1 /** 2 ****************************************************************************** 3 * @file stm32wbxx_hal_usart_ex.h 4 * @author MCD Application Team 5 * @brief Header file of USART HAL Extended module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32WBxx_HAL_USART_EX_H 21 #define STM32WBxx_HAL_USART_EX_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32wbxx_hal_def.h" 29 30 /** @addtogroup STM32WBxx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup USARTEx 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /* Exported constants --------------------------------------------------------*/ 40 /** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants 41 * @{ 42 */ 43 44 /** @defgroup USARTEx_Word_Length USARTEx Word Length 45 * @{ 46 */ 47 #define USART_WORDLENGTH_7B (USART_CR1_M1) /*!< 7-bit long USART frame */ 48 #define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */ 49 #define USART_WORDLENGTH_9B (USART_CR1_M0) /*!< 9-bit long USART frame */ 50 /** 51 * @} 52 */ 53 54 /** @defgroup USARTEx_Slave_Select_management USARTEx Slave Select Management 55 * @{ 56 */ 57 #define USART_NSS_HARD 0x00000000U /*!< SPI slave selection depends on NSS input pin */ 58 #define USART_NSS_SOFT USART_CR2_DIS_NSS /*!< SPI slave is always selected and NSS input pin is ignored */ 59 /** 60 * @} 61 */ 62 63 64 /** @defgroup USARTEx_Slave_Mode USARTEx Synchronous Slave mode enable 65 * @brief USART SLAVE mode 66 * @{ 67 */ 68 #define USART_SLAVEMODE_DISABLE 0x00000000U /*!< USART SPI Slave Mode Enable */ 69 #define USART_SLAVEMODE_ENABLE USART_CR2_SLVEN /*!< USART SPI Slave Mode Disable */ 70 /** 71 * @} 72 */ 73 74 /** @defgroup USARTEx_FIFO_mode USARTEx FIFO mode 75 * @brief USART FIFO mode 76 * @{ 77 */ 78 #define USART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ 79 #define USART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ 80 /** 81 * @} 82 */ 83 84 /** @defgroup USARTEx_TXFIFO_threshold_level USARTEx TXFIFO threshold level 85 * @brief USART TXFIFO level 86 * @{ 87 */ 88 #define USART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ 89 #define USART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ 90 #define USART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ 91 #define USART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ 92 #define USART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ 93 #define USART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ 94 /** 95 * @} 96 */ 97 98 /** @defgroup USARTEx_RXFIFO_threshold_level USARTEx RXFIFO threshold level 99 * @brief USART RXFIFO level 100 * @{ 101 */ 102 #define USART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ 103 #define USART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ 104 #define USART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ 105 #define USART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ 106 #define USART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ 107 #define USART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ 108 /** 109 * @} 110 */ 111 112 /** 113 * @} 114 */ 115 116 /* Private macros ------------------------------------------------------------*/ 117 /** @defgroup USARTEx_Private_Macros USARTEx Private Macros 118 * @{ 119 */ 120 121 /** @brief Compute the USART mask to apply to retrieve the received data 122 * according to the word length and to the parity bits activation. 123 * @note If PCE = 1, the parity bit is not included in the data extracted 124 * by the reception API(). 125 * This masking operation is not carried out in the case of 126 * DMA transfers. 127 * @param __HANDLE__ specifies the USART Handle. 128 * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field. 129 */ 130 #define USART_MASK_COMPUTATION(__HANDLE__) \ 131 do { \ 132 if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \ 133 { \ 134 if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ 135 { \ 136 (__HANDLE__)->Mask = 0x01FFU; \ 137 } \ 138 else \ 139 { \ 140 (__HANDLE__)->Mask = 0x00FFU; \ 141 } \ 142 } \ 143 else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \ 144 { \ 145 if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ 146 { \ 147 (__HANDLE__)->Mask = 0x00FFU; \ 148 } \ 149 else \ 150 { \ 151 (__HANDLE__)->Mask = 0x007FU; \ 152 } \ 153 } \ 154 else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \ 155 { \ 156 if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ 157 { \ 158 (__HANDLE__)->Mask = 0x007FU; \ 159 } \ 160 else \ 161 { \ 162 (__HANDLE__)->Mask = 0x003FU; \ 163 } \ 164 } \ 165 else \ 166 { \ 167 (__HANDLE__)->Mask = 0x0000U; \ 168 } \ 169 } while(0U) 170 171 /** 172 * @brief Ensure that USART frame length is valid. 173 * @param __LENGTH__ USART frame length. 174 * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) 175 */ 176 #define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \ 177 ((__LENGTH__) == USART_WORDLENGTH_8B) || \ 178 ((__LENGTH__) == USART_WORDLENGTH_9B)) 179 180 /** 181 * @brief Ensure that USART Negative Slave Select (NSS) pin management is valid. 182 * @param __NSS__ USART Negative Slave Select pin management. 183 * @retval SET (__NSS__ is valid) or RESET (__NSS__ is invalid) 184 */ 185 #define IS_USART_NSS(__NSS__) (((__NSS__) == USART_NSS_HARD) || \ 186 ((__NSS__) == USART_NSS_SOFT)) 187 188 /** 189 * @brief Ensure that USART Slave Mode is valid. 190 * @param __STATE__ USART Slave Mode. 191 * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) 192 */ 193 #define IS_USART_SLAVEMODE(__STATE__) (((__STATE__) == USART_SLAVEMODE_DISABLE ) || \ 194 ((__STATE__) == USART_SLAVEMODE_ENABLE)) 195 196 /** 197 * @brief Ensure that USART FIFO mode is valid. 198 * @param __STATE__ USART FIFO mode. 199 * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) 200 */ 201 #define IS_USART_FIFO_MODE_STATE(__STATE__) (((__STATE__) == USART_FIFOMODE_DISABLE ) || \ 202 ((__STATE__) == USART_FIFOMODE_ENABLE)) 203 204 /** 205 * @brief Ensure that USART TXFIFO threshold level is valid. 206 * @param __THRESHOLD__ USART TXFIFO threshold level. 207 * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) 208 */ 209 #define IS_USART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_8) || \ 210 ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_4) || \ 211 ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_2) || \ 212 ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_3_4) || \ 213 ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_7_8) || \ 214 ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_8_8)) 215 216 /** 217 * @brief Ensure that USART RXFIFO threshold level is valid. 218 * @param __THRESHOLD__ USART RXFIFO threshold level. 219 * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) 220 */ 221 #define IS_USART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_8) || \ 222 ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_4) || \ 223 ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_2) || \ 224 ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_3_4) || \ 225 ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_7_8) || \ 226 ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_8_8)) 227 /** 228 * @} 229 */ 230 231 /* Exported functions --------------------------------------------------------*/ 232 /** @addtogroup USARTEx_Exported_Functions 233 * @{ 234 */ 235 236 /** @addtogroup USARTEx_Exported_Functions_Group1 237 * @{ 238 */ 239 240 /* IO operation functions *****************************************************/ 241 void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart); 242 void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart); 243 244 /** 245 * @} 246 */ 247 248 /** @addtogroup USARTEx_Exported_Functions_Group2 249 * @{ 250 */ 251 252 /* Peripheral Control functions ***********************************************/ 253 HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart); 254 HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart); 255 HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig); 256 HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart); 257 HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart); 258 HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); 259 HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); 260 261 /** 262 * @} 263 */ 264 265 /** 266 * @} 267 */ 268 269 /** 270 * @} 271 */ 272 273 /** 274 * @} 275 */ 276 277 #ifdef __cplusplus 278 } 279 #endif 280 281 #endif /* STM32WBxx_HAL_USART_EX_H */ 282 283
