1 /** 2 ****************************************************************************** 3 * @file stm32wbxx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32WBxx_HAL_CONF_H 21 #define STM32WBxx_HAL_CONF_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Exported types ------------------------------------------------------------*/ 28 /* Exported constants --------------------------------------------------------*/ 29 30 /* ########################## Module Selection ############################## */ 31 /** 32 * @brief This is the list of modules to be used in the HAL driver 33 */ 34 #define HAL_MODULE_ENABLED 35 #define HAL_ADC_MODULE_ENABLED 36 #define HAL_COMP_MODULE_ENABLED 37 #define HAL_CORTEX_MODULE_ENABLED 38 #define HAL_CRC_MODULE_ENABLED 39 #define HAL_CRYP_MODULE_ENABLED 40 #define HAL_DMA_MODULE_ENABLED 41 #define HAL_EXTI_MODULE_ENABLED 42 #define HAL_FLASH_MODULE_ENABLED 43 #define HAL_GPIO_MODULE_ENABLED 44 #define HAL_HSEM_MODULE_ENABLED 45 #define HAL_I2C_MODULE_ENABLED 46 #define HAL_IPCC_MODULE_ENABLED 47 #define HAL_IRDA_MODULE_ENABLED 48 #define HAL_IWDG_MODULE_ENABLED 49 #define HAL_LCD_MODULE_ENABLED 50 #define HAL_LPTIM_MODULE_ENABLED 51 #define HAL_PCD_MODULE_ENABLED 52 #define HAL_PKA_MODULE_ENABLED 53 #define HAL_PWR_MODULE_ENABLED 54 #define HAL_QSPI_MODULE_ENABLED 55 #define HAL_RCC_MODULE_ENABLED 56 #define HAL_RNG_MODULE_ENABLED 57 #define HAL_RTC_MODULE_ENABLED 58 #define HAL_SAI_MODULE_ENABLED 59 #define HAL_SMARTCARD_MODULE_ENABLED 60 #define HAL_SMBUS_MODULE_ENABLED 61 #define HAL_SPI_MODULE_ENABLED 62 #define HAL_TIM_MODULE_ENABLED 63 #define HAL_TSC_MODULE_ENABLED 64 #define HAL_UART_MODULE_ENABLED 65 #define HAL_USART_MODULE_ENABLED 66 #define HAL_WWDG_MODULE_ENABLED 67 68 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 69 #define USE_HAL_COMP_REGISTER_CALLBACKS 0u 70 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u 71 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 72 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u 73 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u 74 #define USE_HAL_PCD_REGISTER_CALLBACKS 0u 75 #define USE_HAL_PKA_REGISTER_CALLBACKS 0u 76 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0u 77 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 78 #define USE_HAL_RTC_REGISTER_CALLBACKS 0u 79 #define USE_HAL_SAI_REGISTER_CALLBACKS 0u 80 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u 81 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u 82 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 83 #define USE_HAL_TIM_REGISTER_CALLBACKS 0u 84 #define USE_HAL_TSC_REGISTER_CALLBACKS 0u 85 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 86 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 87 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 88 89 #define USE_HAL_CRYP_SUSPEND_RESUME 0u 90 91 /* ########################## Oscillator Values adaptation ####################*/ 92 /** 93 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 94 * This value is used by the RCC HAL module to compute the system frequency 95 * (when HSE is used as system clock source, directly or through the PLL). 96 */ 97 98 #if !defined (HSE_VALUE) 99 #define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */ 100 #endif /* HSE_VALUE */ 101 102 #if !defined (HSE_STARTUP_TIMEOUT) 103 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 104 #endif /* HSE_STARTUP_TIMEOUT */ 105 106 /** 107 * @brief Internal Multiple Speed oscillator (MSI) default value. 108 * This value is the default MSI range value after Reset. 109 */ 110 #if !defined (MSI_VALUE) 111 #define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ 112 #endif /* MSI_VALUE */ 113 114 /** 115 * @brief Internal High Speed oscillator (HSI) value. 116 * This value is used by the RCC HAL module to compute the system frequency 117 * (when HSI is used as system clock source, directly or through the PLL). 118 */ 119 #if !defined (HSI_VALUE) 120 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 121 #endif /* HSI_VALUE */ 122 123 /** 124 * @brief Internal Low Speed oscillator (LSI1) value. 125 */ 126 #if !defined (LSI1_VALUE) 127 #define LSI1_VALUE (32000UL) /*!< LSI1 Typical Value in Hz*/ 128 #endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 129 The real value may vary depending on the variations 130 in voltage and temperature.*/ 131 /** 132 * @brief Internal Low Speed oscillator (LSI2) value. 133 */ 134 #if !defined (LSI2_VALUE) 135 #define LSI2_VALUE (32000UL) /*!< LSI2 Typical Value in Hz*/ 136 #endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 137 The real value may vary depending on the variations 138 in voltage and temperature.*/ 139 140 /** 141 * @brief External Low Speed oscillator (LSE) value. 142 * This value is used by the UART, RTC HAL module to compute the system frequency 143 */ 144 #if !defined (LSE_VALUE) 145 #if defined(STM32WB5Mxx) 146 #define LSE_VALUE (32774UL) /*!< Value of the LSE oscillator in Hz */ 147 #else 148 #define LSE_VALUE (32768UL) /*!< Value of the LSE oscillator in Hz */ 149 #endif /* STM32WB5Mxx */ 150 #endif /* LSE_VALUE */ 151 152 /** 153 * @brief Internal Multiple Speed oscillator (HSI48) default value. 154 * This value is the default HSI48 range value after Reset. 155 */ 156 #if !defined (HSI48_VALUE) 157 #define HSI48_VALUE (48000000UL) /*!< Value of the Internal oscillator in Hz*/ 158 #endif /* HSI48_VALUE */ 159 160 #if !defined (LSE_STARTUP_TIMEOUT) 161 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 162 #endif /* LSE_STARTUP_TIMEOUT */ 163 164 /** 165 * @brief External clock source for SAI1 peripheral 166 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 167 * frequency. 168 */ 169 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 170 #define EXTERNAL_SAI1_CLOCK_VALUE (48000UL) /*!< Value of the SAI1 External clock source in Hz*/ 171 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 172 173 /* Tip: To avoid modifying this file each time you need to use different HSE, 174 === you can define the HSE value in your toolchain compiler preprocessor. */ 175 176 /* ########################### System Configuration ######################### */ 177 /** 178 * @brief This is the HAL system configuration section 179 */ 180 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 181 #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ 182 #define USE_RTOS 0U 183 #define PREFETCH_ENABLE 0U 184 #define INSTRUCTION_CACHE_ENABLE 1U 185 #define DATA_CACHE_ENABLE 1U 186 187 /* ########################## Assert Selection ############################## */ 188 /** 189 * @brief Uncomment the line below to expanse the "assert_param" macro in the 190 * HAL drivers code 191 */ 192 /* #define USE_FULL_ASSERT 1U */ 193 194 /* ################## SPI peripheral configuration ########################## */ 195 196 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 197 * Activated: CRC code is present inside driver 198 * Deactivated: CRC code cleaned from driver 199 */ 200 201 #define USE_SPI_CRC 1U 202 203 /* Includes ------------------------------------------------------------------*/ 204 /** 205 * @brief Include module's header file 206 */ 207 #ifdef HAL_DMA_MODULE_ENABLED 208 #include "stm32wbxx_hal_dma.h" 209 #endif /* HAL_DMA_MODULE_ENABLED */ 210 211 #ifdef HAL_ADC_MODULE_ENABLED 212 #include "stm32wbxx_hal_adc.h" 213 #endif /* HAL_ADC_MODULE_ENABLED */ 214 215 #ifdef HAL_COMP_MODULE_ENABLED 216 #include "stm32wbxx_hal_comp.h" 217 #endif /* HAL_COMP_MODULE_ENABLED */ 218 219 #ifdef HAL_CORTEX_MODULE_ENABLED 220 #include "stm32wbxx_hal_cortex.h" 221 #endif /* HAL_CORTEX_MODULE_ENABLED */ 222 223 #ifdef HAL_CRC_MODULE_ENABLED 224 #include "stm32wbxx_hal_crc.h" 225 #endif /* HAL_CRC_MODULE_ENABLED */ 226 227 #ifdef HAL_CRYP_MODULE_ENABLED 228 #include "stm32wbxx_hal_cryp.h" 229 #endif /* HAL_CRYP_MODULE_ENABLED */ 230 231 #ifdef HAL_EXTI_MODULE_ENABLED 232 #include "stm32wbxx_hal_exti.h" 233 #endif /* HAL_EXTI_MODULE_ENABLED */ 234 235 #ifdef HAL_FLASH_MODULE_ENABLED 236 #include "stm32wbxx_hal_flash.h" 237 #endif /* HAL_FLASH_MODULE_ENABLED */ 238 239 #ifdef HAL_GPIO_MODULE_ENABLED 240 #include "stm32wbxx_hal_gpio.h" 241 #endif /* HAL_GPIO_MODULE_ENABLED */ 242 243 #ifdef HAL_HSEM_MODULE_ENABLED 244 #include "stm32wbxx_hal_hsem.h" 245 #endif /* HAL_HSEM_MODULE_ENABLED */ 246 247 #ifdef HAL_I2C_MODULE_ENABLED 248 #include "stm32wbxx_hal_i2c.h" 249 #endif /* HAL_I2C_MODULE_ENABLED */ 250 251 #ifdef HAL_IPCC_MODULE_ENABLED 252 #include "stm32wbxx_hal_ipcc.h" 253 #endif /* HAL_IPCC_MODULE_ENABLED */ 254 255 #ifdef HAL_IRDA_MODULE_ENABLED 256 #include "stm32wbxx_hal_irda.h" 257 #endif /* HAL_IRDA_MODULE_ENABLED */ 258 259 #ifdef HAL_IWDG_MODULE_ENABLED 260 #include "stm32wbxx_hal_iwdg.h" 261 #endif /* HAL_IWDG_MODULE_ENABLED */ 262 263 #ifdef HAL_LCD_MODULE_ENABLED 264 #include "stm32wbxx_hal_lcd.h" 265 #endif /* HAL_LCD_MODULE_ENABLED */ 266 267 #ifdef HAL_LPTIM_MODULE_ENABLED 268 #include "stm32wbxx_hal_lptim.h" 269 #endif /* HAL_LPTIM_MODULE_ENABLED */ 270 271 #ifdef HAL_PCD_MODULE_ENABLED 272 #include "stm32wbxx_hal_pcd.h" 273 #endif /* HAL_PCD_MODULE_ENABLED */ 274 275 #ifdef HAL_PKA_MODULE_ENABLED 276 #include "stm32wbxx_hal_pka.h" 277 #endif /* HAL_PKA_MODULE_ENABLED */ 278 279 #ifdef HAL_PWR_MODULE_ENABLED 280 #include "stm32wbxx_hal_pwr.h" 281 #endif /* HAL_PWR_MODULE_ENABLED */ 282 283 #ifdef HAL_QSPI_MODULE_ENABLED 284 #include "stm32wbxx_hal_qspi.h" 285 #endif /* HAL_QSPI_MODULE_ENABLED */ 286 287 #ifdef HAL_RCC_MODULE_ENABLED 288 #include "stm32wbxx_hal_rcc.h" 289 #endif /* HAL_RCC_MODULE_ENABLED */ 290 291 #ifdef HAL_RNG_MODULE_ENABLED 292 #include "stm32wbxx_hal_rng.h" 293 #endif /* HAL_RNG_MODULE_ENABLED */ 294 295 #ifdef HAL_RTC_MODULE_ENABLED 296 #include "stm32wbxx_hal_rtc.h" 297 #endif /* HAL_RTC_MODULE_ENABLED */ 298 299 #ifdef HAL_SAI_MODULE_ENABLED 300 #include "stm32wbxx_hal_sai.h" 301 #endif /* HAL_SAI_MODULE_ENABLED */ 302 303 #ifdef HAL_SMARTCARD_MODULE_ENABLED 304 #include "stm32wbxx_hal_smartcard.h" 305 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 306 307 #ifdef HAL_SMBUS_MODULE_ENABLED 308 #include "stm32wbxx_hal_smbus.h" 309 #endif /* HAL_SMBUS_MODULE_ENABLED */ 310 311 #ifdef HAL_SPI_MODULE_ENABLED 312 #include "stm32wbxx_hal_spi.h" 313 #endif /* HAL_SPI_MODULE_ENABLED */ 314 315 #ifdef HAL_TIM_MODULE_ENABLED 316 #include "stm32wbxx_hal_tim.h" 317 #endif /* HAL_TIM_MODULE_ENABLED */ 318 319 #ifdef HAL_TSC_MODULE_ENABLED 320 #include "stm32wbxx_hal_tsc.h" 321 #endif /* HAL_TSC_MODULE_ENABLED */ 322 323 #ifdef HAL_UART_MODULE_ENABLED 324 #include "stm32wbxx_hal_uart.h" 325 #endif /* HAL_UART_MODULE_ENABLED */ 326 327 #ifdef HAL_USART_MODULE_ENABLED 328 #include "stm32wbxx_hal_usart.h" 329 #endif /* HAL_USART_MODULE_ENABLED */ 330 331 #ifdef HAL_WWDG_MODULE_ENABLED 332 #include "stm32wbxx_hal_wwdg.h" 333 #endif /* HAL_WWDG_MODULE_ENABLED */ 334 335 /* Exported macro ------------------------------------------------------------*/ 336 #ifdef USE_FULL_ASSERT 337 /** 338 * @brief The assert_param macro is used for function's parameters check. 339 * @param expr If expr is false, it calls assert_failed function 340 * which reports the name of the source file and the source 341 * line number of the call that failed. 342 * If expr is true, it returns no value. 343 * @retval None 344 */ 345 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 346 /* Exported functions ------------------------------------------------------- */ 347 void assert_failed(uint8_t *file, uint32_t line); 348 #else 349 #define assert_param(expr) ((void)0U) 350 #endif /* USE_FULL_ASSERT */ 351 352 #ifdef __cplusplus 353 } 354 #endif 355 356 #endif /* STM32WBxx_HAL_CONF_H */ 357
