1 /** 2 ****************************************************************************** 3 * @file stm32mp1xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32MP1xx_HAL_CONF_H 21 #define STM32MP1xx_HAL_CONF_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Exported types ------------------------------------------------------------*/ 28 /* Exported constants --------------------------------------------------------*/ 29 30 /* ########################## Module Selection ############################## */ 31 /** 32 * @brief This is the list of modules to be used in the HAL driver 33 */ 34 #define HAL_MODULE_ENABLED 35 #define HAL_ADC_MODULE_ENABLED 36 #define HAL_CEC_MODULE_ENABLED 37 #define HAL_CORTEX_MODULE_ENABLED 38 #define HAL_CRC_MODULE_ENABLED 39 #define HAL_CRYP_MODULE_ENABLED 40 #define HAL_DAC_MODULE_ENABLED 41 #define HAL_DCMI_MODULE_ENABLED 42 #define HAL_DFSDM_MODULE_ENABLED 43 #define HAL_DMA_MODULE_ENABLED 44 #define HAL_EXTI_MODULE_ENABLED 45 #define HAL_FDCAN_MODULE_ENABLED 46 #define HAL_GPIO_MODULE_ENABLED 47 #define HAL_HASH_MODULE_ENABLED 48 #define HAL_HSEM_MODULE_ENABLED 49 #define HAL_I2C_MODULE_ENABLED 50 #define HAL_IPCC_MODULE_ENABLED 51 #define HAL_LPTIM_MODULE_ENABLED 52 #define HAL_MDMA_MODULE_ENABLED 53 #define HAL_PWR_MODULE_ENABLED 54 #define HAL_QSPI_MODULE_ENABLED 55 #define HAL_RCC_MODULE_ENABLED 56 #define HAL_RNG_MODULE_ENABLED 57 #define HAL_RTC_MODULE_ENABLED 58 #define HAL_SAI_MODULE_ENABLED 59 #define HAL_SD_MODULE_ENABLED 60 #define HAL_SMARTCARD_MODULE_ENABLED 61 #define HAL_SMBUS_MODULE_ENABLED 62 #define HAL_SPDIFRX_MODULE_ENABLED 63 #define HAL_SPI_MODULE_ENABLED 64 #define HAL_SRAM_MODULE_ENABLED 65 #define HAL_TIM_MODULE_ENABLED 66 #define HAL_UART_MODULE_ENABLED 67 #define HAL_USART_MODULE_ENABLED 68 #define HAL_WWDG_MODULE_ENABLED 69 70 /* ########################## Register Callbacks selection ############################## */ 71 /** 72 * @brief This is the list of modules where register callback can be used 73 */ 74 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 75 #define USE_HAL_CEC_REGISTER_CALLBACKS 0u 76 #define USE_HAL_DAC_REGISTER_CALLBACKS 0u 77 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 78 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 79 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 80 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 81 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 82 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 83 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 84 85 /* ################## SPI peripheral configuration ########################## */ 86 87 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 88 * Activated: CRC code is present inside driver 89 * Deactivated: CRC code cleaned from driver 90 */ 91 #define USE_SPI_CRC 1U 92 93 /* ######################### Oscillator Values adaptation ################### */ 94 /** 95 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 96 * This value is used by the RCC HAL module to compute the system frequency 97 * (when HSE is used as system clock source, directly or through the PLL). 98 */ 99 #if !defined (HSE_VALUE) 100 #define HSE_VALUE 24000000U /*!< Value of the External oscillator in Hz */ 101 #endif /* HSE_VALUE */ 102 103 /** 104 * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 105 * Timeout value 106 */ 107 #if !defined (HSE_STARTUP_TIMEOUT) 108 #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ 109 #endif /* HSE_STARTUP_TIMEOUT */ 110 111 /** 112 * @brief Internal High Speed oscillator (HSI) value. 113 * This value is used by the RCC HAL module to compute the system frequency 114 * (when HSI is used as system clock source, directly or through the PLL). 115 */ 116 #if !defined (HSI_VALUE) 117 #define HSI_VALUE 64000000U /*!< Value of the Internal oscillator in Hz*/ 118 #endif /* HSI_VALUE */ 119 120 /** 121 * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 122 * Timeout value 123 */ 124 #if !defined (HSI_STARTUP_TIMEOUT) 125 #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ 126 #endif /* HSI_STARTUP_TIMEOUT */ 127 128 129 /** 130 * @brief Internal Low Speed oscillator (LSI) value. 131 */ 132 #if !defined (LSI_VALUE) 133 #define LSI_VALUE 32000U 134 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 135 The real value may vary depending on the variations 136 in voltage and temperature. */ 137 /** 138 * @brief External Low Speed oscillator (LSE) value. 139 */ 140 #if !defined (LSE_VALUE) 141 #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ 142 #endif /* LSE_VALUE */ 143 144 /** 145 * @brief Time out for LSE start up value in ms. 146 */ 147 #if !defined (LSE_STARTUP_TIMEOUT) 148 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ 149 #endif /* LSE_STARTUP_TIMEOUT */ 150 151 /** 152 * @brief Internal oscillator (CSI) default value. 153 * This value is the default CSI value after Reset. 154 */ 155 #if !defined (CSI_VALUE) 156 #define CSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ 157 #endif /* CSI_VALUE */ 158 159 /** 160 * @brief External clock source for I2S peripheral 161 * This value is used by the I2S HAL module to compute the I2S clock source 162 * frequency, this source is inserted directly through I2S_CKIN pad. 163 */ 164 #if !defined (EXTERNAL_CLOCK_VALUE) 165 #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ 166 #endif /* EXTERNAL_CLOCK_VALUE */ 167 168 /* Tip: To avoid modifying this file each time you need to use different HSE, 169 === you can define the HSE value in your toolchain compiler preprocessor. */ 170 171 /* ########################### System Configuration ######################### */ 172 /** 173 * @brief This is the HAL system configuration section 174 */ 175 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 176 #define TICK_INT_PRIORITY ((uint32_t)(1U<<4U) - 1U) /*!< tick interrupt priority (lowest by default) */ 177 /* Warning: Must be set to higher priority for HAL_Delay() */ 178 /* and HAL_GetTick() usage under interrupt context */ 179 #define USE_RTOS 0U 180 #define PREFETCH_ENABLE 0U 181 #define INSTRUCTION_CACHE_ENABLE 0U 182 #define DATA_CACHE_ENABLE 0U 183 184 /* ########################## Assert Selection ############################## */ 185 /** 186 * @brief Uncomment the line below to expanse the "assert_param" macro in the 187 * HAL drivers code 188 */ 189 /*#define USE_FULL_ASSERT 1*/ 190 191 /* Includes ------------------------------------------------------------------*/ 192 /** 193 * @brief Include module's header file 194 */ 195 196 #ifdef HAL_RCC_MODULE_ENABLED 197 #include "stm32mp1xx_hal_rcc.h" 198 #endif /* HAL_RCC_MODULE_ENABLED */ 199 200 #ifdef HAL_GPIO_MODULE_ENABLED 201 #include "stm32mp1xx_hal_gpio.h" 202 #endif /* HAL_GPIO_MODULE_ENABLED */ 203 204 #ifdef HAL_HSEM_MODULE_ENABLED 205 #include "stm32mp1xx_hal_hsem.h" 206 #endif /* HAL_HSEM_MODULE_ENABLED */ 207 208 #ifdef HAL_DMA_MODULE_ENABLED 209 #include "stm32mp1xx_hal_dma.h" 210 #endif /* HAL_DMA_MODULE_ENABLED */ 211 212 #ifdef HAL_MDMA_MODULE_ENABLED 213 #include "stm32mp1xx_hal_mdma.h" 214 #endif /* HAL_MDMA_MODULE_ENABLED */ 215 216 #ifdef HAL_CORTEX_MODULE_ENABLED 217 #include "stm32mp1xx_hal_cortex.h" 218 #endif /* HAL_CORTEX_MODULE_ENABLED */ 219 220 #ifdef HAL_ADC_MODULE_ENABLED 221 #include "stm32mp1xx_hal_adc.h" 222 #endif /* HAL_ADC_MODULE_ENABLED */ 223 224 #ifdef HAL_CEC_MODULE_ENABLED 225 #include "stm32mp1xx_hal_cec.h" 226 #endif /* HAL_CEC_MODULE_ENABLED */ 227 228 #ifdef HAL_CRC_MODULE_ENABLED 229 #include "stm32mp1xx_hal_crc.h" 230 #endif /* HAL_CRC_MODULE_ENABLED */ 231 232 #ifdef HAL_CRYP_MODULE_ENABLED 233 #include "stm32mp1xx_hal_cryp.h" 234 #endif /* HAL_CRYP_MODULE_ENABLED */ 235 236 #ifdef HAL_DAC_MODULE_ENABLED 237 #include "stm32mp1xx_hal_dac.h" 238 #endif /* HAL_DAC_MODULE_ENABLED */ 239 240 #ifdef HAL_DCMI_MODULE_ENABLED 241 #include "stm32mp1xx_hal_dcmi.h" 242 #endif /* HAL_DCMI_MODULE_ENABLED */ 243 244 #ifdef HAL_DFSDM_MODULE_ENABLED 245 #include "stm32mp1xx_hal_dfsdm.h" 246 #endif /* HAL_DFSDM_MODULE_ENABLED */ 247 248 #ifdef HAL_FDCAN_MODULE_ENABLED 249 #include "stm32mp1xx_hal_fdcan.h" 250 #endif /* HAL_FDCAN_MODULE_ENABLED */ 251 252 #ifdef HAL_HASH_MODULE_ENABLED 253 #include "stm32mp1xx_hal_hash.h" 254 #endif /* HAL_HASH_MODULE_ENABLED */ 255 256 #ifdef HAL_I2C_MODULE_ENABLED 257 #include "stm32mp1xx_hal_i2c.h" 258 #endif /* HAL_I2C_MODULE_ENABLED */ 259 260 #ifdef HAL_IPCC_MODULE_ENABLED 261 #include "stm32mp1xx_hal_ipcc.h" 262 #endif /* HAL_IPCC_MODULE_ENABLED */ 263 264 #ifdef HAL_LPTIM_MODULE_ENABLED 265 #include "stm32mp1xx_hal_lptim.h" 266 #endif /* HAL_LPTIM_MODULE_ENABLED */ 267 268 #ifdef HAL_PWR_MODULE_ENABLED 269 #include "stm32mp1xx_hal_pwr.h" 270 #endif /* HAL_PWR_MODULE_ENABLED */ 271 272 #ifdef HAL_QSPI_MODULE_ENABLED 273 #include "stm32mp1xx_hal_qspi.h" 274 #endif /* HAL_QSPI_MODULE_ENABLED */ 275 276 #ifdef HAL_RNG_MODULE_ENABLED 277 #include "stm32mp1xx_hal_rng.h" 278 #endif /* HAL_RNG_MODULE_ENABLED */ 279 280 #ifdef HAL_RTC_MODULE_ENABLED 281 #include "stm32mp1xx_hal_rtc.h" 282 #endif /* HAL_RTC_MODULE_ENABLED */ 283 284 #ifdef HAL_SAI_MODULE_ENABLED 285 #include "stm32mp1xx_hal_sai.h" 286 #endif /* HAL_SAI_MODULE_ENABLED */ 287 288 #ifdef HAL_SD_MODULE_ENABLED 289 #include "stm32mp1xx_hal_sd.h" 290 #endif /* HAL_SD_MODULE_ENABLED */ 291 292 #ifdef HAL_SMARTCARD_MODULE_ENABLED 293 #include "stm32mp1xx_hal_smartcard.h" 294 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 295 296 #ifdef HAL_SMBUS_MODULE_ENABLED 297 #include "stm32mp1xx_hal_smbus.h" 298 #endif /* HAL_SMBUS_MODULE_ENABLED */ 299 300 #ifdef HAL_SPDIFRX_MODULE_ENABLED 301 #include "stm32mp1xx_hal_spdifrx.h" 302 #endif /* HAL_SPDIFRX_MODULE_ENABLED */ 303 304 #ifdef HAL_SPI_MODULE_ENABLED 305 #include "stm32mp1xx_hal_spi.h" 306 #endif /* HAL_SPI_MODULE_ENABLED */ 307 308 #ifdef HAL_SRAM_MODULE_ENABLED 309 #include "stm32mp1xx_hal_sram.h" 310 #endif /* HAL_SRAM_MODULE_ENABLED */ 311 312 #ifdef HAL_TIM_MODULE_ENABLED 313 #include "stm32mp1xx_hal_tim.h" 314 #endif /* HAL_TIM_MODULE_ENABLED */ 315 316 #ifdef HAL_UART_MODULE_ENABLED 317 #include "stm32mp1xx_hal_uart.h" 318 #endif /* HAL_UART_MODULE_ENABLED */ 319 320 #ifdef HAL_USART_MODULE_ENABLED 321 #include "stm32mp1xx_hal_usart.h" 322 #endif /* HAL_USART_MODULE_ENABLED */ 323 324 #ifdef HAL_WWDG_MODULE_ENABLED 325 #include "stm32mp1xx_hal_wwdg.h" 326 #endif /* HAL_WWDG_MODULE_ENABLED */ 327 328 /* Exported macro ------------------------------------------------------------*/ 329 #ifdef USE_FULL_ASSERT 330 /** 331 * @brief The assert_param macro is used for function's parameters check. 332 * @param expr: If expr is false, it calls assert_failed function 333 * which reports the name of the source file and the source 334 * line number of the call that failed. 335 * If expr is true, it returns no value. 336 * @retval None 337 */ 338 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 339 /* Exported functions ------------------------------------------------------- */ 340 void assert_failed(uint8_t* file, uint32_t line); 341 #else 342 #define assert_param(expr) ((void)0U) 343 #endif /* USE_FULL_ASSERT */ 344 345 #ifdef __cplusplus 346 } 347 #endif 348 349 #endif /* STM32MP1xx_HAL_CONF_H */ 350
