1 /*
2 * Copyright 2022 NXP
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #include <errno.h>
8
9 #include <common/debug.h>
10 #include <ddr.h>
11 #include <utils.h>
12
13 #include <errata.h>
14 #include <platform_def.h>
15
16 #ifdef CONFIG_STATIC_DDR
17 #error No static value defined
18 #endif
19
20 static const struct rc_timing rce[] = {
21 {U(1600), U(8), U(8)},
22 {U(1867), U(8), U(8)},
23 {U(2134), U(8), U(9)},
24 {}
25 };
26
27 static const struct board_timing udimm[] = {
28 {U(0x04), rce, U(0x01030508), U(0x090b0d06)},
29 {U(0x1f), rce, U(0x01030508), U(0x090b0d06)},
30 };
31
ddr_board_options(struct ddr_info * priv)32 int ddr_board_options(struct ddr_info *priv)
33 {
34 int ret;
35 struct memctl_opt *popts = &priv->opt;
36
37 if (popts->rdimm != 0) {
38 debug("RDIMM parameters not set.\n");
39 return -EINVAL;
40 }
41
42 ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
43 if (ret != 0) {
44 return ret;
45 }
46
47 popts->addr_hash = 1;
48 popts->cpo_sample = U(0x7b);
49 popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
50 DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
51 popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
52 DDR_CDR2_VREF_TRAIN_EN |
53 DDR_CDR2_VREF_RANGE_2;
54
55 return 0;
56 }
57
init_ddr(void)58 long long init_ddr(void)
59 {
60 int spd_addr[] = { NXP_SPD_EEPROM0 };
61 struct ddr_info info;
62 struct sysinfo sys;
63 long long dram_size;
64
65 zeromem(&sys, sizeof(sys));
66 get_clocks(&sys);
67 debug("platform clock %lu\n", sys.freq_platform);
68 debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
69
70 zeromem(&info, sizeof(struct ddr_info));
71 info.num_ctlrs = NUM_OF_DDRC;
72 info.dimm_on_ctlr = DDRC_NUM_DIMM;
73 info.clk = get_ddr_freq(&sys, 0);
74 info.spd_addr = spd_addr;
75 info.ddr[0] = (void *)NXP_DDR_ADDR;
76
77 dram_size = dram_init(&info);
78
79 if (dram_size < 0) {
80 ERROR("DDR init failed.\n");
81 }
82
83 return dram_size;
84 }
85
