1 /** 2 ****************************************************************************** 3 * @file stm32f0xx_hal_uart_ex.h 4 * @author MCD Application Team 5 * @brief Header file of UART HAL Extended module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32F0xx_HAL_UART_EX_H 21 #define STM32F0xx_HAL_UART_EX_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f0xx_hal_def.h" 29 30 /** @addtogroup STM32F0xx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup UARTEx 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /** @defgroup UARTEx_Exported_Types UARTEx Exported Types 40 * @{ 41 */ 42 43 #if defined(USART_CR1_UESM) 44 /** 45 * @brief UART wake up from stop mode parameters 46 */ 47 typedef struct 48 { 49 uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). 50 This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. 51 If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must 52 be filled up. */ 53 54 uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. 55 This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ 56 57 uint8_t Address; /*!< UART/USART node address (7-bit long max). */ 58 } UART_WakeUpTypeDef; 59 60 #endif /* USART_CR1_UESM */ 61 /** 62 * @} 63 */ 64 65 /* Exported constants --------------------------------------------------------*/ 66 /** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants 67 * @{ 68 */ 69 70 /** @defgroup UARTEx_Word_Length UARTEx Word Length 71 * @{ 72 */ 73 #if defined(USART_CR1_M1) 74 #define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ 75 #endif /* USART_CR1_M1 */ 76 #define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ 77 #if defined (USART_CR1_M0) 78 #define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ 79 #else 80 #define UART_WORDLENGTH_9B USART_CR1_M /*!< 9-bit long UART frame */ 81 #endif /* USART_CR1_M0 */ 82 /** 83 * @} 84 */ 85 86 /** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length 87 * @{ 88 */ 89 #define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ 90 #define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ 91 /** 92 * @} 93 */ 94 95 /** 96 * @} 97 */ 98 99 /* Exported macros -----------------------------------------------------------*/ 100 /* Exported functions --------------------------------------------------------*/ 101 /** @addtogroup UARTEx_Exported_Functions 102 * @{ 103 */ 104 105 /** @addtogroup UARTEx_Exported_Functions_Group1 106 * @{ 107 */ 108 109 /* Initialization and de-initialization functions ****************************/ 110 HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, 111 uint32_t DeassertionTime); 112 113 /** 114 * @} 115 */ 116 117 /** @addtogroup UARTEx_Exported_Functions_Group2 118 * @{ 119 */ 120 121 #if defined(USART_CR1_UESM) 122 void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); 123 124 #endif /* USART_CR1_UESM */ 125 /** 126 * @} 127 */ 128 129 /** @addtogroup UARTEx_Exported_Functions_Group3 130 * @{ 131 */ 132 133 /* Peripheral Control functions **********************************************/ 134 #if defined(USART_CR1_UESM) 135 HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); 136 HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); 137 HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); 138 139 #endif /* USART_CR1_UESM */ 140 HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); 141 142 143 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, 144 uint32_t Timeout); 145 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 146 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 147 148 HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); 149 150 151 /** 152 * @} 153 */ 154 155 /** 156 * @} 157 */ 158 159 /* Private macros ------------------------------------------------------------*/ 160 /** @defgroup UARTEx_Private_Macros UARTEx Private Macros 161 * @{ 162 */ 163 164 /** @brief Report the UART clock source. 165 * @param __HANDLE__ specifies the UART Handle. 166 * @param __CLOCKSOURCE__ output variable. 167 * @retval UART clocking source, written in __CLOCKSOURCE__. 168 */ 169 170 #if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) 171 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 172 do { \ 173 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 174 { \ 175 case RCC_USART1CLKSOURCE_PCLK1: \ 176 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 177 break; \ 178 case RCC_USART1CLKSOURCE_HSI: \ 179 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 180 break; \ 181 case RCC_USART1CLKSOURCE_SYSCLK: \ 182 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 183 break; \ 184 case RCC_USART1CLKSOURCE_LSE: \ 185 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 186 break; \ 187 default: \ 188 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 189 break; \ 190 } \ 191 } while(0) 192 #elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) \ 193 || defined (STM32F051x8) || defined (STM32F058xx) 194 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 195 do { \ 196 if((__HANDLE__)->Instance == USART1) \ 197 { \ 198 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 199 { \ 200 case RCC_USART1CLKSOURCE_PCLK1: \ 201 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 202 break; \ 203 case RCC_USART1CLKSOURCE_HSI: \ 204 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 205 break; \ 206 case RCC_USART1CLKSOURCE_SYSCLK: \ 207 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 208 break; \ 209 case RCC_USART1CLKSOURCE_LSE: \ 210 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 211 break; \ 212 default: \ 213 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 214 break; \ 215 } \ 216 } \ 217 else if((__HANDLE__)->Instance == USART2) \ 218 { \ 219 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 220 } \ 221 else \ 222 { \ 223 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 224 } \ 225 } while(0) 226 #elif defined(STM32F070xB) 227 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 228 do { \ 229 if((__HANDLE__)->Instance == USART1) \ 230 { \ 231 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 232 { \ 233 case RCC_USART1CLKSOURCE_PCLK1: \ 234 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 235 break; \ 236 case RCC_USART1CLKSOURCE_HSI: \ 237 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 238 break; \ 239 case RCC_USART1CLKSOURCE_SYSCLK: \ 240 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 241 break; \ 242 case RCC_USART1CLKSOURCE_LSE: \ 243 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 244 break; \ 245 default: \ 246 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 247 break; \ 248 } \ 249 } \ 250 else if((__HANDLE__)->Instance == USART2) \ 251 { \ 252 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 253 } \ 254 else if((__HANDLE__)->Instance == USART3) \ 255 { \ 256 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 257 } \ 258 else if((__HANDLE__)->Instance == USART4) \ 259 { \ 260 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 261 } \ 262 else \ 263 { \ 264 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 265 } \ 266 } while(0) 267 #elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) 268 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 269 do { \ 270 if((__HANDLE__)->Instance == USART1) \ 271 { \ 272 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 273 { \ 274 case RCC_USART1CLKSOURCE_PCLK1: \ 275 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 276 break; \ 277 case RCC_USART1CLKSOURCE_HSI: \ 278 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 279 break; \ 280 case RCC_USART1CLKSOURCE_SYSCLK: \ 281 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 282 break; \ 283 case RCC_USART1CLKSOURCE_LSE: \ 284 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 285 break; \ 286 default: \ 287 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 288 break; \ 289 } \ 290 } \ 291 else if((__HANDLE__)->Instance == USART2) \ 292 { \ 293 switch(__HAL_RCC_GET_USART2_SOURCE()) \ 294 { \ 295 case RCC_USART2CLKSOURCE_PCLK1: \ 296 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 297 break; \ 298 case RCC_USART2CLKSOURCE_HSI: \ 299 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 300 break; \ 301 case RCC_USART2CLKSOURCE_SYSCLK: \ 302 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 303 break; \ 304 case RCC_USART2CLKSOURCE_LSE: \ 305 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 306 break; \ 307 default: \ 308 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 309 break; \ 310 } \ 311 } \ 312 else if((__HANDLE__)->Instance == USART3) \ 313 { \ 314 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 315 } \ 316 else if((__HANDLE__)->Instance == USART4) \ 317 { \ 318 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 319 } \ 320 else \ 321 { \ 322 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 323 } \ 324 } while(0) 325 #elif defined(STM32F091xC) || defined (STM32F098xx) 326 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 327 do { \ 328 if((__HANDLE__)->Instance == USART1) \ 329 { \ 330 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 331 { \ 332 case RCC_USART1CLKSOURCE_PCLK1: \ 333 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 334 break; \ 335 case RCC_USART1CLKSOURCE_HSI: \ 336 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 337 break; \ 338 case RCC_USART1CLKSOURCE_SYSCLK: \ 339 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 340 break; \ 341 case RCC_USART1CLKSOURCE_LSE: \ 342 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 343 break; \ 344 default: \ 345 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 346 break; \ 347 } \ 348 } \ 349 else if((__HANDLE__)->Instance == USART2) \ 350 { \ 351 switch(__HAL_RCC_GET_USART2_SOURCE()) \ 352 { \ 353 case RCC_USART2CLKSOURCE_PCLK1: \ 354 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 355 break; \ 356 case RCC_USART2CLKSOURCE_HSI: \ 357 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 358 break; \ 359 case RCC_USART2CLKSOURCE_SYSCLK: \ 360 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 361 break; \ 362 case RCC_USART2CLKSOURCE_LSE: \ 363 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 364 break; \ 365 default: \ 366 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 367 break; \ 368 } \ 369 } \ 370 else if((__HANDLE__)->Instance == USART3) \ 371 { \ 372 switch(__HAL_RCC_GET_USART3_SOURCE()) \ 373 { \ 374 case RCC_USART3CLKSOURCE_PCLK1: \ 375 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 376 break; \ 377 case RCC_USART3CLKSOURCE_HSI: \ 378 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 379 break; \ 380 case RCC_USART3CLKSOURCE_SYSCLK: \ 381 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 382 break; \ 383 case RCC_USART3CLKSOURCE_LSE: \ 384 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 385 break; \ 386 default: \ 387 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 388 break; \ 389 } \ 390 } \ 391 else if((__HANDLE__)->Instance == USART4) \ 392 { \ 393 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 394 } \ 395 else if((__HANDLE__)->Instance == USART5) \ 396 { \ 397 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 398 } \ 399 else if((__HANDLE__)->Instance == USART6) \ 400 { \ 401 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 402 } \ 403 else if((__HANDLE__)->Instance == USART7) \ 404 { \ 405 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 406 } \ 407 else if((__HANDLE__)->Instance == USART8) \ 408 { \ 409 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 410 } \ 411 else \ 412 { \ 413 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 414 } \ 415 } while(0) 416 #elif defined(STM32F030xC) 417 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 418 do { \ 419 if((__HANDLE__)->Instance == USART1) \ 420 { \ 421 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 422 { \ 423 case RCC_USART1CLKSOURCE_PCLK1: \ 424 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 425 break; \ 426 case RCC_USART1CLKSOURCE_HSI: \ 427 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 428 break; \ 429 case RCC_USART1CLKSOURCE_SYSCLK: \ 430 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 431 break; \ 432 case RCC_USART1CLKSOURCE_LSE: \ 433 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 434 break; \ 435 default: \ 436 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 437 break; \ 438 } \ 439 } \ 440 else if((__HANDLE__)->Instance == USART2) \ 441 { \ 442 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 443 } \ 444 else if((__HANDLE__)->Instance == USART3) \ 445 { \ 446 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 447 } \ 448 else if((__HANDLE__)->Instance == USART4) \ 449 { \ 450 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 451 } \ 452 else if((__HANDLE__)->Instance == USART5) \ 453 { \ 454 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 455 } \ 456 else if((__HANDLE__)->Instance == USART6) \ 457 { \ 458 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 459 } \ 460 else \ 461 { \ 462 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 463 } \ 464 } while(0) 465 466 #endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ 467 468 /** @brief Report the UART mask to apply to retrieve the received data 469 * according to the word length and to the parity bits activation. 470 * @note If PCE = 1, the parity bit is not included in the data extracted 471 * by the reception API(). 472 * This masking operation is not carried out in the case of 473 * DMA transfers. 474 * @param __HANDLE__ specifies the UART Handle. 475 * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. 476 */ 477 #if defined (USART_CR1_M1) 478 #define UART_MASK_COMPUTATION(__HANDLE__) \ 479 do { \ 480 if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ 481 { \ 482 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 483 { \ 484 (__HANDLE__)->Mask = 0x01FFU ; \ 485 } \ 486 else \ 487 { \ 488 (__HANDLE__)->Mask = 0x00FFU ; \ 489 } \ 490 } \ 491 else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ 492 { \ 493 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 494 { \ 495 (__HANDLE__)->Mask = 0x00FFU ; \ 496 } \ 497 else \ 498 { \ 499 (__HANDLE__)->Mask = 0x007FU ; \ 500 } \ 501 } \ 502 else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ 503 { \ 504 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 505 { \ 506 (__HANDLE__)->Mask = 0x007FU ; \ 507 } \ 508 else \ 509 { \ 510 (__HANDLE__)->Mask = 0x003FU ; \ 511 } \ 512 } \ 513 else \ 514 { \ 515 (__HANDLE__)->Mask = 0x0000U; \ 516 } \ 517 } while(0U) 518 519 #else 520 #define UART_MASK_COMPUTATION(__HANDLE__) \ 521 do { \ 522 if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ 523 { \ 524 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 525 { \ 526 (__HANDLE__)->Mask = 0x01FFU ; \ 527 } \ 528 else \ 529 { \ 530 (__HANDLE__)->Mask = 0x00FFU ; \ 531 } \ 532 } \ 533 else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ 534 { \ 535 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 536 { \ 537 (__HANDLE__)->Mask = 0x00FFU ; \ 538 } \ 539 else \ 540 { \ 541 (__HANDLE__)->Mask = 0x007FU ; \ 542 } \ 543 } \ 544 else \ 545 { \ 546 (__HANDLE__)->Mask = 0x0000U; \ 547 } \ 548 } while(0U) 549 550 #endif /* USART_CR1_M1 */ 551 552 /** 553 * @brief Ensure that UART frame length is valid. 554 * @param __LENGTH__ UART frame length. 555 * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) 556 */ 557 #if defined (USART_CR1_M1) 558 #define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ 559 ((__LENGTH__) == UART_WORDLENGTH_8B) || \ 560 ((__LENGTH__) == UART_WORDLENGTH_9B)) 561 #else 562 #define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ 563 ((__LENGTH__) == UART_WORDLENGTH_9B)) 564 #endif /* USART_CR1_M1 */ 565 566 /** 567 * @brief Ensure that UART wake-up address length is valid. 568 * @param __ADDRESS__ UART wake-up address length. 569 * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) 570 */ 571 #define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ 572 ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) 573 574 /** 575 * @} 576 */ 577 578 /* Private functions ---------------------------------------------------------*/ 579 580 /** 581 * @} 582 */ 583 584 /** 585 * @} 586 */ 587 588 #ifdef __cplusplus 589 } 590 #endif 591 592 #endif /* STM32F0xx_HAL_UART_EX_H */ 593 594
