1 /** 2 ****************************************************************************** 3 * @file stm32g4xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32g4xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * Copyright (c) 2019 STMicroelectronics. 12 * All rights reserved. 13 * 14 * This software is licensed under terms that can be found in the LICENSE file 15 * in the root directory of this software component. 16 * If no LICENSE file comes with this software, it is provided AS-IS. 17 * 18 ****************************************************************************** 19 */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef STM32G4xx_HAL_CONF_H 23 #define STM32G4xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 */ 36 #define HAL_MODULE_ENABLED 37 #define HAL_ADC_MODULE_ENABLED 38 #define HAL_COMP_MODULE_ENABLED 39 #define HAL_CORDIC_MODULE_ENABLED 40 #define HAL_CORTEX_MODULE_ENABLED 41 #define HAL_CRC_MODULE_ENABLED 42 #define HAL_CRYP_MODULE_ENABLED 43 #define HAL_DAC_MODULE_ENABLED 44 #define HAL_DMA_MODULE_ENABLED 45 #define HAL_EXTI_MODULE_ENABLED 46 #define HAL_FDCAN_MODULE_ENABLED 47 #define HAL_FLASH_MODULE_ENABLED 48 #define HAL_FMAC_MODULE_ENABLED 49 #define HAL_GPIO_MODULE_ENABLED 50 #define HAL_HRTIM_MODULE_ENABLED 51 #define HAL_IRDA_MODULE_ENABLED 52 #define HAL_IWDG_MODULE_ENABLED 53 #define HAL_I2C_MODULE_ENABLED 54 #define HAL_I2S_MODULE_ENABLED 55 #define HAL_LPTIM_MODULE_ENABLED 56 #define HAL_NAND_MODULE_ENABLED 57 #define HAL_NOR_MODULE_ENABLED 58 #define HAL_OPAMP_MODULE_ENABLED 59 #define HAL_PCD_MODULE_ENABLED 60 #define HAL_PWR_MODULE_ENABLED 61 #define HAL_QSPI_MODULE_ENABLED 62 #define HAL_RCC_MODULE_ENABLED 63 #define HAL_RNG_MODULE_ENABLED 64 #define HAL_RTC_MODULE_ENABLED 65 #define HAL_SAI_MODULE_ENABLED 66 #define HAL_SMARTCARD_MODULE_ENABLED 67 #define HAL_SMBUS_MODULE_ENABLED 68 #define HAL_SPI_MODULE_ENABLED 69 #define HAL_SRAM_MODULE_ENABLED 70 #define HAL_TIM_MODULE_ENABLED 71 #define HAL_UART_MODULE_ENABLED 72 #define HAL_USART_MODULE_ENABLED 73 #define HAL_WWDG_MODULE_ENABLED 74 75 /* ########################## Register Callbacks selection ############################## */ 76 /** 77 * @brief This is the list of modules where register callback can be used 78 */ 79 80 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U 81 #define USE_HAL_COMP_REGISTER_CALLBACKS 0U 82 #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U 83 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U 84 #define USE_HAL_DAC_REGISTER_CALLBACKS 0U 85 #define USE_HAL_EXTI_REGISTER_CALLBACKS 0U 86 #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U 87 #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U 88 #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U 89 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U 90 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U 91 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U 92 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U 93 #define USE_HAL_NAND_REGISTER_CALLBACKS 0U 94 #define USE_HAL_NOR_REGISTER_CALLBACKS 0U 95 #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U 96 #define USE_HAL_PCD_REGISTER_CALLBACKS 0U 97 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 98 #define USE_HAL_RNG_REGISTER_CALLBACKS 0U 99 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U 100 #define USE_HAL_SAI_REGISTER_CALLBACKS 0U 101 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U 102 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U 103 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U 104 #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U 105 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U 106 #define USE_HAL_UART_REGISTER_CALLBACKS 0U 107 #define USE_HAL_USART_REGISTER_CALLBACKS 0U 108 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U 109 110 /* ########################## Oscillator Values adaptation ####################*/ 111 /** 112 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 113 * This value is used by the RCC HAL module to compute the system frequency 114 * (when HSE is used as system clock source, directly or through the PLL). 115 */ 116 #if !defined (HSE_VALUE) 117 #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ 118 #endif /* HSE_VALUE */ 119 120 #if !defined (HSE_STARTUP_TIMEOUT) 121 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 122 #endif /* HSE_STARTUP_TIMEOUT */ 123 124 /** 125 * @brief Internal High Speed oscillator (HSI) value. 126 * This value is used by the RCC HAL module to compute the system frequency 127 * (when HSI is used as system clock source, directly or through the PLL). 128 */ 129 #if !defined (HSI_VALUE) 130 #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ 131 #endif /* HSI_VALUE */ 132 133 /** 134 * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG. 135 * This internal oscillator is mainly dedicated to provide a high precision clock to 136 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 137 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 138 * which is subject to manufacturing process variations. 139 */ 140 #if !defined (HSI48_VALUE) 141 #define HSI48_VALUE (48000000UL) /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz. 142 The real value my vary depending on manufacturing process variations.*/ 143 #endif /* HSI48_VALUE */ 144 145 /** 146 * @brief Internal Low Speed oscillator (LSI) value. 147 */ 148 #if !defined (LSI_VALUE) 149 /*!< Value of the Internal Low Speed oscillator in Hz 150 The real value may vary depending on the variations in voltage and temperature.*/ 151 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 152 #endif /* LSI_VALUE */ 153 /** 154 * @brief External Low Speed oscillator (LSE) value. 155 * This value is used by the UART, RTC HAL module to compute the system frequency 156 */ 157 #if !defined (LSE_VALUE) 158 #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ 159 #endif /* LSE_VALUE */ 160 161 #if !defined (LSE_STARTUP_TIMEOUT) 162 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 163 #endif /* LSE_STARTUP_TIMEOUT */ 164 165 /** 166 * @brief External clock source for I2S and SAI peripherals 167 * This value is used by the I2S and SAI HAL modules to compute the I2S and SAI clock source 168 * frequency, this source is inserted directly through I2S_CKIN pad. 169 */ 170 #if !defined (EXTERNAL_CLOCK_VALUE) 171 #define EXTERNAL_CLOCK_VALUE (48000UL) /*!< Value of the External clock source in Hz*/ 172 #endif /* EXTERNAL_CLOCK_VALUE */ 173 174 /* Tip: To avoid modifying this file each time you need to use different HSE, 175 === you can define the HSE value in your toolchain compiler preprocessor. */ 176 177 /* ########################### System Configuration ######################### */ 178 /** 179 * @brief This is the HAL system configuration section 180 */ 181 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 182 #define TICK_INT_PRIORITY (0x0FUL) /*!< tick interrupt priority */ 183 #define USE_RTOS 0U 184 #define PREFETCH_ENABLE 0U 185 #define INSTRUCTION_CACHE_ENABLE 1U 186 #define DATA_CACHE_ENABLE 1U 187 188 /* ########################## Assert Selection ############################## */ 189 /** 190 * @brief Uncomment the line below to expanse the "assert_param" macro in the 191 * HAL drivers code 192 */ 193 /* #define USE_FULL_ASSERT 1U */ 194 195 /* ################## SPI peripheral configuration ########################## */ 196 197 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 198 * Activated: CRC code is present inside driver 199 * Deactivated: CRC code cleaned from driver 200 */ 201 202 #define USE_SPI_CRC 1U 203 204 /* Includes ------------------------------------------------------------------*/ 205 /** 206 * @brief Include module's header file 207 */ 208 209 #ifdef HAL_RCC_MODULE_ENABLED 210 #include "stm32g4xx_hal_rcc.h" 211 #endif /* HAL_RCC_MODULE_ENABLED */ 212 213 #ifdef HAL_GPIO_MODULE_ENABLED 214 #include "stm32g4xx_hal_gpio.h" 215 #endif /* HAL_GPIO_MODULE_ENABLED */ 216 217 #ifdef HAL_DMA_MODULE_ENABLED 218 #include "stm32g4xx_hal_dma.h" 219 #endif /* HAL_DMA_MODULE_ENABLED */ 220 221 #ifdef HAL_CORTEX_MODULE_ENABLED 222 #include "stm32g4xx_hal_cortex.h" 223 #endif /* HAL_CORTEX_MODULE_ENABLED */ 224 225 #ifdef HAL_ADC_MODULE_ENABLED 226 #include "stm32g4xx_hal_adc.h" 227 #endif /* HAL_ADC_MODULE_ENABLED */ 228 229 #ifdef HAL_COMP_MODULE_ENABLED 230 #include "stm32g4xx_hal_comp.h" 231 #endif /* HAL_COMP_MODULE_ENABLED */ 232 233 #ifdef HAL_CORDIC_MODULE_ENABLED 234 #include "stm32g4xx_hal_cordic.h" 235 #endif /* HAL_CORDIC_MODULE_ENABLED */ 236 237 #ifdef HAL_CRC_MODULE_ENABLED 238 #include "stm32g4xx_hal_crc.h" 239 #endif /* HAL_CRC_MODULE_ENABLED */ 240 241 #ifdef HAL_CRYP_MODULE_ENABLED 242 #include "stm32g4xx_hal_cryp.h" 243 #endif /* HAL_CRYP_MODULE_ENABLED */ 244 245 #ifdef HAL_DAC_MODULE_ENABLED 246 #include "stm32g4xx_hal_dac.h" 247 #endif /* HAL_DAC_MODULE_ENABLED */ 248 249 #ifdef HAL_EXTI_MODULE_ENABLED 250 #include "stm32g4xx_hal_exti.h" 251 #endif /* HAL_EXTI_MODULE_ENABLED */ 252 253 #ifdef HAL_FDCAN_MODULE_ENABLED 254 #include "stm32g4xx_hal_fdcan.h" 255 #endif /* HAL_FDCAN_MODULE_ENABLED */ 256 257 #ifdef HAL_FLASH_MODULE_ENABLED 258 #include "stm32g4xx_hal_flash.h" 259 #endif /* HAL_FLASH_MODULE_ENABLED */ 260 261 #ifdef HAL_FMAC_MODULE_ENABLED 262 #include "stm32g4xx_hal_fmac.h" 263 #endif /* HAL_FMAC_MODULE_ENABLED */ 264 265 #ifdef HAL_HRTIM_MODULE_ENABLED 266 #include "stm32g4xx_hal_hrtim.h" 267 #endif /* HAL_HRTIM_MODULE_ENABLED */ 268 269 #ifdef HAL_IRDA_MODULE_ENABLED 270 #include "stm32g4xx_hal_irda.h" 271 #endif /* HAL_IRDA_MODULE_ENABLED */ 272 273 #ifdef HAL_IWDG_MODULE_ENABLED 274 #include "stm32g4xx_hal_iwdg.h" 275 #endif /* HAL_IWDG_MODULE_ENABLED */ 276 277 #ifdef HAL_I2C_MODULE_ENABLED 278 #include "stm32g4xx_hal_i2c.h" 279 #endif /* HAL_I2C_MODULE_ENABLED */ 280 281 #ifdef HAL_I2S_MODULE_ENABLED 282 #include "stm32g4xx_hal_i2s.h" 283 #endif /* HAL_I2S_MODULE_ENABLED */ 284 285 #ifdef HAL_LPTIM_MODULE_ENABLED 286 #include "stm32g4xx_hal_lptim.h" 287 #endif /* HAL_LPTIM_MODULE_ENABLED */ 288 289 #ifdef HAL_NAND_MODULE_ENABLED 290 #include "stm32g4xx_hal_nand.h" 291 #endif /* HAL_NAND_MODULE_ENABLED */ 292 293 #ifdef HAL_NOR_MODULE_ENABLED 294 #include "stm32g4xx_hal_nor.h" 295 #endif /* HAL_NOR_MODULE_ENABLED */ 296 297 #ifdef HAL_OPAMP_MODULE_ENABLED 298 #include "stm32g4xx_hal_opamp.h" 299 #endif /* HAL_OPAMP_MODULE_ENABLED */ 300 301 #ifdef HAL_PCD_MODULE_ENABLED 302 #include "stm32g4xx_hal_pcd.h" 303 #endif /* HAL_PCD_MODULE_ENABLED */ 304 305 #ifdef HAL_PWR_MODULE_ENABLED 306 #include "stm32g4xx_hal_pwr.h" 307 #endif /* HAL_PWR_MODULE_ENABLED */ 308 309 #ifdef HAL_QSPI_MODULE_ENABLED 310 #include "stm32g4xx_hal_qspi.h" 311 #endif /* HAL_QSPI_MODULE_ENABLED */ 312 313 #ifdef HAL_RNG_MODULE_ENABLED 314 #include "stm32g4xx_hal_rng.h" 315 #endif /* HAL_RNG_MODULE_ENABLED */ 316 317 #ifdef HAL_RTC_MODULE_ENABLED 318 #include "stm32g4xx_hal_rtc.h" 319 #endif /* HAL_RTC_MODULE_ENABLED */ 320 321 #ifdef HAL_SAI_MODULE_ENABLED 322 #include "stm32g4xx_hal_sai.h" 323 #endif /* HAL_SAI_MODULE_ENABLED */ 324 325 #ifdef HAL_SMARTCARD_MODULE_ENABLED 326 #include "stm32g4xx_hal_smartcard.h" 327 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 328 329 #ifdef HAL_SMBUS_MODULE_ENABLED 330 #include "stm32g4xx_hal_smbus.h" 331 #endif /* HAL_SMBUS_MODULE_ENABLED */ 332 333 #ifdef HAL_SPI_MODULE_ENABLED 334 #include "stm32g4xx_hal_spi.h" 335 #endif /* HAL_SPI_MODULE_ENABLED */ 336 337 #ifdef HAL_SRAM_MODULE_ENABLED 338 #include "stm32g4xx_hal_sram.h" 339 #endif /* HAL_SRAM_MODULE_ENABLED */ 340 341 #ifdef HAL_TIM_MODULE_ENABLED 342 #include "stm32g4xx_hal_tim.h" 343 #endif /* HAL_TIM_MODULE_ENABLED */ 344 345 #ifdef HAL_UART_MODULE_ENABLED 346 #include "stm32g4xx_hal_uart.h" 347 #endif /* HAL_UART_MODULE_ENABLED */ 348 349 #ifdef HAL_USART_MODULE_ENABLED 350 #include "stm32g4xx_hal_usart.h" 351 #endif /* HAL_USART_MODULE_ENABLED */ 352 353 #ifdef HAL_WWDG_MODULE_ENABLED 354 #include "stm32g4xx_hal_wwdg.h" 355 #endif /* HAL_WWDG_MODULE_ENABLED */ 356 357 /* Exported macro ------------------------------------------------------------*/ 358 #ifdef USE_FULL_ASSERT 359 /** 360 * @brief The assert_param macro is used for function's parameters check. 361 * @param expr: If expr is false, it calls assert_failed function 362 * which reports the name of the source file and the source 363 * line number of the call that failed. 364 * If expr is true, it returns no value. 365 * @retval None 366 */ 367 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 368 /* Exported functions ------------------------------------------------------- */ 369 void assert_failed(uint8_t *file, uint32_t line); 370 #else 371 #define assert_param(expr) ((void)0U) 372 #endif /* USE_FULL_ASSERT */ 373 374 #ifdef __cplusplus 375 } 376 #endif 377 378 #endif /* STM32G4xx_HAL_CONF_H */ 379 380 381
