1 /** 2 ****************************************************************************** 3 * @file stm32l1xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32l1xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * Copyright (c) 2017 STMicroelectronics. 12 * All rights reserved. 13 * 14 * This software is licensed under terms that can be found in the LICENSE file 15 * in the root directory of this software component. 16 * If no LICENSE file comes with this software, it is provided AS-IS. 17 * 18 ****************************************************************************** 19 */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef __STM32L1xx_HAL_CONF_H 23 #define __STM32L1xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 * 36 * Note: 37 * HAL_I2C_MODULE_ENABLED had to be disabled due to the HAL 38 * redefining I2C_SPEED_STANDARD and I2C_SPEED_FAST when the 39 * I2C LL driver was enabled. 40 * 41 */ 42 #define HAL_MODULE_ENABLED 43 #define HAL_ADC_MODULE_ENABLED 44 #define HAL_COMP_MODULE_ENABLED 45 #define HAL_CORTEX_MODULE_ENABLED 46 #define HAL_CRC_MODULE_ENABLED 47 #define HAL_CRYP_MODULE_ENABLED 48 #define HAL_DAC_MODULE_ENABLED 49 #define HAL_DMA_MODULE_ENABLED 50 #define HAL_FLASH_MODULE_ENABLED 51 #define HAL_GPIO_MODULE_ENABLED 52 #define HAL_EXTI_MODULE_ENABLED 53 /* #define HAL_I2C_MODULE_ENABLED */ 54 #define HAL_I2S_MODULE_ENABLED 55 #define HAL_IRDA_MODULE_ENABLED 56 #define HAL_IWDG_MODULE_ENABLED 57 #define HAL_LCD_MODULE_ENABLED 58 #define HAL_NOR_MODULE_ENABLED 59 #define HAL_OPAMP_MODULE_ENABLED 60 #define HAL_PCD_MODULE_ENABLED 61 #define HAL_PWR_MODULE_ENABLED 62 #define HAL_RCC_MODULE_ENABLED 63 #define HAL_RTC_MODULE_ENABLED 64 #define HAL_SD_MODULE_ENABLED 65 #define HAL_SMARTCARD_MODULE_ENABLED 66 #define HAL_SMBUS_MODULE_ENABLED 67 #define HAL_SPI_MODULE_ENABLED 68 #define HAL_SRAM_MODULE_ENABLED 69 #define HAL_TIM_MODULE_ENABLED 70 #define HAL_UART_MODULE_ENABLED 71 #define HAL_USART_MODULE_ENABLED 72 #define HAL_WWDG_MODULE_ENABLED 73 74 /* ########################## Oscillator Values adaptation ####################*/ 75 /** 76 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 77 * This value is used by the RCC HAL module to compute the system frequency 78 * (when HSE is used as system clock source, directly or through the PLL). 79 */ 80 #if !defined (HSE_VALUE) 81 #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ 82 #endif /* HSE_VALUE */ 83 84 #if !defined (HSE_STARTUP_TIMEOUT) 85 #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ 86 #endif /* HSE_STARTUP_TIMEOUT */ 87 88 /** 89 * @brief Internal Multiple Speed oscillator (MSI) default value. 90 * This value is the default MSI range value after Reset. 91 */ 92 #if !defined (MSI_VALUE) 93 #define MSI_VALUE (2097000U) /*!< Value of the Internal oscillator in Hz*/ 94 #endif /* MSI_VALUE */ 95 /** 96 * @brief Internal High Speed oscillator (HSI) value. 97 * This value is used by the RCC HAL module to compute the system frequency 98 * (when HSI is used as system clock source, directly or through the PLL). 99 */ 100 #if !defined (HSI_VALUE) 101 #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ 102 #endif /* HSI_VALUE */ 103 104 /** 105 * @brief Internal Low Speed oscillator (LSI) value. 106 */ 107 #if !defined (LSI_VALUE) 108 #define LSI_VALUE (37000U) /*!< LSI Typical Value in Hz*/ 109 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 110 The real value may vary depending on the variations 111 in voltage and temperature.*/ 112 113 /** 114 * @brief External Low Speed oscillator (LSE) value. 115 */ 116 #if !defined (LSE_VALUE) 117 #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz*/ 118 #endif /* LSE_VALUE */ 119 120 /** 121 * @brief Time out for LSE start up value in ms. 122 */ 123 #if !defined (LSE_STARTUP_TIMEOUT) 124 #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ 125 #endif /* LSE_STARTUP_TIMEOUT */ 126 127 128 /* Tip: To avoid modifying this file each time you need to use different HSE, 129 === you can define the HSE value in your toolchain compiler preprocessor. */ 130 131 /* ########################### System Configuration ######################### */ 132 /** 133 * @brief This is the HAL system configuration section 134 */ 135 #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ 136 #define TICK_INT_PRIORITY (0x000FU) /*!< tick interrupt priority */ 137 #define USE_RTOS 0U 138 #define PREFETCH_ENABLE 1U 139 #define INSTRUCTION_CACHE_ENABLE 0U 140 #define DATA_CACHE_ENABLE 0U 141 142 /* ########################## Assert Selection ############################## */ 143 /** 144 * @brief Uncomment the line below to expanse the "assert_param" macro in the 145 * HAL drivers code 146 */ 147 /*#define USE_FULL_ASSERT 1U*/ 148 149 /* ################## Register callback feature configuration ############### */ 150 /** 151 * @brief Set below the peripheral configuration to "1U" to add the support 152 * of HAL callback registration/deregistration feature for the HAL 153 * driver(s). This allows user application to provide specific callback 154 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 155 * the default weak callback functions (see each stm32l0xx_hal_ppp.h file 156 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 157 * for each PPP peripheral). 158 */ 159 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 160 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 161 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 162 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 163 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 164 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 165 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 166 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 167 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 168 #define USE_HAL_SDMMC_REGISTER_CALLBACKS 0U 169 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 170 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 171 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 172 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 173 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 174 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 175 176 /* ################## SPI peripheral configuration ########################## */ 177 178 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 179 * Activated: CRC code is present inside driver 180 * Deactivated: CRC code cleaned from driver 181 */ 182 183 #define USE_SPI_CRC 1U 184 185 /* Includes ------------------------------------------------------------------*/ 186 /** 187 * @brief Include module's header file 188 */ 189 190 #ifdef HAL_RCC_MODULE_ENABLED 191 #include "stm32l1xx_hal_rcc.h" 192 #endif /* HAL_RCC_MODULE_ENABLED */ 193 194 #ifdef HAL_GPIO_MODULE_ENABLED 195 #include "stm32l1xx_hal_gpio.h" 196 #endif /* HAL_GPIO_MODULE_ENABLED */ 197 198 #ifdef HAL_EXTI_MODULE_ENABLED 199 #include "stm32l1xx_hal_exti.h" 200 #endif /* HAL_EXTI_MODULE_ENABLED */ 201 202 #ifdef HAL_DMA_MODULE_ENABLED 203 #include "stm32l1xx_hal_dma.h" 204 #endif /* HAL_DMA_MODULE_ENABLED */ 205 206 #ifdef HAL_CORTEX_MODULE_ENABLED 207 #include "stm32l1xx_hal_cortex.h" 208 #endif /* HAL_CORTEX_MODULE_ENABLED */ 209 210 #ifdef HAL_ADC_MODULE_ENABLED 211 #include "stm32l1xx_hal_adc.h" 212 #endif /* HAL_ADC_MODULE_ENABLED */ 213 214 #ifdef HAL_COMP_MODULE_ENABLED 215 #include "stm32l1xx_hal_comp.h" 216 #endif /* HAL_COMP_MODULE_ENABLED */ 217 218 #ifdef HAL_CRC_MODULE_ENABLED 219 #include "stm32l1xx_hal_crc.h" 220 #endif /* HAL_CRC_MODULE_ENABLED */ 221 222 #ifdef HAL_CRYP_MODULE_ENABLED 223 #include "stm32l1xx_hal_cryp.h" 224 #endif /* HAL_CRYP_MODULE_ENABLED */ 225 226 #ifdef HAL_DAC_MODULE_ENABLED 227 #include "stm32l1xx_hal_dac.h" 228 #endif /* HAL_DAC_MODULE_ENABLED */ 229 230 #ifdef HAL_FLASH_MODULE_ENABLED 231 #include "stm32l1xx_hal_flash.h" 232 #endif /* HAL_FLASH_MODULE_ENABLED */ 233 234 #ifdef HAL_SRAM_MODULE_ENABLED 235 #include "stm32l1xx_hal_sram.h" 236 #endif /* HAL_SRAM_MODULE_ENABLED */ 237 238 #ifdef HAL_NOR_MODULE_ENABLED 239 #include "stm32l1xx_hal_nor.h" 240 #endif /* HAL_NOR_MODULE_ENABLED */ 241 242 #ifdef HAL_I2C_MODULE_ENABLED 243 #include "stm32l1xx_hal_i2c.h" 244 #endif /* HAL_I2C_MODULE_ENABLED */ 245 246 #ifdef HAL_I2S_MODULE_ENABLED 247 #include "stm32l1xx_hal_i2s.h" 248 #endif /* HAL_I2S_MODULE_ENABLED */ 249 250 #ifdef HAL_IWDG_MODULE_ENABLED 251 #include "stm32l1xx_hal_iwdg.h" 252 #endif /* HAL_IWDG_MODULE_ENABLED */ 253 254 #ifdef HAL_LCD_MODULE_ENABLED 255 #include "stm32l1xx_hal_lcd.h" 256 #endif /* HAL_LCD_MODULE_ENABLED */ 257 258 #ifdef HAL_OPAMP_MODULE_ENABLED 259 #include "stm32l1xx_hal_opamp.h" 260 #endif /* HAL_OPAMP_MODULE_ENABLED */ 261 262 #ifdef HAL_PWR_MODULE_ENABLED 263 #include "stm32l1xx_hal_pwr.h" 264 #endif /* HAL_PWR_MODULE_ENABLED */ 265 266 #ifdef HAL_RTC_MODULE_ENABLED 267 #include "stm32l1xx_hal_rtc.h" 268 #endif /* HAL_RTC_MODULE_ENABLED */ 269 270 #ifdef HAL_SD_MODULE_ENABLED 271 #include "stm32l1xx_hal_sd.h" 272 #endif /* HAL_SD_MODULE_ENABLED */ 273 274 #ifdef HAL_SMBUS_MODULE_ENABLED 275 #include "stm32l1xx_hal_smbus.h" 276 #endif /* HAL_SMBUS_MODULE_ENABLED */ 277 278 #ifdef HAL_SPI_MODULE_ENABLED 279 #include "stm32l1xx_hal_spi.h" 280 #endif /* HAL_SPI_MODULE_ENABLED */ 281 282 #ifdef HAL_TIM_MODULE_ENABLED 283 #include "stm32l1xx_hal_tim.h" 284 #endif /* HAL_TIM_MODULE_ENABLED */ 285 286 #ifdef HAL_UART_MODULE_ENABLED 287 #include "stm32l1xx_hal_uart.h" 288 #endif /* HAL_UART_MODULE_ENABLED */ 289 290 #ifdef HAL_USART_MODULE_ENABLED 291 #include "stm32l1xx_hal_usart.h" 292 #endif /* HAL_USART_MODULE_ENABLED */ 293 294 #ifdef HAL_IRDA_MODULE_ENABLED 295 #include "stm32l1xx_hal_irda.h" 296 #endif /* HAL_IRDA_MODULE_ENABLED */ 297 298 #ifdef HAL_SMARTCARD_MODULE_ENABLED 299 #include "stm32l1xx_hal_smartcard.h" 300 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 301 302 #ifdef HAL_WWDG_MODULE_ENABLED 303 #include "stm32l1xx_hal_wwdg.h" 304 #endif /* HAL_WWDG_MODULE_ENABLED */ 305 306 #ifdef HAL_PCD_MODULE_ENABLED 307 #include "stm32l1xx_hal_pcd.h" 308 #endif /* HAL_PCD_MODULE_ENABLED */ 309 310 /* Exported macro ------------------------------------------------------------*/ 311 #ifdef USE_FULL_ASSERT 312 /** 313 * @brief The assert_param macro is used for function's parameters check. 314 * @param expr If expr is false, it calls assert_failed function 315 * which reports the name of the source file and the source 316 * line number of the call that failed. 317 * If expr is true, it returns no value. 318 * @retval None 319 */ 320 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 321 /* Exported functions ------------------------------------------------------- */ 322 void assert_failed(uint8_t* file, uint32_t line); 323 #else 324 #define assert_param(expr) ((void)0U) 325 #endif /* USE_FULL_ASSERT */ 326 327 #ifdef __cplusplus 328 } 329 #endif 330 331 #endif /* __STM32L1xx_HAL_CONF_H */ 332 333 334
