1 /* 2 * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa 3 * processor CORE configuration 4 * 5 * See <xtensa/config/core.h>, which includes this file, for more details. 6 */ 7 8 /* Xtensa processor core configuration information. 9 10 Customer ID=15837; Build=0xa1536; Copyright (c) 1999-2022 Tensilica Inc. 11 12 Permission is hereby granted, free of charge, to any person obtaining 13 a copy of this software and associated documentation files (the 14 "Software"), to deal in the Software without restriction, including 15 without limitation the rights to use, copy, modify, merge, publish, 16 distribute, sublicense, and/or sell copies of the Software, and to 17 permit persons to whom the Software is furnished to do so, subject to 18 the following conditions: 19 20 The above copyright notice and this permission notice shall be included 21 in all copies or substantial portions of the Software. 22 23 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 24 EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 25 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 26 IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY 27 CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 28 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 29 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ 30 31 #ifndef XTENSA_CORE_CONFIGURATION_H_ 32 #define XTENSA_CORE_CONFIGURATION_H_ 33 34 35 /**************************************************************************** 36 Parameters Useful for Any Code, USER or PRIVILEGED 37 ****************************************************************************/ 38 39 /* 40 * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is 41 * configured, and a value of 0 otherwise. These macros are always defined. 42 */ 43 44 45 /*---------------------------------------------------------------------- 46 ISA 47 ----------------------------------------------------------------------*/ 48 49 #define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ 50 #define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ 51 #define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ 52 #define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ 53 #define XCHAL_MAX_INSTRUCTION_SIZE 11 /* max instr bytes (3..8) */ 54 #define XCHAL_HAVE_DEBUG 1 /* debug option */ 55 #define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ 56 #define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ 57 #define XCHAL_LOOP_BUFFER_SIZE 256 /* zero-ov. loop instr buffer size */ 58 #define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ 59 #define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ 60 #define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ 61 #define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ 62 #define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ 63 #define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ 64 #define XCHAL_HAVE_MUL32 1 /* MULL instruction */ 65 #define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ 66 #define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ 67 #define XCHAL_HAVE_L32R 1 /* L32R instruction */ 68 #define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ 69 #define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ 70 #define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ 71 #define XCHAL_HAVE_EXCLUSIVE 1 /* L32EX/S32EX instructions */ 72 #define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ 73 #define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ 74 #define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ 75 #define XCHAL_HAVE_ABS 1 /* ABS instruction */ 76 #define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ 77 #define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */ 78 #define XCHAL_HAVE_SPECULATION 0 /* speculation */ 79 #define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ 80 #define XCHAL_NUM_CONTEXTS 1 /* */ 81 #define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */ 82 #define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ 83 #define XCHAL_HAVE_PRID 1 /* processor ID register */ 84 #define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ 85 #define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ 86 #define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ 87 #define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ 88 #define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ 89 #define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ 90 #define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ 91 #define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ 92 #define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ 93 #define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ 94 #define XCHAL_CP_MAXCFG 2 /* max allowed cp id plus one */ 95 #define XCHAL_HAVE_MAC16 0 /* MAC16 package */ 96 #define XCHAL_HAVE_LX 1 /* LX core */ 97 #define XCHAL_HAVE_NX 0 /* NX core (starting RH) */ 98 99 #define XCHAL_HAVE_SUPERGATHER 0 /* SuperGather */ 100 101 #define XCHAL_HAVE_FUSION 0 /* Fusion*/ 102 #define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ 103 #define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ 104 #define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ 105 #define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ 106 #define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ 107 #define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ 108 #define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ 109 #define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ 110 #define XCHAL_HAVE_FUSION_VITERBI 0 /* Fusion Viterbi option */ 111 #define XCHAL_HAVE_FUSION_SOFTDEMAP 0 /* Fusion Soft Bit Demap option */ 112 #define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ 113 #define XCHAL_HAVE_HIFI5 0 /* HiFi5 Audio Engine pkg */ 114 #define XCHAL_HAVE_HIFI5_NN_MAC 0 /* HiFi5 Audio Engine NN-MAC option */ 115 #define XCHAL_HAVE_HIFI5_VFPU 0 /* HiFi5 Audio Engine Single-Precision VFPU option */ 116 #define XCHAL_HAVE_HIFI5_HP_VFPU 0 /* HiFi5 Audio Engine Half-Precision VFPU option */ 117 #define XCHAL_HAVE_HIFI4 1 /* HiFi4 Audio Engine pkg */ 118 #define XCHAL_HAVE_HIFI4_VFPU 1 /* HiFi4 Audio Engine VFPU option */ 119 #define XCHAL_HAVE_HIFI3 1 /* HiFi3 Audio Engine pkg */ 120 #define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ 121 #define XCHAL_HAVE_HIFI3Z 0 /* HiFi3Z Audio Engine pkg */ 122 #define XCHAL_HAVE_HIFI3Z_VFPU 0 /* HiFi3Z Audio Engine VFPU option */ 123 #define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ 124 #define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ 125 #define XCHAL_HAVE_HIFI_MINI 0 126 127 128 129 #define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ 130 #define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ 131 #define XCHAL_HAVE_USER_SPFPU 1 /* user SP floating-point pkg */ 132 #define XCHAL_HAVE_FP 1 /* single prec floating point */ 133 #define XCHAL_HAVE_FP_DIV 1 /* FP with DIV instructions */ 134 #define XCHAL_HAVE_FP_RECIP 1 /* FP with RECIP instructions */ 135 #define XCHAL_HAVE_FP_SQRT 1 /* FP with SQRT instructions */ 136 #define XCHAL_HAVE_FP_RSQRT 1 /* FP with RSQRT instructions */ 137 #define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ 138 #define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ 139 #define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ 140 #define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ 141 #define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ 142 #define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ 143 #define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ 144 145 #define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */ 146 #define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ 147 #define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ 148 #define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ 149 150 #define XCHAL_HAVE_FUSIONG 0 /* FusionG */ 151 #define XCHAL_HAVE_FUSIONG3 0 /* FusionG3 */ 152 #define XCHAL_HAVE_FUSIONG6 0 /* FusionG6 */ 153 #define XCHAL_HAVE_FUSIONG_SP_VFPU 0 /* sp_vfpu option on FusionG */ 154 #define XCHAL_HAVE_FUSIONG_DP_VFPU 0 /* dp_vfpu option on FusionG */ 155 #define XCHAL_FUSIONG_SIMD32 0 /* simd32 for FusionG */ 156 157 #define XCHAL_HAVE_FUSIONJ 0 /* FusionJ */ 158 #define XCHAL_HAVE_FUSIONJ6 0 /* FusionJ6 */ 159 #define XCHAL_HAVE_FUSIONJ_SP_VFPU 0 /* sp_vfpu option on FusionJ */ 160 #define XCHAL_HAVE_FUSIONJ_DP_VFPU 0 /* dp_vfpu option on FusionJ */ 161 #define XCHAL_FUSIONJ_SIMD32 0 /* simd32 for FusionJ */ 162 163 #define XCHAL_HAVE_PDX 0 /* PDX-LX */ 164 #define XCHAL_PDX_SIMD32 0 /* simd32 for PDX */ 165 #define XCHAL_HAVE_PDX4 0 /* PDX4-LX */ 166 #define XCHAL_HAVE_PDX8 0 /* PDX8-LX */ 167 #define XCHAL_HAVE_PDX16 0 /* PDX16-LX */ 168 #define XCHAL_HAVE_PDXNX 0 /* PDX-NX */ 169 170 #define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ 171 #define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ 172 #define XCHAL_HAVE_BALL 0 173 #define XCHAL_HAVE_BALLAP 0 174 #define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ 175 #define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ 176 #define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ 177 #define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ 178 #define XCHAL_HAVE_CONNX_B10 0 /* ConnX B10 pkg*/ 179 #define XCHAL_HAVE_CONNX_B20 0 /* ConnX B20 pkg*/ 180 #define XCHAL_HAVE_CONNX_B_DP_VFPU 0 /* Double-precision Vector Floating-point option on ConnX B10 & B20 */ 181 #define XCHAL_HAVE_CONNX_B_SP_VFPU 0 /* Single-precision Vector Floating-point option on ConnX B10 & B20 */ 182 #define XCHAL_HAVE_CONNX_B_SPX_VFPU 0 /* Single-precision Extended Vector Floating-point option on ConnX B10 & B20 */ 183 #define XCHAL_HAVE_CONNX_B_HPX_VFPU 0 /* Half-precision Extended Vector Floating-point option on ConnX B10 & B20 */ 184 #define XCHAL_HAVE_CONNX_B_32B_MAC 0 /* 32-bit vector MAC (real and complex), FIR & FFT option on ConnX B10 & B20 */ 185 #define XCHAL_HAVE_CONNX_B_VITERBI 0 /* Viterbi option on ConnX B10 & B20 */ 186 #define XCHAL_HAVE_CONNX_B_TURBO 0 /* Turbo option on ConnX B10 & B20 */ 187 #define XCHAL_HAVE_CONNX_B_LDPC 0 /* LDPC option on ConnX B10 & B20 */ 188 #define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ 189 #define XCHAL_HAVE_BBENEP_SP_VFPU 0 /* sp_vfpu option on BBE-EP */ 190 #define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ 191 #define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ 192 #define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ 193 #define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ 194 #define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ 195 #define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ 196 #define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ 197 #define XCHAL_HAVE_GRIVPEP 0 /* General Release of IVPEP */ 198 #define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ 199 200 #define XCHAL_HAVE_VISION 0 /* Vision P5/P6 */ 201 #define XCHAL_VISION_SIMD16 0 /* simd16 for Vision P5/P6 */ 202 #define XCHAL_VISION_TYPE 0 /* Vision P5, P6, Q6, Q7 or Q8 */ 203 #define XCHAL_VISION_QUAD_MAC_TYPE 0 /* quad_mac option on Vision P6 */ 204 #define XCHAL_HAVE_VISION_HISTOGRAM 0 /* histogram option on Vision P5/P6 */ 205 #define XCHAL_HAVE_VISION_DP_VFPU 0 /* dp_vfpu option on Vision Q7/Q8 */ 206 #define XCHAL_HAVE_VISION_SP_VFPU 0 /* sp_vfpu option on Vision P5/P6/Q6/Q7 */ 207 #define XCHAL_HAVE_VISION_SP_VFPU_2XFMAC 0 /* sp_vfpu_2xfma option on Vision Q7 */ 208 #define XCHAL_HAVE_VISION_HP_VFPU 0 /* hp_vfpu option on Vision P6/Q6 */ 209 #define XCHAL_HAVE_VISION_HP_VFPU_2XFMAC 0 /* hp_vfpu_2xfma option on Vision Q7 */ 210 211 #define XCHAL_HAVE_VISIONC 0 /* Vision C */ 212 213 #define XCHAL_HAVE_XNNE 0 /* XNNE */ 214 215 /*---------------------------------------------------------------------- 216 MISC 217 ----------------------------------------------------------------------*/ 218 219 #define XCHAL_NUM_LOADSTORE_UNITS 2 /* load/store units */ 220 #define XCHAL_NUM_WRITEBUFFER_ENTRIES 32 /* size of write buffer */ 221 #define XCHAL_INST_FETCH_WIDTH 16 /* instr-fetch width in bytes */ 222 #define XCHAL_DATA_WIDTH 8 /* data width in bytes */ 223 #define XCHAL_DATA_PIPE_DELAY 2 /* d-side pipeline delay 224 (1 = 5-stage, 2 = 7-stage) */ 225 #define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ 226 #define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ 227 /* In T1050, applies to selected core load and store instructions (see ISA): */ 228 #define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ 229 #define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ 230 #define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ 231 #define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ 232 233 #define XCHAL_UNIFIED_LOADSTORE 0 234 235 #define XCHAL_SW_VERSION 1406000 /* sw version of this header */ 236 #define XCHAL_SW_VERSION_MAJOR 14000 /* major ver# of sw */ 237 #define XCHAL_SW_VERSION_MINOR 6 /* minor ver# of sw */ 238 #define XCHAL_SW_VERSION_MICRO 0 /* micro ver# of sw */ 239 #define XCHAL_SW_MINOR_VERSION 1406000 /* with zeroed micro */ 240 #define XCHAL_SW_MICRO_VERSION 1406000 241 242 #define XCHAL_CORE_ID "hifi4_8195_PROD" /* alphanum core name 243 (CoreID) set in the Xtensa 244 Processor Generator */ 245 246 #define XCHAL_BUILD_UNIQUE_ID 0x000A1536 /* 22-bit sw build ID */ 247 248 /* 249 * These definitions describe the hardware targeted by this software. 250 */ 251 #define XCHAL_HW_CONFIGID0 0xC003B286 /* ConfigID hi 32 bits*/ 252 #define XCHAL_HW_CONFIGID1 0x28489932 /* ConfigID lo 32 bits*/ 253 #define XCHAL_HW_VERSION_NAME "LX7.1.1" /* full version name */ 254 #define XCHAL_HW_VERSION_MAJOR 2810 /* major ver# of targeted hw */ 255 #define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */ 256 #define XCHAL_HW_VERSION_MICRO 0 /* subdot ver# of targeted hw */ 257 #define XCHAL_HW_VERSION 281010 /* major*100+(major<2810 ? minor : minor*10+micro) */ 258 #define XCHAL_HW_REL_LX7 1 259 #define XCHAL_HW_REL_LX7_1 1 260 #define XCHAL_HW_REL_LX7_1_1 1 261 #define XCHAL_HW_CONFIGID_RELIABLE 1 262 /* If software targets a *range* of hardware versions, these are the bounds: */ 263 #define XCHAL_HW_MIN_VERSION_MAJOR 2810 /* major v of earliest tgt hw */ 264 #define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */ 265 #define XCHAL_HW_MIN_VERSION_MICRO 0 /* micro v of earliest tgt hw */ 266 #define XCHAL_HW_MIN_VERSION 281010 /* earliest targeted hw */ 267 #define XCHAL_HW_MAX_VERSION_MAJOR 2810 /* major v of latest tgt hw */ 268 #define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */ 269 #define XCHAL_HW_MAX_VERSION_MICRO 0 /* micro v of latest tgt hw */ 270 #define XCHAL_HW_MAX_VERSION 281010 /* latest targeted hw */ 271 272 /* Config is enabled for functional safety: */ 273 #define XCHAL_HAVE_FUNC_SAFETY 0 274 275 /* Config is enabled for secure operation: */ 276 #define XCHAL_HAVE_SECURE 0 277 278 #define XCHAL_HAVE_APB 0 279 280 /*---------------------------------------------------------------------- 281 CACHE 282 ----------------------------------------------------------------------*/ 283 284 #define XCHAL_ICACHE_LINESIZE 128 /* I-cache line size in bytes */ 285 #define XCHAL_DCACHE_LINESIZE 128 /* D-cache line size in bytes */ 286 #define XCHAL_ICACHE_LINEWIDTH 7 /* log2(I line size in bytes) */ 287 #define XCHAL_DCACHE_LINEWIDTH 7 /* log2(D line size in bytes) */ 288 289 #define XCHAL_ICACHE_SIZE 32768 /* I-cache size in bytes or 0 */ 290 #define XCHAL_ICACHE_SIZE_LOG2 15 291 #define XCHAL_DCACHE_SIZE 131072 /* D-cache size in bytes or 0 */ 292 #define XCHAL_DCACHE_SIZE_LOG2 17 293 294 #define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ 295 #define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ 296 297 #define XCHAL_HAVE_PREFETCH 1 /* PREFCTL register */ 298 #define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 cache */ 299 #define XCHAL_PREFETCH_CASTOUT_LINES 1 /* dcache pref. castout bufsz */ 300 #define XCHAL_PREFETCH_ENTRIES 16 /* cache prefetch entries */ 301 #define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ 302 #define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ 303 #define XCHAL_HAVE_CME_DOWNGRADES 0 304 #define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */ 305 #define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */ 306 #define XCHAL_HAVE_ICACHE_DYN_WAYS 1 /* Icache dynamic way support */ 307 #define XCHAL_HAVE_DCACHE_DYN_WAYS 1 /* Dcache dynamic way support */ 308 #define XCHAL_HAVE_ICACHE_DYN_ENABLE 1 /* Icache enabled via MEMCTL */ 309 #define XCHAL_HAVE_DCACHE_DYN_ENABLE 1 /* Dcache enabled via MEMCTL */ 310 311 #define XCHAL_L1SCACHE_SIZE 0 312 #define XCHAL_L1SCACHE_SIZE_LOG2 0 313 #define XCHAL_L1SCACHE_WAYS 1 314 #define XCHAL_L1SCACHE_WAYS_LOG2 0 315 #define XCHAL_L1SCACHE_ACCESS_SIZE 0 316 #define XCHAL_L1SCACHE_BANKS 1 317 318 #define XCHAL_L1VCACHE_SIZE 0 319 320 #define XCHAL_HAVE_L2 0 /* NX L2 cache controller */ 321 #define XCHAL_HAVE_L2_CACHE 0 322 #define XCHAL_NUM_CORES_IN_CLUSTER 0 323 324 /* PRID_ID macros are for internal use only ... subject to removal */ 325 #define PRID_ID_SHIFT 0 326 #define PRID_ID_BITS 4 327 #define PRID_ID_MASK 0x0000000F 328 329 /* This one is a form of caching, though not architecturally visible: */ 330 #define XCHAL_HAVE_BRANCH_PREDICTION 0 /* branch [target] prediction */ 331 332 333 334 335 /**************************************************************************** 336 Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code 337 ****************************************************************************/ 338 339 340 #ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY 341 342 /*---------------------------------------------------------------------- 343 CACHE 344 ----------------------------------------------------------------------*/ 345 346 #define XCHAL_HAVE_PIF 1 /* any outbound bus present */ 347 348 #define XCHAL_HAVE_AXI 1 /* AXI bus */ 349 #define XCHAL_HAVE_AXI_ECC 1 /* ECC on AXI bus */ 350 #define XCHAL_HAVE_ACELITE 0 /* ACELite bus */ 351 352 #define XCHAL_HAVE_PIF_WR_RESP 1 /* pif write response */ 353 #define XCHAL_HAVE_PIF_REQ_ATTR 1 /* pif attribute */ 354 355 /* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ 356 357 /* Number of cache sets in log2(lines per way): */ 358 #define XCHAL_ICACHE_SETWIDTH 6 359 #define XCHAL_DCACHE_SETWIDTH 8 360 361 /* Cache set associativity (number of ways): */ 362 #define XCHAL_ICACHE_WAYS 4 363 #define XCHAL_ICACHE_WAYS_LOG2 2 364 #define XCHAL_DCACHE_WAYS 4 365 #define XCHAL_DCACHE_WAYS_LOG2 2 366 367 /* Cache features: */ 368 #define XCHAL_ICACHE_LINE_LOCKABLE 1 369 #define XCHAL_DCACHE_LINE_LOCKABLE 1 370 #define XCHAL_ICACHE_ECC_PARITY 0 371 #define XCHAL_DCACHE_ECC_PARITY 0 372 #define XCHAL_ICACHE_ECC_WIDTH 4 373 #define XCHAL_DCACHE_ECC_WIDTH 1 374 375 /* Cache access size in bytes (affects operation of SICW instruction): */ 376 #define XCHAL_ICACHE_ACCESS_SIZE 16 377 #define XCHAL_DCACHE_ACCESS_SIZE 8 378 379 #define XCHAL_DCACHE_BANKS 2 /* number of banks */ 380 381 /* The number of Cache lines associated with a single cache tag */ 382 #define XCHAL_DCACHE_LINES_PER_TAG_LOG2 0 383 384 /* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ 385 386 387 /*---------------------------------------------------------------------- 388 INTERNAL I/D RAM/ROMs and XLMI 389 ----------------------------------------------------------------------*/ 390 #define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ 391 #define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ 392 #define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ 393 #define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ 394 #define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ 395 #define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ 396 #define XCHAL_HAVE_IRAMCFG 0 /* IRAMxCFG register present */ 397 #define XCHAL_HAVE_DRAMCFG 0 /* DRAMxCFG register present */ 398 399 #define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ 400 401 402 /*---------------------------------------------------------------------- 403 IDMA 404 ----------------------------------------------------------------------*/ 405 406 #define XCHAL_HAVE_IDMA 0 407 408 409 410 /*---------------------------------------------------------------------- 411 INTERRUPTS and TIMERS 412 ----------------------------------------------------------------------*/ 413 414 #define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ 415 #define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */ 416 #define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ 417 #define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ 418 #define XCHAL_NUM_INTERRUPTS 25 /* number of interrupts */ 419 #define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ 420 #define XCHAL_NUM_EXTINTERRUPTS 18 /* num of external interrupts */ 421 #define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels 422 (not including level zero) */ 423 424 425 #define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ 426 #define XCHAL_EXCM_LEVEL 2 /* level masked by PS.EXCM */ 427 /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ 428 429 /* Masks of interrupts at each interrupt level: */ 430 #define XCHAL_INTLEVEL1_MASK 0x00B900FF 431 #define XCHAL_INTLEVEL2_MASK 0x0142FF00 432 #define XCHAL_INTLEVEL3_MASK 0x00040000 433 #define XCHAL_INTLEVEL4_MASK 0x00000000 434 #define XCHAL_INTLEVEL5_MASK 0x00000000 435 #define XCHAL_INTLEVEL6_MASK 0x00000000 436 #define XCHAL_INTLEVEL7_MASK 0x00000000 437 438 /* Masks of interrupts at each range 1..n of interrupt levels: */ 439 #define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x00B900FF 440 #define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x01FBFFFF 441 #define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x01FFFFFF 442 #define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x01FFFFFF 443 #define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x01FFFFFF 444 #define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x01FFFFFF 445 #define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x01FFFFFF 446 447 /* Level of each interrupt: */ 448 #define XCHAL_INT0_LEVEL 1 449 #define XCHAL_INT1_LEVEL 1 450 #define XCHAL_INT2_LEVEL 1 451 #define XCHAL_INT3_LEVEL 1 452 #define XCHAL_INT4_LEVEL 1 453 #define XCHAL_INT5_LEVEL 1 454 #define XCHAL_INT6_LEVEL 1 455 #define XCHAL_INT7_LEVEL 1 456 #define XCHAL_INT8_LEVEL 2 457 #define XCHAL_INT9_LEVEL 2 458 #define XCHAL_INT10_LEVEL 2 459 #define XCHAL_INT11_LEVEL 2 460 #define XCHAL_INT12_LEVEL 2 461 #define XCHAL_INT13_LEVEL 2 462 #define XCHAL_INT14_LEVEL 2 463 #define XCHAL_INT15_LEVEL 2 464 #define XCHAL_INT16_LEVEL 1 465 #define XCHAL_INT17_LEVEL 2 466 #define XCHAL_INT18_LEVEL 3 467 #define XCHAL_INT19_LEVEL 1 468 #define XCHAL_INT20_LEVEL 1 469 #define XCHAL_INT21_LEVEL 1 470 #define XCHAL_INT22_LEVEL 2 471 #define XCHAL_INT23_LEVEL 1 472 #define XCHAL_INT24_LEVEL 2 473 #define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ 474 #define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ 475 476 /* Type of each interrupt: */ 477 #define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 478 #define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 479 #define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 480 #define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 481 #define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 482 #define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 483 #define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_EDGE 484 #define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE 485 #define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 486 #define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 487 #define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 488 #define XCHAL_INT11_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 489 #define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 490 #define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 491 #define XCHAL_INT14_TYPE XTHAL_INTTYPE_EXTERN_EDGE 492 #define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE 493 #define XCHAL_INT16_TYPE XTHAL_INTTYPE_TIMER 494 #define XCHAL_INT17_TYPE XTHAL_INTTYPE_TIMER 495 #define XCHAL_INT18_TYPE XTHAL_INTTYPE_TIMER 496 #define XCHAL_INT19_TYPE XTHAL_INTTYPE_WRITE_ERROR 497 #define XCHAL_INT20_TYPE XTHAL_INTTYPE_PROFILING 498 #define XCHAL_INT21_TYPE XTHAL_INTTYPE_SOFTWARE 499 #define XCHAL_INT22_TYPE XTHAL_INTTYPE_SOFTWARE 500 #define XCHAL_INT23_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 501 #define XCHAL_INT24_TYPE XTHAL_INTTYPE_EXTERN_LEVEL 502 503 /* Masks of interrupts for each type of interrupt: */ 504 #define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFE000000 505 #define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x01803F3F 506 #define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x0000C0C0 507 #define XCHAL_INTTYPE_MASK_NMI 0x00000000 508 #define XCHAL_INTTYPE_MASK_SOFTWARE 0x00600000 509 #define XCHAL_INTTYPE_MASK_TIMER 0x00070000 510 #define XCHAL_INTTYPE_MASK_ETIE 0x00000000 511 #define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00080000 512 #define XCHAL_INTTYPE_MASK_DBG_REQUEST 0x00000000 513 #define XCHAL_INTTYPE_MASK_BREAKIN 0x00000000 514 #define XCHAL_INTTYPE_MASK_TRAX 0x00000000 515 #define XCHAL_INTTYPE_MASK_PROFILING 0x00100000 516 #define XCHAL_INTTYPE_MASK_IDMA_DONE 0x00000000 517 #define XCHAL_INTTYPE_MASK_IDMA_ERR 0x00000000 518 #define XCHAL_INTTYPE_MASK_GS_ERR 0x00000000 519 #define XCHAL_INTTYPE_MASK_L2_ERR 0x00000000 520 #define XCHAL_INTTYPE_MASK_L2_STATUS 0x00000000 521 #define XCHAL_INTTYPE_MASK_COR_ECC_ERR 0x00000000 522 #define XCHAL_INTTYPE_MASK_WWDT 0x00000000 523 #define XCHAL_INTTYPE_MASK_FXLK 0x00000000 524 525 /* Interrupt numbers assigned to specific interrupt sources: */ 526 #define XCHAL_TIMER0_INTERRUPT 16 /* CCOMPARE0 */ 527 #define XCHAL_TIMER1_INTERRUPT 17 /* CCOMPARE1 */ 528 #define XCHAL_TIMER2_INTERRUPT 18 /* CCOMPARE2 */ 529 #define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED 530 #define XCHAL_WRITE_ERROR_INTERRUPT 19 531 #define XCHAL_PROFILING_INTERRUPT 20 532 533 /* Interrupt numbers for levels at which only one interrupt is configured: */ 534 #define XCHAL_INTLEVEL3_NUM 18 535 /* (There are many interrupts each at level(s) 1, 2.) */ 536 537 538 /* 539 * External interrupt mapping. 540 * These macros describe how Xtensa processor interrupt numbers 541 * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) 542 * map to external BInterrupt<n> pins, for those interrupts 543 * configured as external (level-triggered, edge-triggered, or NMI). 544 * See the Xtensa processor databook for more details. 545 */ 546 547 /* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ 548 #define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ 549 #define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ 550 #define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ 551 #define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ 552 #define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ 553 #define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ 554 #define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ 555 #define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ 556 #define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ 557 #define XCHAL_EXTINT9_NUM 9 /* (intlevel 2) */ 558 #define XCHAL_EXTINT10_NUM 10 /* (intlevel 2) */ 559 #define XCHAL_EXTINT11_NUM 11 /* (intlevel 2) */ 560 #define XCHAL_EXTINT12_NUM 12 /* (intlevel 2) */ 561 #define XCHAL_EXTINT13_NUM 13 /* (intlevel 2) */ 562 #define XCHAL_EXTINT14_NUM 14 /* (intlevel 2) */ 563 #define XCHAL_EXTINT15_NUM 15 /* (intlevel 2) */ 564 #define XCHAL_EXTINT16_NUM 23 /* (intlevel 1) */ 565 #define XCHAL_EXTINT17_NUM 24 /* (intlevel 2) */ 566 /* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ 567 #define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ 568 #define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ 569 #define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ 570 #define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ 571 #define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ 572 #define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ 573 #define XCHAL_INT6_EXTNUM 6 /* (intlevel 1) */ 574 #define XCHAL_INT7_EXTNUM 7 /* (intlevel 1) */ 575 #define XCHAL_INT8_EXTNUM 8 /* (intlevel 2) */ 576 #define XCHAL_INT9_EXTNUM 9 /* (intlevel 2) */ 577 #define XCHAL_INT10_EXTNUM 10 /* (intlevel 2) */ 578 #define XCHAL_INT11_EXTNUM 11 /* (intlevel 2) */ 579 #define XCHAL_INT12_EXTNUM 12 /* (intlevel 2) */ 580 #define XCHAL_INT13_EXTNUM 13 /* (intlevel 2) */ 581 #define XCHAL_INT14_EXTNUM 14 /* (intlevel 2) */ 582 #define XCHAL_INT15_EXTNUM 15 /* (intlevel 2) */ 583 #define XCHAL_INT23_EXTNUM 16 /* (intlevel 1) */ 584 #define XCHAL_INT24_EXTNUM 17 /* (intlevel 2) */ 585 586 #define XCHAL_HAVE_ISB 0 /* No ISB */ 587 #define XCHAL_ISB_VADDR 0 /* N/A */ 588 #define XCHAL_HAVE_ITB 0 /* No ITB */ 589 #define XCHAL_ITB_VADDR 0 /* N/A */ 590 591 #define XCHAL_HAVE_KSL 0 /* Kernel Stack Limit */ 592 #define XCHAL_HAVE_ISL 0 /* Interrupt Stack Limit */ 593 #define XCHAL_HAVE_PSL 0 /* Pageable Stack Limit */ 594 595 596 /*---------------------------------------------------------------------- 597 EXCEPTIONS and VECTORS 598 ----------------------------------------------------------------------*/ 599 600 #define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture 601 number: 1 == XEA1 (until T1050) 602 2 == XEA2 (T1040 onwards) 603 3 == XEA3 (LX8/NX/SX onwards) 604 0 == XEAX (extern) or TX */ 605 #define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ 606 #define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ 607 #define XCHAL_HAVE_XEA3 0 /* Exception Architecture 3 */ 608 #define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ 609 #define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ 610 #define XCHAL_HAVE_IMPRECISE_EXCEPTIONS 0 /* imprecise exception option */ 611 #define XCHAL_EXCCAUSE_NUM 64 /* Number of exceptions */ 612 #define XCHAL_HAVE_HALT 0 /* halt architecture option */ 613 #define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ 614 #define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ 615 #define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ 616 #define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ 617 #define XCHAL_VECBASE_RESET_VADDR 0x40000400 /* VECBASE reset value */ 618 #define XCHAL_VECBASE_RESET_PADDR 0x40000400 619 #define XCHAL_RESET_VECBASE_OVERLAP 0 /* UNUSED */ 620 621 #define XCHAL_RESET_VECTOR0_VADDR 0x40000000 622 #define XCHAL_RESET_VECTOR0_PADDR 0x40000000 623 #define XCHAL_RESET_VECTOR1_VADDR 0x40000640 624 #define XCHAL_RESET_VECTOR1_PADDR 0x40000640 625 #define XCHAL_RESET_VECTOR_VADDR XCHAL_RESET_VECTOR1_VADDR 626 #define XCHAL_RESET_VECTOR_PADDR XCHAL_RESET_VECTOR1_PADDR 627 #define XCHAL_USER_VECOFS 0x000001FC 628 #define XCHAL_USER_VECTOR_VADDR 0x400005FC 629 #define XCHAL_USER_VECTOR_PADDR 0x400005FC 630 #define XCHAL_KERNEL_VECOFS 0x000001DC 631 #define XCHAL_KERNEL_VECTOR_VADDR 0x400005DC 632 #define XCHAL_KERNEL_VECTOR_PADDR 0x400005DC 633 #define XCHAL_DOUBLEEXC_VECOFS 0x0000021C 634 #define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x4000061C 635 #define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x4000061C 636 #define XCHAL_WINDOW_OF4_VECOFS 0x00000000 637 #define XCHAL_WINDOW_UF4_VECOFS 0x00000040 638 #define XCHAL_WINDOW_OF8_VECOFS 0x00000080 639 #define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 640 #define XCHAL_WINDOW_OF12_VECOFS 0x00000100 641 #define XCHAL_WINDOW_UF12_VECOFS 0x00000140 642 #define XCHAL_WINDOW_VECTORS_VADDR 0x40000400 643 #define XCHAL_WINDOW_VECTORS_PADDR 0x40000400 644 #define XCHAL_INTLEVEL2_VECOFS 0x0000017C 645 #define XCHAL_INTLEVEL2_VECTOR_VADDR 0x4000057C 646 #define XCHAL_INTLEVEL2_VECTOR_PADDR 0x4000057C 647 #define XCHAL_INTLEVEL3_VECOFS 0x0000019C 648 #define XCHAL_INTLEVEL3_VECTOR_VADDR 0x4000059C 649 #define XCHAL_INTLEVEL3_VECTOR_PADDR 0x4000059C 650 #define XCHAL_INTLEVEL4_VECOFS 0x000001BC 651 #define XCHAL_INTLEVEL4_VECTOR_VADDR 0x400005BC 652 #define XCHAL_INTLEVEL4_VECTOR_PADDR 0x400005BC 653 #define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL4_VECOFS 654 #define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR 655 #define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR 656 657 658 /*---------------------------------------------------------------------- 659 DEBUG MODULE 660 ----------------------------------------------------------------------*/ 661 662 /* Misc */ 663 #define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */ 664 #define XCHAL_HAVE_DEBUG_APB 1 /* APB to debug module */ 665 #define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ 666 667 /* On-Chip Debug (OCD) */ 668 #define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ 669 #define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ 670 #define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ 671 #define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ 672 #define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ 673 674 /* TRAX (in core) */ 675 #define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */ 676 #define XCHAL_TRAX_MEM_SIZE 4096 /* TRAX memory size in bytes */ 677 #define XCHAL_TRAX_MEM_SHAREABLE 1 /* start/end regs; ready sig. */ 678 #define XCHAL_TRAX_ATB_WIDTH 32 /* ATB width (bits), 0=no ATB */ 679 #define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ 680 681 /* Perf counters */ 682 #define XCHAL_NUM_PERF_COUNTERS 8 /* performance counters */ 683 684 685 /*---------------------------------------------------------------------- 686 MMU 687 ----------------------------------------------------------------------*/ 688 689 /* See core-matmap.h header file for more details. */ 690 691 #define XCHAL_HAVE_TLBS 0 /* inverse of HAVE_CACHEATTR */ 692 #define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ 693 #define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ 694 #define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ 695 #define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ 696 #define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ 697 #define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table 698 [autorefill] and protection) 699 usable for an MMU-based OS */ 700 701 /* If none of the above last 5 are set, it's a custom TLB configuration. */ 702 703 #define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ 704 #define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ 705 #define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ 706 707 /*---------------------------------------------------------------------- 708 MPU 709 ----------------------------------------------------------------------*/ 710 #define XCHAL_HAVE_MPU 1 711 #define XCHAL_MPU_ENTRIES 32 712 #define XCHAL_MPU_LOCK 0 713 714 #define XCHAL_MPU_ALIGN_REQ 1 /* MPU requires alignment of entries to background map */ 715 #define XCHAL_MPU_BACKGROUND_ENTRIES 2 /* number of entries in bg map*/ 716 #define XCHAL_MPU_BG_CACHEADRDIS 0xFF /* default CACHEADRDIS for bg */ 717 718 #define XCHAL_MPU_ALIGN_BITS 12 719 #define XCHAL_MPU_ALIGN 4096 720 721 /*----------------------------------------------------------------------- 722 CSR Parity 723 ------------------------------------------------------------------------*/ 724 #define XCHAL_HAVE_CSR_PARITY 0 725 726 727 /*---------------------------------------------------------------------- 728 FLEX-LOCK 729 ------------------------------------------------------------------------*/ 730 731 #define XCHAL_HAVE_FXLK 0 732 733 /*---------------------------------------------------------------------- 734 WWDT (Windowed Watchdog Timer) 735 ------------------------------------------------------------------------*/ 736 #define XCHAL_HAVE_WWDT 0 737 #endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ 738 739 740 #endif /* XTENSA_CORE_CONFIGURATION_H_ */ 741 742
