/Linux-v6.1/Documentation/devicetree/bindings/sound/ |
D | renesas,rz-ssi.yaml | 58 bits[0:9] - Specifies MID/RID value of a SSI channel as below 59 MID/RID value of SSI rx0 = 0x256 60 MID/RID value of SSI tx0 = 0x255 61 MID/RID value of SSI rx1 = 0x25a 62 MID/RID value of SSI tx1 = 0x259 63 MID/RID value of SSI rt2 = 0x25f 64 MID/RID value of SSI rx3 = 0x262 65 MID/RID value of SSI tx3 = 0x261 68 bit[11] - LVL = 0, Detects based on the edge 70 bit[15] - TM = 0, Single transfer mode [all …]
|
/Linux-v6.1/tools/perf/pmu-events/arch/arm64/fujitsu/a64fx/ |
D | pipeline.json | 10 "EventCode": "0x1A0", 16 "EventCode": "0x1A1", 22 "EventCode": "0x1A2", 28 "EventCode": "0x1A3", 34 "EventCode": "0x1A4", 40 "EventCode": "0x1A5", 46 "EventCode": "0x1A6", 52 "EventCode": "0x1B4", 58 "EventCode": "0x1B5", 63 "PublicDescription": "This event counts valid cycles of L1D cache pipeline#0.", [all …]
|
/Linux-v6.1/drivers/net/ethernet/freescale/dpaa2/ |
D | dpni-cmd.h | 13 #define DPNI_VER_MINOR 0 21 #define DPNI_CMDID_OPEN DPNI_CMD(0x801) 22 #define DPNI_CMDID_CLOSE DPNI_CMD(0x800) 23 #define DPNI_CMDID_CREATE DPNI_CMD(0x901) 24 #define DPNI_CMDID_DESTROY DPNI_CMD(0x900) 25 #define DPNI_CMDID_GET_API_VERSION DPNI_CMD(0xa01) 27 #define DPNI_CMDID_ENABLE DPNI_CMD(0x002) 28 #define DPNI_CMDID_DISABLE DPNI_CMD(0x003) 29 #define DPNI_CMDID_GET_ATTR DPNI_CMD(0x004) 30 #define DPNI_CMDID_RESET DPNI_CMD(0x005) [all …]
|
/Linux-v6.1/drivers/gpu/drm/amd/pm/powerplay/inc/ |
D | smu7_ppsmc.h | 30 #define PPSMC_MSG_SetGBDroopSettings ((uint16_t) 0x305) 32 #define PPSMC_SWSTATE_FLAG_DC 0x01 33 #define PPSMC_SWSTATE_FLAG_UVD 0x02 34 #define PPSMC_SWSTATE_FLAG_VCE 0x04 36 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00 37 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01 38 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff 40 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01 41 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02 42 #define PPSMC_SYSTEMFLAG_GDDR5 0x04 [all …]
|
D | tonga_ppsmc.h | 29 #define PPSMC_SWSTATE_FLAG_DC 0x01 30 #define PPSMC_SWSTATE_FLAG_UVD 0x02 31 #define PPSMC_SWSTATE_FLAG_VCE 0x04 32 #define PPSMC_SWSTATE_FLAG_PCIE_X1 0x08 34 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00 35 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01 36 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff 38 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01 39 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02 40 #define PPSMC_SYSTEMFLAG_GDDR5 0x04 [all …]
|
D | fiji_ppsmc.h | 30 #define PPSMC_SWSTATE_FLAG_DC 0x01 31 #define PPSMC_SWSTATE_FLAG_UVD 0x02 32 #define PPSMC_SWSTATE_FLAG_VCE 0x04 34 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00 35 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01 36 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff 38 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01 39 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02 40 #define PPSMC_SYSTEMFLAG_GDDR5 0x04 42 #define PPSMC_SYSTEMFLAG_DISABLE_BABYSTEP 0x08 [all …]
|
/Linux-v6.1/include/dt-bindings/input/ |
D | linux-event-codes.h | 23 #define INPUT_PROP_POINTER 0x00 /* needs a pointer */ 24 #define INPUT_PROP_DIRECT 0x01 /* direct input devices */ 25 #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ 26 #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ 27 #define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ 28 #define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ 29 #define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ 31 #define INPUT_PROP_MAX 0x1f 38 #define EV_SYN 0x00 39 #define EV_KEY 0x01 [all …]
|
/Linux-v6.1/include/uapi/linux/ |
D | input-event-codes.h | 23 #define INPUT_PROP_POINTER 0x00 /* needs a pointer */ 24 #define INPUT_PROP_DIRECT 0x01 /* direct input devices */ 25 #define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ 26 #define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ 27 #define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ 28 #define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ 29 #define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ 31 #define INPUT_PROP_MAX 0x1f 38 #define EV_SYN 0x00 39 #define EV_KEY 0x01 [all …]
|
/Linux-v6.1/sound/drivers/opl4/ |
D | opl4_synth.c | 41 #define MIDI_CTL_RELEASE_TIME 0x48 42 #define MIDI_CTL_ATTACK_TIME 0x49 43 #define MIDI_CTL_DECAY_TIME 0x4b 44 #define MIDI_CTL_VIBRATO_RATE 0x4c 45 #define MIDI_CTL_VIBRATO_DEPTH 0x4d 46 #define MIDI_CTL_VIBRATO_DELAY 0x4e 52 static const s16 snd_opl4_pitch_map[0x600] = { 53 0x000,0x000,0x001,0x001,0x002,0x002,0x003,0x003, 54 0x004,0x004,0x005,0x005,0x006,0x006,0x006,0x007, 55 0x007,0x008,0x008,0x009,0x009,0x00a,0x00a,0x00b, [all …]
|
/Linux-v6.1/drivers/clk/renesas/ |
D | r9a06g032-clocks.c | 28 #define R9A06G032_SYSCTRL_DMAMUX 0xA0 41 uint32_t source : 8; /* source index + 1 (0 == none) */ 92 enum { K_GATE = 0, K_FFC, K_DIV, K_BITSEL, K_DUALGATE }; 95 #define R9A06G032_CLKOUT 0 140 D_DIV(CLKOUT_D1OR2, "clkout_d1or2", CLKOUT, 0, 1, 2), 161 D_GATE(CLK_25_PG4, "clk_25_pg4", CLKOUT_D40, 0x749, 0x74a, 0x74b, 0, 0xae3, 0, 0), 162 D_GATE(CLK_25_PG5, "clk_25_pg5", CLKOUT_D40, 0x74c, 0x74d, 0x74e, 0, 0xae4, 0, 0), 163 D_GATE(CLK_25_PG6, "clk_25_pg6", CLKOUT_D40, 0x74f, 0x750, 0x751, 0, 0xae5, 0, 0), 164 D_GATE(CLK_25_PG7, "clk_25_pg7", CLKOUT_D40, 0x752, 0x753, 0x754, 0, 0xae6, 0, 0), 165 D_GATE(CLK_25_PG8, "clk_25_pg8", CLKOUT_D40, 0x755, 0x756, 0x757, 0, 0xae7, 0, 0), [all …]
|
/Linux-v6.1/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
D | dm.c | 17 0x081, /* 0, -12.0dB */ 18 0x088, /* 1, -11.5dB */ 19 0x090, /* 2, -11.0dB */ 20 0x099, /* 3, -10.5dB */ 21 0x0A2, /* 4, -10.0dB */ 22 0x0AC, /* 5, -9.5dB */ 23 0x0B6, /* 6, -9.0dB */ 24 0x0C0, /* 7, -8.5dB */ 25 0x0CC, /* 8, -8.0dB */ 26 0x0D8, /* 9, -7.5dB */ [all …]
|
/Linux-v6.1/drivers/staging/rtl8723bs/hal/ |
D | odm.c | 13 0x7f8001fe, /* 0, +6.0dB */ 14 0x788001e2, /* 1, +5.5dB */ 15 0x71c001c7, /* 2, +5.0dB */ 16 0x6b8001ae, /* 3, +4.5dB */ 17 0x65400195, /* 4, +4.0dB */ 18 0x5fc0017f, /* 5, +3.5dB */ 19 0x5a400169, /* 6, +3.0dB */ 20 0x55400155, /* 7, +2.5dB */ 21 0x50800142, /* 8, +2.0dB */ 22 0x4c000130, /* 9, +1.5dB */ [all …]
|
/Linux-v6.1/drivers/net/wireless/broadcom/b43/ |
D | phy_n.h | 11 #define B43_NPHY_BBCFG B43_PHY_N(0x001) /* BB config */ 12 #define B43_NPHY_BBCFG_RSTCCA 0x4000 /* Reset CCA */ 13 #define B43_NPHY_BBCFG_RSTRX 0x8000 /* Reset RX */ 14 #define B43_NPHY_CHANNEL B43_PHY_N(0x005) /* Channel */ 15 #define B43_NPHY_TXERR B43_PHY_N(0x007) /* TX error */ 16 #define B43_NPHY_BANDCTL B43_PHY_N(0x009) /* Band control */ 17 #define B43_NPHY_BANDCTL_5GHZ 0x0001 /* Use the 5GHz band */ 18 #define B43_NPHY_4WI_ADDR B43_PHY_N(0x00B) /* Four-wire bus address */ 19 #define B43_NPHY_4WI_DATAHI B43_PHY_N(0x00C) /* Four-wire bus data high */ 20 #define B43_NPHY_4WI_DATALO B43_PHY_N(0x00D) /* Four-wire bus data low */ [all …]
|
/Linux-v6.1/include/drm/display/ |
D | drm_dp.h | 44 #define DP_MSA_MISC_SYNC_CLOCK (1 << 0) 46 #define DP_MSA_MISC_STEREO_NO_3D (0 << 9) 50 #define DP_MSA_MISC_6_BPC (0 << 5) 66 #define DP_MSA_MISC_COLOR_RGB _DP_MSA_MISC_COLOR(0, 0, 0, 0) 67 #define DP_MSA_MISC_COLOR_CEA_RGB _DP_MSA_MISC_COLOR(0, 0, 1, 0) 68 #define DP_MSA_MISC_COLOR_RGB_WIDE_FIXED _DP_MSA_MISC_COLOR(0, 3, 0, 0) 69 #define DP_MSA_MISC_COLOR_RGB_WIDE_FLOAT _DP_MSA_MISC_COLOR(0, 3, 0, 1) 70 #define DP_MSA_MISC_COLOR_Y_ONLY _DP_MSA_MISC_COLOR(1, 0, 0, 0) 71 #define DP_MSA_MISC_COLOR_RAW _DP_MSA_MISC_COLOR(1, 1, 0, 0) 72 #define DP_MSA_MISC_COLOR_YCBCR_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 1, 0) [all …]
|
/Linux-v6.1/drivers/net/wireless/ath/ath9k/ |
D | ar9003_phy.c | 27 #define AR9300_11NA_OFDM_SHIFT 0 38 /* level: 0 1 2 3 4 5 6 7 8 */ 39 { -4, -2, 0, 2, 4, 6, 8, 10, 12 }; /* lvl 0-8, default 2 */ 42 /* level: 0 1 2 3 4 5 6 7 8 */ 43 { -6, -4, -2, 0, 2, 4, 6, 8 }; /* lvl 0-7, default 3 */ 138 * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) 142 * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) 146 * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) 151 u16 bMode, fracMode = 0, aModeRefSel = 0; in ar9003_hw_set_channel() 152 u32 freq, chan_frac, div, channelSel = 0, reg32 = 0; in ar9003_hw_set_channel() [all …]
|
/Linux-v6.1/drivers/net/wireless/realtek/rtw88/ |
D | rtw8821c.c | 49 efuse->lna_type_2g = map->lna_type_2g[0]; in rtw8821c_read_efuse() 50 efuse->lna_type_5g = map->lna_type_5g[0]; in rtw8821c_read_efuse() 52 efuse->country_code[0] = map->country_code[0]; in rtw8821c_read_efuse() 55 efuse->regd = map->rf_board_option & 0x7; in rtw8821c_read_efuse() 56 efuse->thermal_meter[0] = map->thermal_meter; in rtw8821c_read_efuse() 61 for (i = 0; i < 4; i++) in rtw8821c_read_efuse() 65 efuse->txpwr_idx_table[0].pwr_idx_2g = map->txpwr_idx_table[1].pwr_idx_2g; in rtw8821c_read_efuse() 76 return 0; in rtw8821c_read_efuse() 80 0x081, 0x088, 0x090, 0x099, 0x0a2, 0x0ac, 0x0b6, 0x0c0, 0x0cc, 0x0d8, 81 0x0e5, 0x0f2, 0x101, 0x110, 0x120, 0x131, 0x143, 0x156, 0x16a, 0x180, [all …]
|
D | rtw8822b.c | 42 efuse->lna_type_2g = map->lna_type_2g[0]; in rtw8822b_read_efuse() 43 efuse->lna_type_5g = map->lna_type_5g[0]; in rtw8822b_read_efuse() 45 efuse->country_code[0] = map->country_code[0]; in rtw8822b_read_efuse() 48 efuse->regd = map->rf_board_option & 0x7; in rtw8822b_read_efuse() 52 for (i = 0; i < 4; i++) in rtw8822b_read_efuse() 64 return 0; in rtw8822b_read_efuse() 70 rtw_write32_mask(rtwdev, 0x64, BIT(29) | BIT(28), 0x3); in rtw8822b_phy_rfe_init() 71 rtw_write32_mask(rtwdev, 0x4c, BIT(26) | BIT(25), 0x0); in rtw8822b_phy_rfe_init() 72 rtw_write32_mask(rtwdev, 0x40, BIT(2), 0x1); in rtw8822b_phy_rfe_init() 75 rtw_write32_mask(rtwdev, 0x1990, 0x3f, 0x30); in rtw8822b_phy_rfe_init() [all …]
|