1 /* 2 * Copyright (c) 2016-2020, Texas Instruments Incorporated 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * * Neither the name of Texas Instruments Incorporated nor the names of 17 * its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 27 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 28 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 /** ============================================================================ 33 * @file ClockP.h 34 * 35 * @brief Clock interface for the RTOS Porting Interface 36 * 37 * The ClockP module can be used to schedule functions that run at intervals 38 * specified in the underlying kernel's system ticks. ClockP instances are 39 * one-shot. The one-shot function will be run once 40 * after the specified period has elapsed since calling ClockP_start(). 41 * 42 * The ClockP module can also be used to obtain the period of the kernel's 43 * system tick in microseconds. This is useful for determining the number of 44 * ticks needed for setting a Clock object's period. 45 * 46 * When using the TI-RTOS kernel, ClockP functions are run at software 47 * interrupt level. With FreeRTOS, the ClockP functions are run by a timer 48 * service task with priority configured by the application. 49 * 50 * A common use case is to post a semaphore in the clock function. There is a 51 * specific API for this: Semaphore_postFromClock(). This must be used in a 52 * clock function (instead of Semaphore_post). 53 * 54 * ============================================================================ 55 */ 56 57 #ifndef ti_dpl_ClockP__include 58 #define ti_dpl_ClockP__include 59 60 #include <stdint.h> 61 #include <stdbool.h> 62 #include <stddef.h> 63 64 #include <zephyr.h> 65 66 #ifdef __cplusplus 67 extern "C" { 68 #endif 69 70 /*! 71 * @brief Prototype for a ClockP function. 72 */ 73 typedef void (*ClockP_Fxn)(uintptr_t arg); 74 75 /*! 76 * @brief Number of bytes greater than or equal to the size of any RTOS 77 * ClockP object. 78 * 79 * nortos: 32 (biggest of the HW-specific ClockP instance structs) 80 * SysBIOS: 36 81 * Zephyr: Modified to match size of ClockP_Obj 82 */ 83 #define ClockP_STRUCT_SIZE (sizeof(struct k_timer) + \ 84 sizeof(ClockP_Fxn) + sizeof(uintptr_t) + \ 85 sizeof(uint32_t) * 2) + sizeof(bool) 86 87 /*! 88 * @brief ClockP structure. 89 * 90 * Opaque structure that should be large enough to hold any of the 91 * RTOS specific ClockP objects. 92 */ 93 typedef union ClockP_Struct { 94 uint32_t dummy; /*!< Align object */ 95 char data[ClockP_STRUCT_SIZE]; 96 } ClockP_Struct; 97 98 /*! 99 * @brief Frequency-in-hertz struct 100 */ 101 typedef struct { 102 uint32_t hi; /*!< most significant 32-bits of frequency */ 103 uint32_t lo; /*!< least significant 32-bits of frequency */ 104 } ClockP_FreqHz; 105 106 /*! 107 * @brief Status codes for ClockP APIs 108 */ 109 typedef enum { 110 ClockP_OK = 0, 111 ClockP_FAILURE = -1 112 } ClockP_Status; 113 114 /*! 115 * @brief Opaque client reference to an instance of a ClockP 116 * 117 * A ClockP_Handle returned from the ::ClockP_create represents that instance. 118 * and then is used in the other instance based functions (e.g. ::ClockP_start, 119 * ::ClockP_stop, etc.). 120 */ 121 typedef void *ClockP_Handle; 122 123 #define ClockP_handle(x) ((ClockP_Handle)(x)) 124 125 extern uint32_t ClockP_tickPeriod; 126 127 /*! 128 * @brief Basic ClockP Parameters 129 * 130 * Structure that contains the parameters passed into ::ClockP_create 131 * when creating a ClockP instance. The ::ClockP_Params_init function should 132 * be used to initialize the fields to default values before the application 133 * sets the fields manually. The ClockP default parameters are noted in 134 * ClockP_Params_init. 135 * The default startFlag is false, meaning the user will have to call 136 * ClockP_start(). If startFlag is true, the clock instance will be 137 * started automatically when it is created. 138 * 139 * The default value of period is 0, indicating a one-shot clock object. 140 * A non-zero period indicates the clock function will be called 141 * periodically at the period rate (in system clock ticks), after the 142 * clock is initially started and set to expire with the 'timeout' 143 * argument. 144 */ 145 typedef struct { 146 bool startFlag; /*!< Start immediately after instance is created. */ 147 uint32_t period; /*!< Period of clock object. */ 148 uintptr_t arg; /*!< Argument passed into the clock function. */ 149 } ClockP_Params; 150 151 152 /*! 153 * @brief Function to construct a clock object. 154 * 155 * @param clockP Pointer to ClockP_Struct object. 156 * @param timeout The startup timeout, if supported by the RTOS. 157 * @param clockFxn Function called when timeout or period expires. 158 * 159 * @param params Pointer to the instance configuration parameters. NULL 160 * denotes to use the default parameters. The ClockP default 161 * parameters are noted in ::SwiP_Params_init. 162 * 163 * @return A ClockP_Handle on success or a NULL on an error 164 */ 165 extern ClockP_Handle ClockP_construct(ClockP_Struct *clockP, 166 ClockP_Fxn clockFxn, 167 uint32_t timeout, 168 ClockP_Params *params); 169 170 /*! 171 * @brief Function to destruct a clock object 172 * 173 * @param clockP Pointer to a ClockP_Struct object that was passed to 174 * ClockP_construct(). 175 * 176 * @return 177 */ 178 extern void ClockP_destruct(ClockP_Struct *clockP); 179 180 /*! 181 * @brief Function to create a clock object. 182 * 183 * @param clockFxn Function called when timeout or period expires. 184 * @param timeout The startup timeout, if supported by the RTOS. 185 * @param params Pointer to the instance configuration parameters. NULL 186 * denotes to use the default parameters. The ClockP default 187 * parameters are noted in ::ClockP_Params_init. 188 * 189 * @return A ClockP_Handle on success or a NULL on an error. This handle can 190 * be passed to ClockP_start() 191 */ 192 extern ClockP_Handle ClockP_create(ClockP_Fxn clockFxn, 193 uint32_t timeout, 194 ClockP_Params *params); 195 196 /*! 197 * @brief Function to delete a clock. 198 * 199 * @param handle A ClockP_Handle returned from ::ClockP_create 200 */ 201 extern void ClockP_delete(ClockP_Handle handle); 202 203 /*! 204 * @brief Get CPU frequency in Hz 205 * 206 * @param freq Pointer to the FreqHz structure 207 */ 208 extern void ClockP_getCpuFreq(ClockP_FreqHz *freq); 209 210 /*! 211 * @brief Get the system tick period in microseconds. 212 * 213 * @return The kernel's system tick period in microseconds. 214 */ 215 extern uint32_t ClockP_getSystemTickPeriod(); 216 217 /*! 218 * @brief Get the current tick value 219 * 220 * The value returned will wrap back to zero after it reaches the max 221 * value that can be stored in 32 bits. 222 * 223 * @return Time in system clock ticks 224 */ 225 extern uint32_t ClockP_getSystemTicks(); 226 227 /*! 228 * @brief Get number of ClockP tick periods expected to expire between 229 * now and the next interrupt from the timer peripheral 230 * 231 * Returns the number of ClockP tick periods that are expected to expore 232 * between now and the next interrupt from the timer peripheral. 233 * 234 * Used internally by PowerCC26XX module 235 * 236 * @return count in ticks 237 */ 238 extern uint32_t ClockP_getTicksUntilInterrupt(); 239 240 /*! 241 * @brief Get timeout of clock instance. 242 * 243 * Returns the remaining time in clock ticks if the instance has 244 * been started. If the clock is not active, the initial timeout value 245 * is returned. 246 * 247 * @return remaining timeout in clock ticks. 248 * 249 * Cannot change the initial timeout if the clock has been started. 250 */ 251 extern uint32_t ClockP_getTimeout(ClockP_Handle handle); 252 253 /*! 254 * @brief Determine if a clock object is currently active (i.e., running) 255 * 256 * Returns true if the clock object is currently active, otherwise 257 * returns false. 258 * 259 * @return active state 260 */ 261 extern bool ClockP_isActive(ClockP_Handle handle); 262 263 /*! 264 * @brief Initialize params structure to default values. 265 * 266 * The default parameters are: 267 * - name: NULL 268 * - arg: 0 269 * 270 * @param params Pointer to the instance configuration parameters. 271 */ 272 extern void ClockP_Params_init(ClockP_Params *params); 273 274 /*! 275 * @brief Set the initial timeout 276 * 277 * @param timeout Initial timeout in ClockP ticks 278 * 279 * Cannot change the initial timeout if the clock has been started. 280 */ 281 extern void ClockP_setTimeout(ClockP_Handle handle, uint32_t timeout); 282 283 /*! 284 * @brief Function to start a clock. 285 * 286 * @param handle A ClockP_Handle returned from ::ClockP_create 287 */ 288 extern void ClockP_start(ClockP_Handle handle); 289 290 /*! 291 * @brief Function to stop a clock. 292 * 293 * @param handle A ClockP_Handle returned from ::ClockP_create 294 * 295 * It is ok to call ClockP_stop() for a clock that has not been started. 296 * 297 * @return Status of the functions 298 * - ClockP_OK: Stopped the clock function successfully 299 * - ClockP_FAILURE: The API failed. 300 */ 301 extern void ClockP_stop(ClockP_Handle handle); 302 303 extern void ClockP_timestamp(ClockP_Handle handle); 304 305 /*! 306 * @brief Set delay in microseconds 307 * 308 * @param usec A duration in micro seconds 309 * 310 * @return ClockP_OK 311 */ 312 extern void ClockP_usleep(uint32_t usec); 313 314 /*! 315 * @brief Set delay in seconds 316 * 317 * @param sec A duration in seconds 318 * 319 * @return ClockP_OK 320 */ 321 extern void ClockP_sleep(uint32_t sec); 322 323 324 #ifdef __cplusplus 325 } 326 #endif 327 328 #endif /* ti_dpl_ClockP__include */ 329
