1 /** 2 ****************************************************************************** 3 * @file stm32l4xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L4xx_HAL_CONF_H 37 #define __STM32L4xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 #include "mxconstants.h" 44 45 /* Exported types ------------------------------------------------------------*/ 46 /* Exported constants --------------------------------------------------------*/ 47 48 /* ########################## Module Selection ############################## */ 49 /** 50 * @brief This is the list of modules to be used in the HAL driver 51 */ 52 53 #define HAL_MODULE_ENABLED 54 #define HAL_ADC_MODULE_ENABLED 55 /*#define HAL_CRYP_MODULE_ENABLED */ 56 /*#define HAL_CAN_MODULE_ENABLED */ 57 /*#define HAL_COMP_MODULE_ENABLED */ 58 /*#define HAL_CRC_MODULE_ENABLED */ 59 /*#define HAL_CRYP_MODULE_ENABLED */ 60 /*#define HAL_DAC_MODULE_ENABLED */ 61 /*#define HAL_DCMI_MODULE_ENABLED */ 62 /*#define HAL_DMA2D_MODULE_ENABLED */ 63 /*#define HAL_DFSDM_MODULE_ENABLED */ 64 /*#define HAL_DSI_MODULE_ENABLED */ 65 /*#define HAL_FIREWALL_MODULE_ENABLED */ 66 /*#define HAL_GFXMMU_MODULE_ENABLED */ 67 /*#define HAL_HCD_MODULE_ENABLED */ 68 /*#define HAL_HASH_MODULE_ENABLED */ 69 /*#define HAL_I2S_MODULE_ENABLED */ 70 /*#define HAL_IRDA_MODULE_ENABLED */ 71 /*#define HAL_IWDG_MODULE_ENABLED */ 72 /*#define HAL_LTDC_MODULE_ENABLED */ 73 /*#define HAL_LCD_MODULE_ENABLED */ 74 /*#define HAL_LPTIM_MODULE_ENABLED */ 75 /*#define HAL_NAND_MODULE_ENABLED */ 76 /*#define HAL_NOR_MODULE_ENABLED */ 77 /*#define HAL_OPAMP_MODULE_ENABLED */ 78 /*#define HAL_OSPI_MODULE_ENABLED */ 79 /*#define HAL_OSPI_MODULE_ENABLED */ 80 /*#define HAL_PCD_MODULE_ENABLED */ 81 /*#define HAL_QSPI_MODULE_ENABLED */ 82 /*#define HAL_QSPI_MODULE_ENABLED */ 83 /*#define HAL_RNG_MODULE_ENABLED */ 84 #define HAL_RTC_MODULE_ENABLED 85 /*#define HAL_SAI_MODULE_ENABLED */ 86 /*#define HAL_SD_MODULE_ENABLED */ 87 /*#define HAL_SMBUS_MODULE_ENABLED */ 88 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 89 #define HAL_SPI_MODULE_ENABLED 90 /*#define HAL_SRAM_MODULE_ENABLED */ 91 /*#define HAL_SWPMI_MODULE_ENABLED */ 92 /*#define HAL_TIM_MODULE_ENABLED */ 93 /*#define HAL_TSC_MODULE_ENABLED */ 94 #define HAL_UART_MODULE_ENABLED 95 /*#define HAL_USART_MODULE_ENABLED */ 96 #define HAL_WWDG_MODULE_ENABLED 97 /*#define HAL_EXTI_MODULE_ENABLED */ 98 #define HAL_GPIO_MODULE_ENABLED 99 #define HAL_I2C_MODULE_ENABLED 100 #define HAL_DMA_MODULE_ENABLED 101 #define HAL_RCC_MODULE_ENABLED 102 #define HAL_FLASH_MODULE_ENABLED 103 #define HAL_PWR_MODULE_ENABLED 104 #define HAL_CORTEX_MODULE_ENABLED 105 106 /* ########################## Oscillator Values adaptation ####################*/ 107 /** 108 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 109 * This value is used by the RCC HAL module to compute the system frequency 110 * (when HSE is used as system clock source, directly or through the PLL). 111 */ 112 #if !defined (HSE_VALUE) 113 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 114 #endif /* HSE_VALUE */ 115 116 #if !defined (HSE_STARTUP_TIMEOUT) 117 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 118 #endif /* HSE_STARTUP_TIMEOUT */ 119 120 /** 121 * @brief Internal Multiple Speed oscillator (MSI) default value. 122 * This value is the default MSI range value after Reset. 123 */ 124 #if !defined (MSI_VALUE) 125 #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/ 126 #endif /* MSI_VALUE */ 127 /** 128 * @brief Internal High Speed oscillator (HSI) value. 129 * This value is used by the RCC HAL module to compute the system frequency 130 * (when HSI is used as system clock source, directly or through the PLL). 131 */ 132 #if !defined (HSI_VALUE) 133 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 134 #endif /* HSI_VALUE */ 135 136 /** 137 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 138 * This internal oscillator is mainly dedicated to provide a high precision clock to 139 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 140 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 141 * which is subject to manufacturing process variations. 142 */ 143 #if !defined (HSI48_VALUE) 144 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 145 The real value my vary depending on manufacturing process variations.*/ 146 #endif /* HSI48_VALUE */ 147 148 /** 149 * @brief Internal Low Speed oscillator (LSI) value. 150 */ 151 #if !defined (LSI_VALUE) 152 #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ 153 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 154 The real value may vary depending on the variations 155 in voltage and temperature.*/ 156 157 /** 158 * @brief External Low Speed oscillator (LSE) value. 159 * This value is used by the UART, RTC HAL module to compute the system frequency 160 */ 161 #if !defined (LSE_VALUE) 162 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 163 #endif /* LSE_VALUE */ 164 165 #if !defined (LSE_STARTUP_TIMEOUT) 166 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 167 #endif /* HSE_STARTUP_TIMEOUT */ 168 169 /** 170 * @brief External clock source for SAI1 peripheral 171 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 172 * frequency. 173 */ 174 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 175 #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/ 176 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 177 178 /** 179 * @brief External clock source for SAI2 peripheral 180 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 181 * frequency. 182 */ 183 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 184 #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI2 External clock source in Hz*/ 185 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 186 187 /* Tip: To avoid modifying this file each time you need to use different HSE, 188 === you can define the HSE value in your toolchain compiler preprocessor. */ 189 190 /* ########################### System Configuration ######################### */ 191 /** 192 * @brief This is the HAL system configuration section 193 */ 194 195 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 196 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 197 #define USE_RTOS 0U 198 #define PREFETCH_ENABLE 1U 199 #define INSTRUCTION_CACHE_ENABLE 1U 200 #define DATA_CACHE_ENABLE 1U 201 202 /* ########################## Assert Selection ############################## */ 203 /** 204 * @brief Uncomment the line below to expanse the "assert_param" macro in the 205 * HAL drivers code 206 */ 207 /* #define USE_FULL_ASSERT 1U */ 208 209 /* ################## SPI peripheral configuration ########################## */ 210 211 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 212 * Activated: CRC code is present inside driver 213 * Deactivated: CRC code cleaned from driver 214 */ 215 216 #define USE_SPI_CRC 0U 217 218 /* Includes ------------------------------------------------------------------*/ 219 /** 220 * @brief Include module's header file 221 */ 222 223 #ifdef HAL_RCC_MODULE_ENABLED 224 #include "stm32l4xx_hal_rcc.h" 225 #include "stm32l4xx_hal_rcc_ex.h" 226 #endif /* HAL_RCC_MODULE_ENABLED */ 227 228 #ifdef HAL_EXTI_MODULE_ENABLED 229 #include "stm32l4xx_hal_exti.h" 230 #endif /* HAL_EXTI_MODULE_ENABLED */ 231 232 #ifdef HAL_GPIO_MODULE_ENABLED 233 #include "stm32l4xx_hal_gpio.h" 234 #endif /* HAL_GPIO_MODULE_ENABLED */ 235 236 #ifdef HAL_DMA_MODULE_ENABLED 237 #include "stm32l4xx_hal_dma.h" 238 #include "stm32l4xx_hal_dma_ex.h" 239 #endif /* HAL_DMA_MODULE_ENABLED */ 240 241 #ifdef HAL_DFSDM_MODULE_ENABLED 242 #include "stm32l4xx_hal_dfsdm.h" 243 #endif /* HAL_DFSDM_MODULE_ENABLED */ 244 245 #ifdef HAL_CORTEX_MODULE_ENABLED 246 #include "stm32l4xx_hal_cortex.h" 247 #endif /* HAL_CORTEX_MODULE_ENABLED */ 248 249 #ifdef HAL_ADC_MODULE_ENABLED 250 #include "stm32l4xx_hal_adc.h" 251 #endif /* HAL_ADC_MODULE_ENABLED */ 252 253 #ifdef HAL_CAN_MODULE_ENABLED 254 #include "stm32l4xx_hal_can.h" 255 #endif /* HAL_CAN_MODULE_ENABLED */ 256 257 #ifdef HAL_COMP_MODULE_ENABLED 258 #include "stm32l4xx_hal_comp.h" 259 #endif /* HAL_COMP_MODULE_ENABLED */ 260 261 #ifdef HAL_CRC_MODULE_ENABLED 262 #include "stm32l4xx_hal_crc.h" 263 #endif /* HAL_CRC_MODULE_ENABLED */ 264 265 #ifdef HAL_CRYP_MODULE_ENABLED 266 #include "stm32l4xx_hal_cryp.h" 267 #endif /* HAL_CRYP_MODULE_ENABLED */ 268 269 #ifdef HAL_DAC_MODULE_ENABLED 270 #include "stm32l4xx_hal_dac.h" 271 #endif /* HAL_DAC_MODULE_ENABLED */ 272 273 #ifdef HAL_DCMI_MODULE_ENABLED 274 #include "stm32l4xx_hal_dcmi.h" 275 #endif /* HAL_DCMI_MODULE_ENABLED */ 276 277 #ifdef HAL_DMA2D_MODULE_ENABLED 278 #include "stm32l4xx_hal_dma2d.h" 279 #endif /* HAL_DMA2D_MODULE_ENABLED */ 280 281 #ifdef HAL_DSI_MODULE_ENABLED 282 #include "stm32l4xx_hal_dsi.h" 283 #endif /* HAL_DSI_MODULE_ENABLED */ 284 285 #ifdef HAL_FIREWALL_MODULE_ENABLED 286 #include "stm32l4xx_hal_firewall.h" 287 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 288 289 #ifdef HAL_FLASH_MODULE_ENABLED 290 #include "stm32l4xx_hal_flash.h" 291 #endif /* HAL_FLASH_MODULE_ENABLED */ 292 293 #ifdef HAL_HASH_MODULE_ENABLED 294 #include "stm32l4xx_hal_hash.h" 295 #endif /* HAL_HASH_MODULE_ENABLED */ 296 297 #ifdef HAL_SRAM_MODULE_ENABLED 298 #include "stm32l4xx_hal_sram.h" 299 #endif /* HAL_SRAM_MODULE_ENABLED */ 300 301 #ifdef HAL_NOR_MODULE_ENABLED 302 #include "stm32l4xx_hal_nor.h" 303 #endif /* HAL_NOR_MODULE_ENABLED */ 304 305 #ifdef HAL_NAND_MODULE_ENABLED 306 #include "stm32l4xx_hal_nand.h" 307 #endif /* HAL_NAND_MODULE_ENABLED */ 308 309 #ifdef HAL_I2C_MODULE_ENABLED 310 #include "stm32l4xx_hal_i2c.h" 311 #endif /* HAL_I2C_MODULE_ENABLED */ 312 313 #ifdef HAL_IWDG_MODULE_ENABLED 314 #include "stm32l4xx_hal_iwdg.h" 315 #endif /* HAL_IWDG_MODULE_ENABLED */ 316 317 #ifdef HAL_LCD_MODULE_ENABLED 318 #include "stm32l4xx_hal_lcd.h" 319 #endif /* HAL_LCD_MODULE_ENABLED */ 320 321 #ifdef HAL_LPTIM_MODULE_ENABLED 322 #include "stm32l4xx_hal_lptim.h" 323 #endif /* HAL_LPTIM_MODULE_ENABLED */ 324 325 #ifdef HAL_LTDC_MODULE_ENABLED 326 #include "stm32l4xx_hal_ltdc.h" 327 #endif /* HAL_LTDC_MODULE_ENABLED */ 328 329 #ifdef HAL_OPAMP_MODULE_ENABLED 330 #include "stm32l4xx_hal_opamp.h" 331 #endif /* HAL_OPAMP_MODULE_ENABLED */ 332 333 #ifdef HAL_OSPI_MODULE_ENABLED 334 #include "stm32l4xx_hal_ospi.h" 335 #endif /* HAL_OSPI_MODULE_ENABLED */ 336 337 #ifdef HAL_PWR_MODULE_ENABLED 338 #include "stm32l4xx_hal_pwr.h" 339 #endif /* HAL_PWR_MODULE_ENABLED */ 340 341 #ifdef HAL_QSPI_MODULE_ENABLED 342 #include "stm32l4xx_hal_qspi.h" 343 #endif /* HAL_QSPI_MODULE_ENABLED */ 344 345 #ifdef HAL_RNG_MODULE_ENABLED 346 #include "stm32l4xx_hal_rng.h" 347 #endif /* HAL_RNG_MODULE_ENABLED */ 348 349 #ifdef HAL_RTC_MODULE_ENABLED 350 #include "stm32l4xx_hal_rtc.h" 351 #endif /* HAL_RTC_MODULE_ENABLED */ 352 353 #ifdef HAL_SAI_MODULE_ENABLED 354 #include "stm32l4xx_hal_sai.h" 355 #endif /* HAL_SAI_MODULE_ENABLED */ 356 357 #ifdef HAL_SD_MODULE_ENABLED 358 #include "stm32l4xx_hal_sd.h" 359 #endif /* HAL_SD_MODULE_ENABLED */ 360 361 #ifdef HAL_SMBUS_MODULE_ENABLED 362 #include "stm32l4xx_hal_smbus.h" 363 #endif /* HAL_SMBUS_MODULE_ENABLED */ 364 365 #ifdef HAL_SPI_MODULE_ENABLED 366 #include "stm32l4xx_hal_spi.h" 367 #endif /* HAL_SPI_MODULE_ENABLED */ 368 369 #ifdef HAL_SWPMI_MODULE_ENABLED 370 #include "stm32l4xx_hal_swpmi.h" 371 #endif /* HAL_SWPMI_MODULE_ENABLED */ 372 373 #ifdef HAL_TIM_MODULE_ENABLED 374 #include "stm32l4xx_hal_tim.h" 375 #endif /* HAL_TIM_MODULE_ENABLED */ 376 377 #ifdef HAL_TSC_MODULE_ENABLED 378 #include "stm32l4xx_hal_tsc.h" 379 #endif /* HAL_TSC_MODULE_ENABLED */ 380 381 #ifdef HAL_UART_MODULE_ENABLED 382 #include "stm32l4xx_hal_uart.h" 383 #endif /* HAL_UART_MODULE_ENABLED */ 384 385 #ifdef HAL_USART_MODULE_ENABLED 386 #include "stm32l4xx_hal_usart.h" 387 #endif /* HAL_USART_MODULE_ENABLED */ 388 389 #ifdef HAL_IRDA_MODULE_ENABLED 390 #include "stm32l4xx_hal_irda.h" 391 #endif /* HAL_IRDA_MODULE_ENABLED */ 392 393 #ifdef HAL_SMARTCARD_MODULE_ENABLED 394 #include "stm32l4xx_hal_smartcard.h" 395 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 396 397 #ifdef HAL_WWDG_MODULE_ENABLED 398 #include "stm32l4xx_hal_wwdg.h" 399 #endif /* HAL_WWDG_MODULE_ENABLED */ 400 401 #ifdef HAL_PCD_MODULE_ENABLED 402 #include "stm32l4xx_hal_pcd.h" 403 #endif /* HAL_PCD_MODULE_ENABLED */ 404 405 #ifdef HAL_HCD_MODULE_ENABLED 406 #include "stm32l4xx_hal_hcd.h" 407 #endif /* HAL_HCD_MODULE_ENABLED */ 408 409 #ifdef HAL_GFXMMU_MODULE_ENABLED 410 #include "stm32l4xx_hal_gfxmmu.h" 411 #endif /* HAL_GFXMMU_MODULE_ENABLED */ 412 413 /* Exported macro ------------------------------------------------------------*/ 414 #ifdef USE_FULL_ASSERT 415 /** 416 * @brief The assert_param macro is used for function's parameters check. 417 * @param expr: If expr is false, it calls assert_failed function 418 * which reports the name of the source file and the source 419 * line number of the call that failed. 420 * If expr is true, it returns no value. 421 * @retval None 422 */ 423 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 424 /* Exported functions ------------------------------------------------------- */ 425 void assert_failed(uint8_t* file, uint32_t line); 426 #else 427 #define assert_param(expr) ((void)0U) 428 #endif /* USE_FULL_ASSERT */ 429 430 #ifdef __cplusplus 431 } 432 #endif 433 434 #endif /* __STM32L4xx_HAL_CONF_H */ 435 436 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 437