1# hostapd user database for integrated EAP server 2 3# Each line must contain an identity, EAP method(s), and an optional password 4# separated with whitespace (space or tab). The identity and password must be 5# double quoted ("user"). Password can alternatively be stored as 6# NtPasswordHash (16-byte MD4 hash of the unicode presentation of the password 7# in unicode) if it is used for MSCHAP or MSCHAPv2 authentication. This means 8# that the plaintext password does not need to be included in the user file. 9# Password hash is stored as hash:<16-octets of hex data> without quotation 10# marks. 11 12# [2] flag in the end of the line can be used to mark users for tunneled phase 13# 2 authentication (e.g., within EAP-PEAP). In these cases, an anonymous 14# identity can be used in the unencrypted phase 1 and the real user identity 15# is transmitted only within the encrypted tunnel in phase 2. If non-anonymous 16# access is needed, two user entries is needed, one for phase 1 and another 17# with the same username for phase 2. 18# 19# EAP-TLS, EAP-PEAP, EAP-TTLS, EAP-FAST, EAP-SIM, and EAP-AKA do not use 20# password option. 21# EAP-MD5, EAP-MSCHAPV2, EAP-GTC, EAP-PAX, EAP-PSK, and EAP-SAKE require a 22# password. 23# EAP-PEAP, EAP-TTLS, and EAP-FAST require Phase 2 configuration. 24# 25# * can be used as a wildcard to match any user identity. The main purposes for 26# this are to set anonymous phase 1 identity for EAP-PEAP and EAP-TTLS and to 27# avoid having to configure every certificate for EAP-TLS authentication. The 28# first matching entry is selected, so * should be used as the last phase 1 29# user entry. 30# 31# "prefix"* can be used to match the given prefix and anything after this. The 32# main purpose for this is to be able to avoid EAP method negotiation when the 33# method is using known prefix in identities (e.g., EAP-SIM and EAP-AKA). This 34# is only allowed for phase 1 identities. 35# 36# Multiple methods can be configured to make the authenticator try them one by 37# one until the peer accepts one. The method names are separated with a 38# comma (,). 39# 40# [ver=0] and [ver=1] flags after EAP type PEAP can be used to force PEAP 41# version based on the Phase 1 identity. Without this flag, the EAP 42# authenticator advertises the highest supported version and select the version 43# based on the first PEAP packet from the supplicant. 44# 45# EAP-TTLS supports both EAP and non-EAP authentication inside the tunnel. 46# Tunneled EAP methods are configured with standard EAP method name and [2] 47# flag. Non-EAP methods can be enabled by following method names: TTLS-PAP, 48# TTLS-CHAP, TTLS-MSCHAP, TTLS-MSCHAPV2. TTLS-PAP and TTLS-CHAP require a 49# plaintext password while TTLS-MSCHAP and TTLS-MSCHAPV2 can use NT password 50# hash. 51# 52# Arbitrary RADIUS attributes can be added into Access-Accept packets similarly 53# to the way radius_auth_req_attr is used for Access-Request packet in 54# hostapd.conf. For EAP server, this is configured separately for each user 55# entry with radius_accept_attr=<value> line(s) following the main user entry 56# line. 57 58# Phase 1 users 59"user" MD5 "password" 60"test user" MD5 "secret" 61"example user" TLS 62"DOMAIN\user" MSCHAPV2 "password" 63"gtc user" GTC "password" 64"pax user" PAX "unknown" 65"pax.user@example.com" PAX 0123456789abcdef0123456789abcdef 66"psk user" PSK "unknown" 67"psk.user@example.com" PSK 0123456789abcdef0123456789abcdef 68"sake.user@example.com" SAKE 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef 69"ttls" TTLS 70"not anonymous" PEAP 71# Default to EAP-SIM and EAP-AKA based on fixed identity prefixes 72"0"* AKA,TTLS,TLS,PEAP,SIM 73"1"* SIM,TTLS,TLS,PEAP,AKA 74"2"* AKA,TTLS,TLS,PEAP,SIM 75"3"* SIM,TTLS,TLS,PEAP,AKA 76"4"* AKA,TTLS,TLS,PEAP,SIM 77"5"* SIM,TTLS,TLS,PEAP,AKA 78"6"* AKA' 79"7"* AKA' 80"8"* AKA' 81 82# Wildcard for all other identities 83* PEAP,TTLS,TLS,SIM,AKA 84 85# Phase 2 (tunnelled within EAP-PEAP or EAP-TTLS) users 86"t-md5" MD5 "password" [2] 87"DOMAIN\t-mschapv2" MSCHAPV2 "password" [2] 88"t-gtc" GTC "password" [2] 89"not anonymous" MSCHAPV2 "password" [2] 90"user" MD5,GTC,MSCHAPV2 "password" [2] 91"test user" MSCHAPV2 hash:000102030405060708090a0b0c0d0e0f [2] 92"ttls-user" TTLS-PAP,TTLS-CHAP,TTLS-MSCHAP,TTLS-MSCHAPV2 "password" [2] 93 94# Default to EAP-SIM and EAP-AKA based on fixed identity prefixes in phase 2 95"0"* AKA [2] 96"1"* SIM [2] 97"2"* AKA [2] 98"3"* SIM [2] 99"4"* AKA [2] 100"5"* SIM [2] 101"6"* AKA' [2] 102"7"* AKA' [2] 103"8"* AKA' [2] 104
