1 /** 2 ****************************************************************************** 3 * @file stm32l0xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L0xx_HAL_CONF_H 37 #define __STM32L0xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 #include "mxconstants.h" 44 /* Exported types ------------------------------------------------------------*/ 45 /* Exported constants --------------------------------------------------------*/ 46 47 /* ########################## Module Selection ############################## */ 48 /** 49 * @brief This is the list of modules to be used in the HAL driver 50 */ 51 52 #define HAL_MODULE_ENABLED 53 #define HAL_ADC_MODULE_ENABLED 54 //#define HAL_COMP_MODULE_ENABLED 55 //#define HAL_CRC_MODULE_ENABLED 56 //#define HAL_CRYP_MODULE_ENABLED 57 //#define HAL_DAC_MODULE_ENABLED 58 //#define HAL_FIREWALL_MODULE_ENABLED 59 //#define HAL_I2S_MODULE_ENABLED 60 //#define HAL_IWDG_MODULE_ENABLED 61 //#define HAL_LCD_MODULE_ENABLED 62 //#define HAL_LPTIM_MODULE_ENABLED 63 //#define HAL_RNG_MODULE_ENABLED 64 #define HAL_RTC_MODULE_ENABLED 65 #define HAL_SPI_MODULE_ENABLED 66 //#define HAL_TIM_MODULE_ENABLED 67 //#define HAL_TSC_MODULE_ENABLED 68 #define HAL_UART_MODULE_ENABLED 69 //#define HAL_USART_MODULE_ENABLED 70 //#define HAL_IRDA_MODULE_ENABLED 71 //#define HAL_SMARTCARD_MODULE_ENABLED 72 //#define HAL_SMBUS_MODULE_ENABLED 73 #define HAL_WWDG_MODULE_ENABLED 74 //#define HAL_PCD_MODULE_ENABLED 75 #define HAL_GPIO_MODULE_ENABLED 76 #define HAL_DMA_MODULE_ENABLED 77 #define HAL_I2C_MODULE_ENABLED 78 #define HAL_RCC_MODULE_ENABLED 79 #define HAL_FLASH_MODULE_ENABLED 80 #define HAL_PWR_MODULE_ENABLED 81 #define HAL_CORTEX_MODULE_ENABLED 82 83 /* ########################## Oscillator Values adaptation ####################*/ 84 /** 85 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 86 * This value is used by the RCC HAL module to compute the system frequency 87 * (when HSE is used as system clock source, directly or through the PLL). 88 */ 89 #if !defined (HSE_VALUE) 90 #define HSE_VALUE ((uint32_t)16000000U) /*!< Value of the External oscillator in Hz */ 91 #endif /* HSE_VALUE */ 92 93 #if !defined (HSE_STARTUP_TIMEOUT) 94 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 95 #endif /* HSE_STARTUP_TIMEOUT */ 96 97 /** 98 * @brief Internal Multiple Speed oscillator (MSI) default value. 99 * This value is the default MSI range value after Reset. 100 */ 101 #if !defined (MSI_VALUE) 102 #define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/ 103 #endif /* MSI_VALUE */ 104 105 /** 106 * @brief Internal High Speed oscillator (HSI) value. 107 * This value is used by the RCC HAL module to compute the system frequency 108 * (when HSI is used as system clock source, directly or through the PLL). 109 */ 110 #if !defined (HSI_VALUE) 111 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 112 #endif /* HSI_VALUE */ 113 114 /** 115 * @brief Internal High Speed oscillator for USB (HSI48) value. 116 */ 117 #if !defined (HSI48_VALUE) 118 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. 119 The real value may vary depending on the variations 120 in voltage and temperature. */ 121 #endif /* HSI48_VALUE */ 122 123 /** 124 * @brief Internal Low Speed oscillator (LSI) value. 125 */ 126 #if !defined (LSI_VALUE) 127 #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ 128 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 129 The real value may vary depending on the variations 130 in voltage and temperature.*/ 131 /** 132 * @brief External Low Speed oscillator (LSE) value. 133 * This value is used by the UART, RTC HAL module to compute the system frequency 134 */ 135 #if !defined (LSE_VALUE) 136 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 137 #endif /* LSE_VALUE */ 138 139 #if !defined (LSE_STARTUP_TIMEOUT) 140 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 141 #endif /* LSE_STARTUP_TIMEOUT */ 142 143 /* Tip: To avoid modifying this file each time you need to use different HSE, 144 === you can define the HSE value in your toolchain compiler preprocessor. */ 145 146 /* ########################### System Configuration ######################### */ 147 /** 148 * @brief This is the HAL system configuration section 149 */ 150 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 151 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 152 #define USE_RTOS 0U 153 #define PREFETCH_ENABLE 1U 154 #define PREREAD_ENABLE 0U 155 #define BUFFER_CACHE_DISABLE 0U 156 157 /* ########################## Assert Selection ############################## */ 158 /** 159 * @brief Uncomment the line below to expanse the "assert_param" macro in the 160 * HAL drivers code 161 */ 162 /* #define USE_FULL_ASSERT 1 */ 163 164 /* Includes ------------------------------------------------------------------*/ 165 /** 166 * @brief Include module's header file 167 */ 168 169 #ifdef HAL_RCC_MODULE_ENABLED 170 #include "stm32l0xx_hal_rcc.h" 171 #endif /* HAL_RCC_MODULE_ENABLED */ 172 173 #ifdef HAL_GPIO_MODULE_ENABLED 174 #include "stm32l0xx_hal_gpio.h" 175 #endif /* HAL_GPIO_MODULE_ENABLED */ 176 177 #ifdef HAL_DMA_MODULE_ENABLED 178 #include "stm32l0xx_hal_dma.h" 179 #endif /* HAL_DMA_MODULE_ENABLED */ 180 181 #ifdef HAL_CORTEX_MODULE_ENABLED 182 #include "stm32l0xx_hal_cortex.h" 183 #endif /* HAL_CORTEX_MODULE_ENABLED */ 184 185 #ifdef HAL_ADC_MODULE_ENABLED 186 #include "stm32l0xx_hal_adc.h" 187 #endif /* HAL_ADC_MODULE_ENABLED */ 188 189 #ifdef HAL_COMP_MODULE_ENABLED 190 #include "stm32l0xx_hal_comp.h" 191 #endif /* HAL_COMP_MODULE_ENABLED */ 192 193 #ifdef HAL_CRC_MODULE_ENABLED 194 #include "stm32l0xx_hal_crc.h" 195 #endif /* HAL_CRC_MODULE_ENABLED */ 196 197 #ifdef HAL_CRYP_MODULE_ENABLED 198 #include "stm32l0xx_hal_cryp.h" 199 #endif /* HAL_CRYP_MODULE_ENABLED */ 200 201 #ifdef HAL_DAC_MODULE_ENABLED 202 #include "stm32l0xx_hal_dac.h" 203 #endif /* HAL_DAC_MODULE_ENABLED */ 204 205 #ifdef HAL_FIREWALL_MODULE_ENABLED 206 #include "stm32l0xx_hal_firewall.h" 207 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 208 209 #ifdef HAL_FLASH_MODULE_ENABLED 210 #include "stm32l0xx_hal_flash.h" 211 #endif /* HAL_FLASH_MODULE_ENABLED */ 212 213 #ifdef HAL_I2C_MODULE_ENABLED 214 #include "stm32l0xx_hal_i2c.h" 215 #endif /* HAL_I2C_MODULE_ENABLED */ 216 217 #ifdef HAL_I2S_MODULE_ENABLED 218 #include "stm32l0xx_hal_i2s.h" 219 #endif /* HAL_I2S_MODULE_ENABLED */ 220 221 #ifdef HAL_IWDG_MODULE_ENABLED 222 #include "stm32l0xx_hal_iwdg.h" 223 #endif /* HAL_IWDG_MODULE_ENABLED */ 224 225 #ifdef HAL_LCD_MODULE_ENABLED 226 #include "stm32l0xx_hal_lcd.h" 227 #endif /* HAL_LCD_MODULE_ENABLED */ 228 229 #ifdef HAL_LPTIM_MODULE_ENABLED 230 #include "stm32l0xx_hal_lptim.h" 231 #endif /* HAL_LPTIM_MODULE_ENABLED */ 232 233 #ifdef HAL_PWR_MODULE_ENABLED 234 #include "stm32l0xx_hal_pwr.h" 235 #endif /* HAL_PWR_MODULE_ENABLED */ 236 237 #ifdef HAL_RNG_MODULE_ENABLED 238 #include "stm32l0xx_hal_rng.h" 239 #endif /* HAL_RNG_MODULE_ENABLED */ 240 241 #ifdef HAL_RTC_MODULE_ENABLED 242 #include "stm32l0xx_hal_rtc.h" 243 244 #endif /* HAL_RTC_MODULE_ENABLED */ 245 246 #ifdef HAL_SPI_MODULE_ENABLED 247 #include "stm32l0xx_hal_spi.h" 248 #endif /* HAL_SPI_MODULE_ENABLED */ 249 250 #ifdef HAL_TIM_MODULE_ENABLED 251 #include "stm32l0xx_hal_tim.h" 252 #endif /* HAL_TIM_MODULE_ENABLED */ 253 254 #ifdef HAL_TSC_MODULE_ENABLED 255 #include "stm32l0xx_hal_tsc.h" 256 #endif /* HAL_TSC_MODULE_ENABLED */ 257 258 #ifdef HAL_UART_MODULE_ENABLED 259 #include "stm32l0xx_hal_uart.h" 260 #endif /* HAL_UART_MODULE_ENABLED */ 261 262 #ifdef HAL_USART_MODULE_ENABLED 263 #include "stm32l0xx_hal_usart.h" 264 #endif /* HAL_USART_MODULE_ENABLED */ 265 266 #ifdef HAL_IRDA_MODULE_ENABLED 267 #include "stm32l0xx_hal_irda.h" 268 #endif /* HAL_IRDA_MODULE_ENABLED */ 269 270 #ifdef HAL_SMARTCARD_MODULE_ENABLED 271 #include "stm32l0xx_hal_smartcard.h" 272 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 273 274 #ifdef HAL_SMBUS_MODULE_ENABLED 275 #include "stm32l0xx_hal_smbus.h" 276 #endif /* HAL_SMBUS_MODULE_ENABLED */ 277 278 #ifdef HAL_WWDG_MODULE_ENABLED 279 #include "stm32l0xx_hal_wwdg.h" 280 #endif /* HAL_WWDG_MODULE_ENABLED */ 281 282 #ifdef HAL_PCD_MODULE_ENABLED 283 #include "stm32l0xx_hal_pcd.h" 284 #endif /* HAL_PCD_MODULE_ENABLED */ 285 286 /* Exported macro ------------------------------------------------------------*/ 287 #ifdef USE_FULL_ASSERT 288 /** 289 * @brief The assert_param macro is used for function's parameters check. 290 * @param expr: If expr is false, it calls assert_failed function 291 * which reports the name of the source file and the source 292 * line number of the call that failed. 293 * If expr is true, it returns no value. 294 * @retval None 295 */ 296 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 297 /* Exported functions ------------------------------------------------------- */ 298 void assert_failed(uint8_t* file, uint32_t line); 299 #else 300 #define assert_param(expr) ((void)0U) 301 #endif /* USE_FULL_ASSERT */ 302 303 #ifdef __cplusplus 304 } 305 #endif 306 307 #endif /* __STM32L0xx_HAL_CONF_H */ 308 309 310 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 311
