1 /** 2 ****************************************************************************** 3 * @file stm32wlxx_hal_uart_ex.h 4 * @author MCD Application Team 5 * @brief Header file of UART HAL Extended module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2020 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32WLxx_HAL_UART_EX_H 21 #define STM32WLxx_HAL_UART_EX_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32wlxx_hal_def.h" 29 30 /** @addtogroup STM32WLxx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup UARTEx 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /** @defgroup UARTEx_Exported_Types UARTEx Exported Types 40 * @{ 41 */ 42 43 /** 44 * @brief UART wake up from stop mode parameters 45 */ 46 typedef struct 47 { 48 uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). 49 This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. 50 If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must 51 be filled up. */ 52 53 uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. 54 This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ 55 56 uint8_t Address; /*!< UART/USART node address (7-bit long max). */ 57 } UART_WakeUpTypeDef; 58 59 /** 60 * @} 61 */ 62 63 /* Exported constants --------------------------------------------------------*/ 64 /** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants 65 * @{ 66 */ 67 68 /** @defgroup UARTEx_Word_Length UARTEx Word Length 69 * @{ 70 */ 71 #define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ 72 #define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ 73 #define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ 74 /** 75 * @} 76 */ 77 78 /** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length 79 * @{ 80 */ 81 #define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ 82 #define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ 83 /** 84 * @} 85 */ 86 87 /** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode 88 * @brief UART FIFO mode 89 * @{ 90 */ 91 #define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ 92 #define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ 93 /** 94 * @} 95 */ 96 97 /** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level 98 * @brief UART TXFIFO threshold level 99 * @{ 100 */ 101 #define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ 102 #define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ 103 #define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ 104 #define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ 105 #define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ 106 #define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ 107 /** 108 * @} 109 */ 110 111 /** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level 112 * @brief UART RXFIFO threshold level 113 * @{ 114 */ 115 #define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ 116 #define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ 117 #define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ 118 #define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ 119 #define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ 120 #define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ 121 /** 122 * @} 123 */ 124 125 /** 126 * @} 127 */ 128 129 /* Exported macros -----------------------------------------------------------*/ 130 /* Exported functions --------------------------------------------------------*/ 131 /** @addtogroup UARTEx_Exported_Functions 132 * @{ 133 */ 134 135 /** @addtogroup UARTEx_Exported_Functions_Group1 136 * @{ 137 */ 138 139 /* Initialization and de-initialization functions ****************************/ 140 HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, 141 uint32_t DeassertionTime); 142 143 /** 144 * @} 145 */ 146 147 /** @addtogroup UARTEx_Exported_Functions_Group2 148 * @{ 149 */ 150 151 void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); 152 153 void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); 154 void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); 155 156 /** 157 * @} 158 */ 159 160 /** @addtogroup UARTEx_Exported_Functions_Group3 161 * @{ 162 */ 163 164 /* Peripheral Control functions **********************************************/ 165 HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); 166 HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); 167 HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); 168 169 HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); 170 171 HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); 172 HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); 173 HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); 174 HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); 175 176 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); 177 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 178 HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); 179 180 HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart); 181 182 183 /** 184 * @} 185 */ 186 187 /** 188 * @} 189 */ 190 191 /* Private macros ------------------------------------------------------------*/ 192 /** @defgroup UARTEx_Private_Macros UARTEx Private Macros 193 * @{ 194 */ 195 196 /** @brief Report the UART clock source. 197 * @param __HANDLE__ specifies the UART Handle. 198 * @param __CLOCKSOURCE__ output variable. 199 * @retval UART clocking source, written in __CLOCKSOURCE__. 200 */ 201 #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ 202 do { \ 203 if((__HANDLE__)->Instance == USART1) \ 204 { \ 205 switch(__HAL_RCC_GET_USART1_SOURCE()) \ 206 { \ 207 case RCC_USART1CLKSOURCE_PCLK2: \ 208 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ 209 break; \ 210 case RCC_USART1CLKSOURCE_HSI: \ 211 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 212 break; \ 213 case RCC_USART1CLKSOURCE_SYSCLK: \ 214 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 215 break; \ 216 case RCC_USART1CLKSOURCE_LSE: \ 217 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 218 break; \ 219 default: \ 220 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 221 break; \ 222 } \ 223 } \ 224 else if((__HANDLE__)->Instance == USART2) \ 225 { \ 226 switch(__HAL_RCC_GET_USART2_SOURCE()) \ 227 { \ 228 case RCC_USART2CLKSOURCE_PCLK1: \ 229 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 230 break; \ 231 case RCC_USART2CLKSOURCE_HSI: \ 232 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 233 break; \ 234 case RCC_USART2CLKSOURCE_SYSCLK: \ 235 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 236 break; \ 237 case RCC_USART2CLKSOURCE_LSE: \ 238 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 239 break; \ 240 default: \ 241 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 242 break; \ 243 } \ 244 } \ 245 else if((__HANDLE__)->Instance == LPUART1) \ 246 { \ 247 switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ 248 { \ 249 case RCC_LPUART1CLKSOURCE_PCLK1: \ 250 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ 251 break; \ 252 case RCC_LPUART1CLKSOURCE_HSI: \ 253 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ 254 break; \ 255 case RCC_LPUART1CLKSOURCE_SYSCLK: \ 256 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ 257 break; \ 258 case RCC_LPUART1CLKSOURCE_LSE: \ 259 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ 260 break; \ 261 default: \ 262 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 263 break; \ 264 } \ 265 } \ 266 else \ 267 { \ 268 (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ 269 } \ 270 } while(0U) 271 272 /** @brief Report the UART mask to apply to retrieve the received data 273 * according to the word length and to the parity bits activation. 274 * @note If PCE = 1, the parity bit is not included in the data extracted 275 * by the reception API(). 276 * This masking operation is not carried out in the case of 277 * DMA transfers. 278 * @param __HANDLE__ specifies the UART Handle. 279 * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. 280 */ 281 #define UART_MASK_COMPUTATION(__HANDLE__) \ 282 do { \ 283 if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ 284 { \ 285 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 286 { \ 287 (__HANDLE__)->Mask = 0x01FFU ; \ 288 } \ 289 else \ 290 { \ 291 (__HANDLE__)->Mask = 0x00FFU ; \ 292 } \ 293 } \ 294 else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ 295 { \ 296 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 297 { \ 298 (__HANDLE__)->Mask = 0x00FFU ; \ 299 } \ 300 else \ 301 { \ 302 (__HANDLE__)->Mask = 0x007FU ; \ 303 } \ 304 } \ 305 else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ 306 { \ 307 if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ 308 { \ 309 (__HANDLE__)->Mask = 0x007FU ; \ 310 } \ 311 else \ 312 { \ 313 (__HANDLE__)->Mask = 0x003FU ; \ 314 } \ 315 } \ 316 else \ 317 { \ 318 (__HANDLE__)->Mask = 0x0000U; \ 319 } \ 320 } while(0U) 321 322 /** 323 * @brief Ensure that UART frame length is valid. 324 * @param __LENGTH__ UART frame length. 325 * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) 326 */ 327 #define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ 328 ((__LENGTH__) == UART_WORDLENGTH_8B) || \ 329 ((__LENGTH__) == UART_WORDLENGTH_9B)) 330 331 /** 332 * @brief Ensure that UART wake-up address length is valid. 333 * @param __ADDRESS__ UART wake-up address length. 334 * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) 335 */ 336 #define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ 337 ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) 338 339 /** 340 * @brief Ensure that UART TXFIFO threshold level is valid. 341 * @param __THRESHOLD__ UART TXFIFO threshold level. 342 * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) 343 */ 344 #define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ 345 ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ 346 ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ 347 ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ 348 ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ 349 ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) 350 351 /** 352 * @brief Ensure that UART RXFIFO threshold level is valid. 353 * @param __THRESHOLD__ UART RXFIFO threshold level. 354 * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) 355 */ 356 #define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ 357 ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ 358 ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ 359 ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ 360 ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ 361 ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) 362 363 /** 364 * @} 365 */ 366 367 /* Private functions ---------------------------------------------------------*/ 368 369 /** 370 * @} 371 */ 372 373 /** 374 * @} 375 */ 376 377 #ifdef __cplusplus 378 } 379 #endif 380 381 #endif /* STM32WLxx_HAL_UART_EX_H */ 382 383
