1 /** 2 ****************************************************************************** 3 * @file stm32l4xx_hal_smbus.h 4 * @author MCD Application Team 5 * @brief Header file of SMBUS HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2017 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32L4xx_HAL_SMBUS_H 21 #define STM32L4xx_HAL_SMBUS_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32l4xx_hal_def.h" 29 30 /** @addtogroup STM32L4xx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup SMBUS 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /** @defgroup SMBUS_Exported_Types SMBUS Exported Types 40 * @{ 41 */ 42 43 /** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition 44 * @brief SMBUS Configuration Structure definition 45 * @{ 46 */ 47 typedef struct 48 { 49 uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value. 50 This parameter calculated by referring to SMBUS initialization section 51 in Reference manual */ 52 uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. 53 This parameter can be a value of @ref SMBUS_Analog_Filter */ 54 55 uint32_t OwnAddress1; /*!< Specifies the first device own address. 56 This parameter can be a 7-bit or 10-bit address. */ 57 58 uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected. 59 This parameter can be a value of @ref SMBUS_addressing_mode */ 60 61 uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. 62 This parameter can be a value of @ref SMBUS_dual_addressing_mode */ 63 64 uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected 65 This parameter can be a 7-bit address. */ 66 67 uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address 68 if dual addressing mode is selected 69 This parameter can be a value of @ref SMBUS_own_address2_masks. */ 70 71 uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. 72 This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */ 73 74 uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. 75 This parameter can be a value of @ref SMBUS_nostretch_mode */ 76 77 uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. 78 This parameter can be a value of @ref SMBUS_packet_error_check_mode */ 79 80 uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. 81 This parameter can be a value of @ref SMBUS_peripheral_mode */ 82 83 uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. 84 (Enable bits and different timeout values) 85 This parameter calculated by referring to SMBUS initialization section 86 in Reference manual */ 87 } SMBUS_InitTypeDef; 88 /** 89 * @} 90 */ 91 92 /** @defgroup HAL_state_definition HAL state definition 93 * @brief HAL State definition 94 * @{ 95 */ 96 #define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */ 97 #define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */ 98 #define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */ 99 #define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ 100 #define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ 101 #define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ 102 #define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ 103 #define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */ 104 #define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */ 105 #define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ 106 /** 107 * @} 108 */ 109 110 /** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition 111 * @brief SMBUS Error Code definition 112 * @{ 113 */ 114 #define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */ 115 #define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ 116 #define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ 117 #define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ 118 #define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ 119 #define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ 120 #define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ 121 #define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ 122 #define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ 123 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 124 #define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ 125 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 126 #define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ 127 /** 128 * @} 129 */ 130 131 /** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition 132 * @brief SMBUS handle Structure definition 133 * @{ 134 */ 135 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 136 typedef struct __SMBUS_HandleTypeDef 137 #else 138 typedef struct 139 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 140 { 141 I2C_TypeDef *Instance; /*!< SMBUS registers base address */ 142 143 SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ 144 145 uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ 146 147 uint16_t XferSize; /*!< SMBUS transfer size */ 148 149 __IO uint16_t XferCount; /*!< SMBUS transfer counter */ 150 151 __IO uint32_t XferOptions; /*!< SMBUS transfer options */ 152 153 __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */ 154 155 HAL_LockTypeDef Lock; /*!< SMBUS locking object */ 156 157 __IO uint32_t State; /*!< SMBUS communication state */ 158 159 __IO uint32_t ErrorCode; /*!< SMBUS Error code */ 160 161 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 162 void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 163 /*!< SMBUS Master Tx Transfer completed callback */ 164 void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 165 /*!< SMBUS Master Rx Transfer completed callback */ 166 void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 167 /*!< SMBUS Slave Tx Transfer completed callback */ 168 void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 169 /*!< SMBUS Slave Rx Transfer completed callback */ 170 void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 171 /*!< SMBUS Listen Complete callback */ 172 void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 173 /*!< SMBUS Error callback */ 174 175 void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); 176 /*!< SMBUS Slave Address Match callback */ 177 178 void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 179 /*!< SMBUS Msp Init callback */ 180 void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); 181 /*!< SMBUS Msp DeInit callback */ 182 183 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 184 } SMBUS_HandleTypeDef; 185 186 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 187 /** 188 * @brief HAL SMBUS Callback ID enumeration definition 189 */ 190 typedef enum 191 { 192 HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ 193 HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ 194 HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ 195 HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ 196 HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ 197 HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */ 198 199 HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */ 200 HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */ 201 202 } HAL_SMBUS_CallbackIDTypeDef; 203 204 /** 205 * @brief HAL SMBUS Callback pointer definition 206 */ 207 typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); 208 /*!< pointer to an SMBUS callback function */ 209 typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, 210 uint16_t AddrMatchCode); 211 /*!< pointer to an SMBUS Address Match callback function */ 212 213 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 214 /** 215 * @} 216 */ 217 218 /** 219 * @} 220 */ 221 /* Exported constants --------------------------------------------------------*/ 222 223 /** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants 224 * @{ 225 */ 226 227 /** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter 228 * @{ 229 */ 230 #define SMBUS_ANALOGFILTER_ENABLE (0x00000000U) 231 #define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF 232 /** 233 * @} 234 */ 235 236 /** @defgroup SMBUS_addressing_mode SMBUS addressing mode 237 * @{ 238 */ 239 #define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U) 240 #define SMBUS_ADDRESSINGMODE_10BIT (0x00000002U) 241 /** 242 * @} 243 */ 244 245 /** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode 246 * @{ 247 */ 248 249 #define SMBUS_DUALADDRESS_DISABLE (0x00000000U) 250 #define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN 251 /** 252 * @} 253 */ 254 255 /** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks 256 * @{ 257 */ 258 259 #define SMBUS_OA2_NOMASK ((uint8_t)0x00U) 260 #define SMBUS_OA2_MASK01 ((uint8_t)0x01U) 261 #define SMBUS_OA2_MASK02 ((uint8_t)0x02U) 262 #define SMBUS_OA2_MASK03 ((uint8_t)0x03U) 263 #define SMBUS_OA2_MASK04 ((uint8_t)0x04U) 264 #define SMBUS_OA2_MASK05 ((uint8_t)0x05U) 265 #define SMBUS_OA2_MASK06 ((uint8_t)0x06U) 266 #define SMBUS_OA2_MASK07 ((uint8_t)0x07U) 267 /** 268 * @} 269 */ 270 271 272 /** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode 273 * @{ 274 */ 275 #define SMBUS_GENERALCALL_DISABLE (0x00000000U) 276 #define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN 277 /** 278 * @} 279 */ 280 281 /** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode 282 * @{ 283 */ 284 #define SMBUS_NOSTRETCH_DISABLE (0x00000000U) 285 #define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH 286 /** 287 * @} 288 */ 289 290 /** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode 291 * @{ 292 */ 293 #define SMBUS_PEC_DISABLE (0x00000000U) 294 #define SMBUS_PEC_ENABLE I2C_CR1_PECEN 295 /** 296 * @} 297 */ 298 299 /** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode 300 * @{ 301 */ 302 #define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN 303 #define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U) 304 #define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN 305 /** 306 * @} 307 */ 308 309 /** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition 310 * @{ 311 */ 312 313 #define SMBUS_SOFTEND_MODE (0x00000000U) 314 #define SMBUS_RELOAD_MODE I2C_CR2_RELOAD 315 #define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND 316 #define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE 317 /** 318 * @} 319 */ 320 321 /** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition 322 * @{ 323 */ 324 325 #define SMBUS_NO_STARTSTOP (0x00000000U) 326 #define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) 327 #define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) 328 #define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) 329 /** 330 * @} 331 */ 332 333 /** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition 334 * @{ 335 */ 336 337 /* List of XferOptions in usage of : 338 * 1- Restart condition when direction change 339 * 2- No Restart condition in other use cases 340 */ 341 #define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE 342 #define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE)) 343 #define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE 344 #define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE 345 #define SMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE)) 346 #define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) 347 #define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) 348 349 /* List of XferOptions in usage of : 350 * 1- Restart condition in all use cases (direction change or not) 351 */ 352 #define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) 353 #define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) 354 #define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) 355 #define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) 356 /** 357 * @} 358 */ 359 360 /** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition 361 * @brief SMBUS Interrupt definition 362 * Elements values convention: 0xXXXXXXXX 363 * - XXXXXXXX : Interrupt control mask 364 * @{ 365 */ 366 #define SMBUS_IT_ERRI I2C_CR1_ERRIE 367 #define SMBUS_IT_TCI I2C_CR1_TCIE 368 #define SMBUS_IT_STOPI I2C_CR1_STOPIE 369 #define SMBUS_IT_NACKI I2C_CR1_NACKIE 370 #define SMBUS_IT_ADDRI I2C_CR1_ADDRIE 371 #define SMBUS_IT_RXI I2C_CR1_RXIE 372 #define SMBUS_IT_TXI I2C_CR1_TXIE 373 #define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \ 374 SMBUS_IT_NACKI | SMBUS_IT_TXI) 375 #define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \ 376 SMBUS_IT_RXI) 377 #define SMBUS_IT_ALERT (SMBUS_IT_ERRI) 378 #define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI) 379 /** 380 * @} 381 */ 382 383 /** @defgroup SMBUS_Flag_definition SMBUS Flag definition 384 * @brief Flag definition 385 * Elements values convention: 0xXXXXYYYY 386 * - XXXXXXXX : Flag mask 387 * @{ 388 */ 389 390 #define SMBUS_FLAG_TXE I2C_ISR_TXE 391 #define SMBUS_FLAG_TXIS I2C_ISR_TXIS 392 #define SMBUS_FLAG_RXNE I2C_ISR_RXNE 393 #define SMBUS_FLAG_ADDR I2C_ISR_ADDR 394 #define SMBUS_FLAG_AF I2C_ISR_NACKF 395 #define SMBUS_FLAG_STOPF I2C_ISR_STOPF 396 #define SMBUS_FLAG_TC I2C_ISR_TC 397 #define SMBUS_FLAG_TCR I2C_ISR_TCR 398 #define SMBUS_FLAG_BERR I2C_ISR_BERR 399 #define SMBUS_FLAG_ARLO I2C_ISR_ARLO 400 #define SMBUS_FLAG_OVR I2C_ISR_OVR 401 #define SMBUS_FLAG_PECERR I2C_ISR_PECERR 402 #define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT 403 #define SMBUS_FLAG_ALERT I2C_ISR_ALERT 404 #define SMBUS_FLAG_BUSY I2C_ISR_BUSY 405 #define SMBUS_FLAG_DIR I2C_ISR_DIR 406 /** 407 * @} 408 */ 409 410 /** 411 * @} 412 */ 413 414 /* Exported macros ------------------------------------------------------------*/ 415 /** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros 416 * @{ 417 */ 418 419 /** @brief Reset SMBUS handle state. 420 * @param __HANDLE__ specifies the SMBUS Handle. 421 * @retval None 422 */ 423 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 424 #define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ 425 (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ 426 (__HANDLE__)->MspInitCallback = NULL; \ 427 (__HANDLE__)->MspDeInitCallback = NULL; \ 428 } while(0) 429 #else 430 #define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) 431 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 432 433 /** @brief Enable the specified SMBUS interrupts. 434 * @param __HANDLE__ specifies the SMBUS Handle. 435 * @param __INTERRUPT__ specifies the interrupt source to enable. 436 * This parameter can be one of the following values: 437 * @arg @ref SMBUS_IT_ERRI Errors interrupt enable 438 * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable 439 * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable 440 * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable 441 * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable 442 * @arg @ref SMBUS_IT_RXI RX interrupt enable 443 * @arg @ref SMBUS_IT_TXI TX interrupt enable 444 * 445 * @retval None 446 */ 447 #define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) 448 449 /** @brief Disable the specified SMBUS interrupts. 450 * @param __HANDLE__ specifies the SMBUS Handle. 451 * @param __INTERRUPT__ specifies the interrupt source to disable. 452 * This parameter can be one of the following values: 453 * @arg @ref SMBUS_IT_ERRI Errors interrupt enable 454 * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable 455 * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable 456 * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable 457 * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable 458 * @arg @ref SMBUS_IT_RXI RX interrupt enable 459 * @arg @ref SMBUS_IT_TXI TX interrupt enable 460 * 461 * @retval None 462 */ 463 #define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) 464 465 /** @brief Check whether the specified SMBUS interrupt source is enabled or not. 466 * @param __HANDLE__ specifies the SMBUS Handle. 467 * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. 468 * This parameter can be one of the following values: 469 * @arg @ref SMBUS_IT_ERRI Errors interrupt enable 470 * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable 471 * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable 472 * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable 473 * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable 474 * @arg @ref SMBUS_IT_RXI RX interrupt enable 475 * @arg @ref SMBUS_IT_TXI TX interrupt enable 476 * 477 * @retval The new state of __IT__ (SET or RESET). 478 */ 479 #define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ 480 ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) 481 482 /** @brief Check whether the specified SMBUS flag is set or not. 483 * @param __HANDLE__ specifies the SMBUS Handle. 484 * @param __FLAG__ specifies the flag to check. 485 * This parameter can be one of the following values: 486 * @arg @ref SMBUS_FLAG_TXE Transmit data register empty 487 * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status 488 * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty 489 * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) 490 * @arg @ref SMBUS_FLAG_AF NACK received flag 491 * @arg @ref SMBUS_FLAG_STOPF STOP detection flag 492 * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode) 493 * @arg @ref SMBUS_FLAG_TCR Transfer complete reload 494 * @arg @ref SMBUS_FLAG_BERR Bus error 495 * @arg @ref SMBUS_FLAG_ARLO Arbitration lost 496 * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun 497 * @arg @ref SMBUS_FLAG_PECERR PEC error in reception 498 * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag 499 * @arg @ref SMBUS_FLAG_ALERT SMBus alert 500 * @arg @ref SMBUS_FLAG_BUSY Bus busy 501 * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode) 502 * 503 * @retval The new state of __FLAG__ (SET or RESET). 504 */ 505 #define SMBUS_FLAG_MASK (0x0001FFFFU) 506 #define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \ 507 (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ 508 ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) 509 510 /** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit. 511 * @param __HANDLE__ specifies the SMBUS Handle. 512 * @param __FLAG__ specifies the flag to clear. 513 * This parameter can be any combination of the following values: 514 * @arg @ref SMBUS_FLAG_TXE Transmit data register empty 515 * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) 516 * @arg @ref SMBUS_FLAG_AF NACK received flag 517 * @arg @ref SMBUS_FLAG_STOPF STOP detection flag 518 * @arg @ref SMBUS_FLAG_BERR Bus error 519 * @arg @ref SMBUS_FLAG_ARLO Arbitration lost 520 * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun 521 * @arg @ref SMBUS_FLAG_PECERR PEC error in reception 522 * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag 523 * @arg @ref SMBUS_FLAG_ALERT SMBus alert 524 * 525 * @retval None 526 */ 527 #define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == SMBUS_FLAG_TXE) ? \ 528 ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ 529 ((__HANDLE__)->Instance->ICR = (__FLAG__))) 530 531 /** @brief Enable the specified SMBUS peripheral. 532 * @param __HANDLE__ specifies the SMBUS Handle. 533 * @retval None 534 */ 535 #define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) 536 537 /** @brief Disable the specified SMBUS peripheral. 538 * @param __HANDLE__ specifies the SMBUS Handle. 539 * @retval None 540 */ 541 #define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) 542 543 /** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. 544 * @param __HANDLE__ specifies the SMBUS Handle. 545 * @retval None 546 */ 547 #define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) 548 549 /** 550 * @} 551 */ 552 553 554 /* Private constants ---------------------------------------------------------*/ 555 556 /* Private macros ------------------------------------------------------------*/ 557 /** @defgroup SMBUS_Private_Macro SMBUS Private Macros 558 * @{ 559 */ 560 561 #define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ 562 ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) 563 564 #define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) 565 566 #define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \ 567 ((MODE) == SMBUS_ADDRESSINGMODE_10BIT)) 568 569 #define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ 570 ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) 571 572 #define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \ 573 ((MASK) == SMBUS_OA2_MASK01) || \ 574 ((MASK) == SMBUS_OA2_MASK02) || \ 575 ((MASK) == SMBUS_OA2_MASK03) || \ 576 ((MASK) == SMBUS_OA2_MASK04) || \ 577 ((MASK) == SMBUS_OA2_MASK05) || \ 578 ((MASK) == SMBUS_OA2_MASK06) || \ 579 ((MASK) == SMBUS_OA2_MASK07)) 580 581 #define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ 582 ((CALL) == SMBUS_GENERALCALL_ENABLE)) 583 584 #define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ 585 ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) 586 587 #define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ 588 ((PEC) == SMBUS_PEC_ENABLE)) 589 590 #define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ 591 ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ 592 ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) 593 594 #define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \ 595 ((MODE) == SMBUS_AUTOEND_MODE) || \ 596 ((MODE) == SMBUS_SOFTEND_MODE) || \ 597 ((MODE) == SMBUS_SENDPEC_MODE) || \ 598 ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \ 599 ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \ 600 ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \ 601 ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \ 602 SMBUS_RELOAD_MODE ))) 603 604 605 #define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \ 606 ((REQUEST) == SMBUS_GENERATE_START_READ) || \ 607 ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \ 608 ((REQUEST) == SMBUS_NO_STARTSTOP)) 609 610 611 #define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ 612 ((REQUEST) == SMBUS_FIRST_FRAME) || \ 613 ((REQUEST) == SMBUS_NEXT_FRAME) || \ 614 ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ 615 ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ 616 ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \ 617 ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ 618 ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) 619 620 #define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \ 621 ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ 622 ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \ 623 ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) 624 625 #define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \ 626 (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \ 627 I2C_CR1_PECEN))) 628 #define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ 629 (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ 630 I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ 631 I2C_CR2_RD_WRN))) 632 633 #define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \ 634 (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ 635 (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ 636 (~I2C_CR2_RD_WRN)) : \ 637 (uint32_t)((((uint32_t)(__ADDRESS__) & \ 638 (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \ 639 (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) 640 641 #define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U) 642 #define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U) 643 #define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) 644 #define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE) 645 #define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN) 646 647 #define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ 648 ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) 649 #define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) 650 651 #define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) 652 #define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) 653 654 /** 655 * @} 656 */ 657 658 /* Include SMBUS HAL Extended module */ 659 #include "stm32l4xx_hal_smbus_ex.h" 660 661 /* Exported functions --------------------------------------------------------*/ 662 /** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions 663 * @{ 664 */ 665 666 /** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions 667 * @{ 668 */ 669 670 /* Initialization and de-initialization functions ****************************/ 671 HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); 672 HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); 673 void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); 674 void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); 675 HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); 676 HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); 677 678 /* Callbacks Register/UnRegister functions ***********************************/ 679 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) 680 HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, 681 HAL_SMBUS_CallbackIDTypeDef CallbackID, 682 pSMBUS_CallbackTypeDef pCallback); 683 HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, 684 HAL_SMBUS_CallbackIDTypeDef CallbackID); 685 686 HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, 687 pSMBUS_AddrCallbackTypeDef pCallback); 688 HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); 689 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ 690 /** 691 * @} 692 */ 693 694 /** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions 695 * @{ 696 */ 697 698 /* IO operation functions *****************************************************/ 699 /** @addtogroup Blocking_mode_Polling Blocking mode Polling 700 * @{ 701 */ 702 /******* Blocking mode: Polling */ 703 HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, 704 uint32_t Timeout); 705 /** 706 * @} 707 */ 708 709 /** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt 710 * @{ 711 */ 712 /******* Non-Blocking mode: Interrupt */ 713 HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, 714 uint8_t *pData, uint16_t Size, uint32_t XferOptions); 715 HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, 716 uint8_t *pData, uint16_t Size, uint32_t XferOptions); 717 HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); 718 HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, 719 uint32_t XferOptions); 720 HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, 721 uint32_t XferOptions); 722 723 HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); 724 HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); 725 HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); 726 HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); 727 /** 728 * @} 729 */ 730 731 /** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks 732 * @{ 733 */ 734 /******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ 735 void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); 736 void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); 737 void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); 738 void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); 739 void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); 740 void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); 741 void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); 742 void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); 743 void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); 744 745 /** 746 * @} 747 */ 748 749 /** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions 750 * @{ 751 */ 752 753 /* Peripheral State and Errors functions **************************************************/ 754 uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus); 755 uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus); 756 757 /** 758 * @} 759 */ 760 761 /** 762 * @} 763 */ 764 765 /* Private Functions ---------------------------------------------------------*/ 766 /** @defgroup SMBUS_Private_Functions SMBUS Private Functions 767 * @{ 768 */ 769 /* Private functions are defined in stm32l4xx_hal_smbus.c file */ 770 /** 771 * @} 772 */ 773 774 /** 775 * @} 776 */ 777 778 /** 779 * @} 780 */ 781 782 /** 783 * @} 784 */ 785 786 #ifdef __cplusplus 787 } 788 #endif 789 790 791 #endif /* STM32L4xx_HAL_SMBUS_H */ 792
