {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, 20 {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2}, 21 {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0040, 0x0000}, 22 {0x00f3, 0x0006}, {0x0058, 0x0000}, {0x0048, 0x0000}, {0x0061, 0x0000}, 93 static u8 c04[] = {0x04}; 104 {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x603c, 0x00ff}, 105 {0x6003, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6001, 0x00ff}, [all …]
|
/Linux-v5.10/arch/x86/kvm/vmx/ |
D | vmx_ops.h | 16 __attribute__((regparm(0))) void vmread_error_trampoline(unsigned long field, 26 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2000, in vmcs_check16() 28 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2001, in vmcs_check16() 30 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x4000, in vmcs_check16() 32 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x6000, in vmcs_check16() 38 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0, in vmcs_check32() 40 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x6000, in vmcs_check32() 46 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0, in vmcs_check64() 48 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2001, in vmcs_check64() 50 BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x4000, in vmcs_check64() [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/pci/ |
D | faraday,ftpci100.txt | 9 The host controller appear on the PCI bus with vendor ID 0x159b (Faraday 10 Technology) and product ID 0x4321. 23 - bus-range: set to <0x00 0xff> 45 - #address-cells: set to <0> 64 interrupt-map-mask = <0xf800 0 0 7>; 66 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ 67 <0x4800 0 0 2 &pci_intc 1>, 68 <0x4800 0 0 3 &pci_intc 2>, 69 <0x4800 0 0 4 &pci_intc 3>, 70 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ [all …]
|
D | v3-v360epc-pci.txt | 18 each be exactly 256MB (0x10000000) in size. 38 reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; 42 bus-range = <0x00 0xff>; 43 ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ 44 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ 45 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ 46 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ 47 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ 48 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ 49 dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ [all …]
|
/Linux-v5.10/sound/soc/qcom/ |
D | lpass-ipq806x.c | 96 return 0; in ipq806x_lpass_exit() 109 return 0; in ipq806x_lpass_free_dma_channel() 113 .i2sctrl_reg_base = 0x0010, 114 .i2sctrl_reg_stride = 0x04, 116 .irq_reg_base = 0x3000, 117 .irq_reg_stride = 0x1000, 119 .rdma_reg_base = 0x6000, 120 .rdma_reg_stride = 0x1000, 122 .wrdma_reg_base = 0xB000, 123 .wrdma_reg_stride = 0x1000, [all …]
|
/Linux-v5.10/include/linux/mfd/wm8350/ |
D | comparator.h | 15 #define WM8350_DIGITISER_CONTROL_1 0x90 16 #define WM8350_DIGITISER_CONTROL_2 0x91 17 #define WM8350_AUX1_READBACK 0x98 18 #define WM8350_AUX2_READBACK 0x99 19 #define WM8350_AUX3_READBACK 0x9A 20 #define WM8350_AUX4_READBACK 0x9B 21 #define WM8350_CHIP_TEMP_READBACK 0x9F 22 #define WM8350_GENERIC_COMPARATOR_CONTROL 0xA3 23 #define WM8350_GENERIC_COMPARATOR_1 0xA4 24 #define WM8350_GENERIC_COMPARATOR_2 0xA5 [all …]
|
/Linux-v5.10/arch/arm/mach-omap2/ |
D | omap24xx.h | 19 #define L4_24XX_BASE 0x48000000 20 #define L4_WK_243X_BASE 0x49000000 21 #define L3_24XX_BASE 0x68000000 24 #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) 25 #define OMAP24XX_IVA_INTC_BASE 0x40000000 28 #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) 29 #define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) 30 #define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) 32 #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) 33 #define OMAP2420_SMS_BASE 0x68008000 [all …]
|
/Linux-v5.10/arch/arm/boot/dts/ |
D | gemini-wbd111.dts | 17 memory@0 { 20 reg = <0x00000000 0x8000000>; 76 #size-cells = <0>; 88 reg = <0x30000000 0x00800000>; 90 partition@0 { 92 reg = <0x00000000 0x00020000>; 97 reg = <0x00020000 0x00100000>; 101 reg = <0x00120000 0x006a0000>; 105 reg = <0x007c0000 0x00010000>; 110 reg = <0x007d0000 0x00010000>; [all …]
|
D | gemini-wbd222.dts | 17 memory@0 { /* 128 MB */ 19 reg = <0x00000000 0x8000000>; 75 #size-cells = <0>; 92 reg = <0x30000000 0x00800000>; 94 partition@0 { 96 reg = <0x00000000 0x00020000>; 101 reg = <0x00020000 0x00100000>; 105 reg = <0x00120000 0x006a0000>; 109 reg = <0x007c0000 0x00010000>; 114 reg = <0x007d0000 0x00010000>; [all …]
|
D | gemini-sq201.dts | 17 memory@0 { /* 128 MB */ 19 reg = <0x00000000 0x8000000>; 62 #size-cells = <0>; 73 #size-cells = <0>; 81 switch@0 { 83 reg = <0>; 91 #size-cells = <0>; 93 port@0 { 94 reg = <0>; 129 pinctrl-0 = <&pflash_default_pins>; [all …]
|
D | gemini-sl93512r.dts | 20 memory@0 { 23 reg = <0x00000000 0x4000000>; 40 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; 77 #size-cells = <0>; 88 #size-cells = <0>; 96 switch@0 { 98 reg = <0>; 106 #size-cells = <0>; 108 port@0 { 109 reg = <0>; [all …]
|
D | integratorap.dts | 17 #size-cells = <0>; 19 cpu@0 { 28 reg = <0>; 37 operating-points = <71000 0 38 66000 0 39 60000 0 40 48000 0 41 36000 0 42 24000 0 43 12000 0>; [all …]
|
/Linux-v5.10/arch/powerpc/boot/dts/ |
D | kuroboxHD.dts | 37 #size-cells = <0>; 41 reg = <0x0>; 44 bus-frequency = <0>; /* Fixed by bootloader */ 46 i-cache-size = <0x4000>; 47 d-cache-size = <0x4000>; 53 reg = <0x0 0x4000000>; 61 store-gathering = <0>; /* 0 == off, !0 == on */ 62 reg = <0x80000000 0x100000>; 63 ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ 64 0xfc000000 0xfc000000 0x100000 /* EUMB */ [all …]
|
D | kuroboxHG.dts | 37 #size-cells = <0>; 41 reg = <0x0>; 44 bus-frequency = <0>; /* Fixed by bootloader */ 46 i-cache-size = <0x4000>; 47 d-cache-size = <0x4000>; 53 reg = <0x0 0x8000000>; 61 store-gathering = <0>; /* 0 == off, !0 == on */ 62 reg = <0x80000000 0x100000>; 63 ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ 64 0xfc000000 0xfc000000 0x100000 /* EUMB */ [all …]
|
D | stx_gp3_8560.dts | 25 #size-cells = <0>; 27 PowerPC,8560@0 { 29 reg = <0>; 34 timebase-frequency = <0>; 35 bus-frequency = <0>; 36 clock-frequency = <0>; 43 reg = <0x00000000 0x10000000>; 50 ranges = <0 0xfdf00000 0x100000>; 51 bus-frequency = <0>; 54 ecm-law@0 { [all …]
|
/Linux-v5.10/drivers/gpu/drm/nouveau/nvkm/subdev/ltc/ |
D | gf100.c | 34 nvkm_wr32(device, 0x17e8cc, start); in gf100_ltc_cbc_clear() 35 nvkm_wr32(device, 0x17e8d0, limit); in gf100_ltc_cbc_clear() 36 nvkm_wr32(device, 0x17e8c8, 0x00000004); in gf100_ltc_cbc_clear() 44 for (c = 0; c < ltc->ltc_nr; c++) { in gf100_ltc_cbc_wait() 45 for (s = 0; s < ltc->lts_nr; s++) { in gf100_ltc_cbc_wait() 46 const u32 addr = 0x1410c8 + (c * 0x2000) + (s * 0x400); in gf100_ltc_cbc_wait() 59 nvkm_mask(device, 0x17ea44, 0x0000000f, i); in gf100_ltc_zbc_clear_color() 60 nvkm_wr32(device, 0x17ea48, color[0]); in gf100_ltc_zbc_clear_color() 61 nvkm_wr32(device, 0x17ea4c, color[1]); in gf100_ltc_zbc_clear_color() 62 nvkm_wr32(device, 0x17ea50, color[2]); in gf100_ltc_zbc_clear_color() [all …]
|
/Linux-v5.10/drivers/net/dsa/mv88e6xxx/ |
D | global2.h | 16 /* Offset 0x00: Interrupt Source Register */ 17 #define MV88E6XXX_G2_INT_SRC 0x00 18 #define MV88E6XXX_G2_INT_SRC_WDOG 0x8000 19 #define MV88E6XXX_G2_INT_SRC_JAM_LIMIT 0x4000 20 #define MV88E6XXX_G2_INT_SRC_DUPLEX_MISMATCH 0x2000 21 #define MV88E6XXX_G2_INT_SRC_WAKE_EVENT 0x1000 22 #define MV88E6352_G2_INT_SRC_SERDES 0x0800 23 #define MV88E6352_G2_INT_SRC_PHY 0x001f 24 #define MV88E6390_G2_INT_SRC_PHY 0x07fe 28 /* Offset 0x01: Interrupt Mask Register */ [all …]
|
/Linux-v5.10/arch/m68k/ifpsp060/ |
D | fskeleton.S | 81 move.w #0x6000,0x2(%sp) 100 move.w #0x6000,0x2(%sp) 119 move.w #0x6000,0x2(%sp) 138 move.w #0x6000,0x2(%sp) 157 move.w #0x6000,0x2(%sp) 176 move.w #0x6000,0x2(%sp) 197 andi.b #0xfe,(%sp) 234 .long 0x4E7A0808 |movec pcr,%d0 235 bclr #0x1,%d0 236 .long 0x4E7B0808 |movec %d0,pcr [all …]
|
/Linux-v5.10/arch/arm/mach-ux500/ |
D | db8500-regs.h | 10 #define U8500_ESRAM_BASE 0x40000000 11 #define U8500_ESRAM_BANK_SIZE 0x00020000 21 #define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 28 #define U8500_PER3_BASE 0x80000000 29 #define U8500_STM_BASE 0x80100000 30 #define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) 31 #define U8500_PER2_BASE 0x80110000 32 #define U8500_PER1_BASE 0x80120000 33 #define U8500_B2R2_BASE 0x80130000 34 #define U8500_HSEM_BASE 0x80140000 [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/net/ |
D | nixge.txt | 27 reg = <0x40000000 0x4000 28 0x41002000 0x2000>; 34 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; 52 reg = <0x40000000 0x6000>; 57 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; 68 reg = <0x40000000 0x6000>; 73 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
|
/Linux-v5.10/arch/powerpc/boot/dts/fsl/ |
D | mpc8548cds.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x01000000>; 44 partition@0 { 45 reg = <0x0 0x0b00000>; 50 reg = <0x0b00000 0x0400000>; 55 reg = <0x0f00000 0x060000>; 60 reg = <0x0f60000 0x020000>; 66 reg = <0x0f80000 0x080000>; 72 board-control@1,0 { 74 reg = <0x1 0x0 0x1000>; [all …]
|
D | t1024si-post.dtsi | 48 ranges = <0x0 0xf 0xfe140000 0x40000>; 49 reg = <0xf 0xfe140000 0 0x480>; 52 brg-frequency = <0>; 53 bus-frequency = <0>; 60 reg = <0x180000 1000>; 61 interrupts = <74 2 0 0>; 69 #address-cells = <0>; 71 reg = <0x80 0x80>; 72 interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78 77 reg = <0x2000 0x200>; [all …]
|
D | mpc8540ads.dts | 29 #size-cells = <0>; 31 PowerPC,8540@0 { 33 reg = <0x0>; 36 d-cache-size = <0x8000>; // L1, 32K 37 i-cache-size = <0x8000>; // L1, 32K 38 timebase-frequency = <0>; // 33 MHz, from uboot 39 bus-frequency = <0>; // 166 MHz 40 clock-frequency = <0>; // 825 MHz, from uboot 47 reg = <0x0 0x8000000>; // 128M at 0x0 55 ranges = <0x0 0xe0000000 0x100000>; [all …]
|
D | mpc8560ads.dts | 30 #size-cells = <0>; 32 PowerPC,8560@0 { 34 reg = <0x0>; 37 d-cache-size = <0x8000>; // L1, 32K 38 i-cache-size = <0x8000>; // L1, 32K 47 reg = <0x0 0x10000000>; 55 ranges = <0x0 0xe0000000 0x100000>; 58 ecm-law@0 { 60 reg = <0x0 0x1000>; 66 reg = <0x1000 0x1000>; [all …]
|