1 /** 2 ****************************************************************************** 3 * @file stm32f2xx_hal_smartcard.h 4 * @author MCD Application Team 5 * @brief Header file of SMARTCARD HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef __STM32F2xx_HAL_SMARTCARD_H 21 #define __STM32F2xx_HAL_SMARTCARD_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f2xx_hal_def.h" 29 30 /** @addtogroup STM32F2xx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup SMARTCARD 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 /** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types 40 * @{ 41 */ 42 43 /** 44 * @brief SMARTCARD Init Structure definition 45 */ 46 typedef struct 47 { 48 uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. 49 The baud rate is computed using the following formula: 50 - IntegerDivider = ((PCLKx) / (16 * (hsc->Init.BaudRate))) 51 - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ 52 53 uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. 54 This parameter can be a value of @ref SMARTCARD_Word_Length */ 55 56 uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. 57 This parameter can be a value of @ref SMARTCARD_Stop_Bits */ 58 59 uint32_t Parity; /*!< Specifies the parity mode. 60 This parameter can be a value of @ref SMARTCARD_Parity 61 @note When parity is enabled, the computed parity is inserted 62 at the MSB position of the transmitted data (9th bit when 63 the word length is set to 9 data bits; 8th bit when the 64 word length is set to 8 data bits).*/ 65 66 uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. 67 This parameter can be a value of @ref SMARTCARD_Mode */ 68 69 uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. 70 This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ 71 72 uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. 73 This parameter can be a value of @ref SMARTCARD_Clock_Phase */ 74 75 uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted 76 data bit (MSB) has to be output on the SCLK pin in synchronous mode. 77 This parameter can be a value of @ref SMARTCARD_Last_Bit */ 78 79 uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock 80 to provide the smartcard clock. The value given in the register (5 significant bits) 81 is multiplied by 2 to give the division factor of the source clock frequency. 82 This parameter can be a value of @ref SMARTCARD_Prescaler */ 83 84 uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */ 85 86 uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. 87 This parameter can be a value of @ref SMARTCARD_NACK_State */ 88 }SMARTCARD_InitTypeDef; 89 90 /** 91 * @brief HAL SMARTCARD State structures definition 92 * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. 93 * - gState contains SMARTCARD state information related to global Handle management 94 * and also information related to Tx operations. 95 * gState value coding follow below described bitmap : 96 * b7-b6 Error information 97 * 00 : No Error 98 * 01 : (Not Used) 99 * 10 : Timeout 100 * 11 : Error 101 * b5 IP initialization status 102 * 0 : Reset (IP not initialized) 103 * 1 : Init done (IP initialized. HAL SMARTCARD Init function already called) 104 * b4-b3 (not used) 105 * xx : Should be set to 00 106 * b2 Intrinsic process state 107 * 0 : Ready 108 * 1 : Busy (IP busy with some configuration or internal operations) 109 * b1 (not used) 110 * x : Should be set to 0 111 * b0 Tx state 112 * 0 : Ready (no Tx operation ongoing) 113 * 1 : Busy (Tx operation ongoing) 114 * - RxState contains information related to Rx operations. 115 * RxState value coding follow below described bitmap : 116 * b7-b6 (not used) 117 * xx : Should be set to 00 118 * b5 IP initialization status 119 * 0 : Reset (IP not initialized) 120 * 1 : Init done (IP initialized) 121 * b4-b2 (not used) 122 * xxx : Should be set to 000 123 * b1 Rx state 124 * 0 : Ready (no Rx operation ongoing) 125 * 1 : Busy (Rx operation ongoing) 126 * b0 (not used) 127 * x : Should be set to 0. 128 */ 129 typedef enum 130 { 131 HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized 132 Value is allowed for gState and RxState */ 133 HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use 134 Value is allowed for gState and RxState */ 135 HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing 136 Value is allowed for gState only */ 137 HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing 138 Value is allowed for gState only */ 139 HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing 140 Value is allowed for RxState only */ 141 HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing 142 Not to be used for neither gState nor RxState. 143 Value is result of combination (Or) between gState and RxState values */ 144 HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state 145 Value is allowed for gState only */ 146 HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error 147 Value is allowed for gState only */ 148 }HAL_SMARTCARD_StateTypeDef; 149 150 /** 151 * @brief SMARTCARD handle Structure definition 152 */ 153 typedef struct __SMARTCARD_HandleTypeDef 154 { 155 USART_TypeDef *Instance; /*!< USART registers base address */ 156 157 SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ 158 159 const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ 160 161 uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ 162 163 __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ 164 165 uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ 166 167 uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ 168 169 __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ 170 171 DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ 172 173 DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ 174 175 HAL_LockTypeDef Lock; /*!< Locking object */ 176 177 __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management 178 and also related to Tx operations. 179 This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ 180 181 __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. 182 This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ 183 184 __IO uint32_t ErrorCode; /*!< SmartCard Error code */ 185 186 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) 187 void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Tx Complete Callback */ 188 189 void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Rx Complete Callback */ 190 191 void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Error Callback */ 192 193 void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Complete Callback */ 194 195 void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Transmit Complete Callback */ 196 197 void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Receive Complete Callback */ 198 199 void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp Init callback */ 200 201 void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp DeInit callback */ 202 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ 203 204 } SMARTCARD_HandleTypeDef; 205 206 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) 207 /** 208 * @brief HAL SMARTCARD Callback ID enumeration definition 209 */ 210 typedef enum 211 { 212 HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ 213 HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ 214 HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ 215 HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ 216 HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ 217 HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ 218 219 HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ 220 HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ 221 222 } HAL_SMARTCARD_CallbackIDTypeDef; 223 224 /** 225 * @brief HAL SMARTCARD Callback pointer definition 226 */ 227 typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< pointer to an SMARTCARD callback function */ 228 229 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ 230 231 /** 232 * @} 233 */ 234 235 /* Exported constants --------------------------------------------------------*/ 236 /** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants 237 * @{ 238 */ 239 240 /** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code 241 * @{ 242 */ 243 #define HAL_SMARTCARD_ERROR_NONE 0x00000000U /*!< No error */ 244 #define HAL_SMARTCARD_ERROR_PE 0x00000001U /*!< Parity error */ 245 #define HAL_SMARTCARD_ERROR_NE 0x00000002U /*!< Noise error */ 246 #define HAL_SMARTCARD_ERROR_FE 0x00000004U /*!< Frame error */ 247 #define HAL_SMARTCARD_ERROR_ORE 0x00000008U /*!< Overrun error */ 248 #define HAL_SMARTCARD_ERROR_DMA 0x00000010U /*!< DMA transfer error */ 249 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) 250 #define HAL_SMARTCARD_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ 251 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ 252 /** 253 * @} 254 */ 255 256 /** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length 257 * @{ 258 */ 259 #define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) 260 /** 261 * @} 262 */ 263 264 /** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits 265 * @{ 266 */ 267 #define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) 268 #define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) 269 /** 270 * @} 271 */ 272 273 /** @defgroup SMARTCARD_Parity SMARTCARD Parity 274 * @{ 275 */ 276 #define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) 277 #define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 278 /** 279 * @} 280 */ 281 282 /** @defgroup SMARTCARD_Mode SMARTCARD Mode 283 * @{ 284 */ 285 #define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) 286 #define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) 287 #define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) 288 /** 289 * @} 290 */ 291 292 /** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity 293 * @{ 294 */ 295 #define SMARTCARD_POLARITY_LOW 0x00000000U 296 #define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) 297 /** 298 * @} 299 */ 300 301 /** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase 302 * @{ 303 */ 304 #define SMARTCARD_PHASE_1EDGE 0x00000000U 305 #define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) 306 /** 307 * @} 308 */ 309 310 /** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit 311 * @{ 312 */ 313 #define SMARTCARD_LASTBIT_DISABLE 0x00000000U 314 #define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) 315 /** 316 * @} 317 */ 318 319 /** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State 320 * @{ 321 */ 322 #define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) 323 #define SMARTCARD_NACK_DISABLE 0x00000000U 324 /** 325 * @} 326 */ 327 328 /** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests 329 * @{ 330 */ 331 #define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) 332 #define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) 333 /** 334 * @} 335 */ 336 337 /** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler 338 * @{ 339 */ 340 #define SMARTCARD_PRESCALER_SYSCLK_DIV2 0x00000001U /*!< SYSCLK divided by 2 */ 341 #define SMARTCARD_PRESCALER_SYSCLK_DIV4 0x00000002U /*!< SYSCLK divided by 4 */ 342 #define SMARTCARD_PRESCALER_SYSCLK_DIV6 0x00000003U /*!< SYSCLK divided by 6 */ 343 #define SMARTCARD_PRESCALER_SYSCLK_DIV8 0x00000004U /*!< SYSCLK divided by 8 */ 344 #define SMARTCARD_PRESCALER_SYSCLK_DIV10 0x00000005U /*!< SYSCLK divided by 10 */ 345 #define SMARTCARD_PRESCALER_SYSCLK_DIV12 0x00000006U /*!< SYSCLK divided by 12 */ 346 #define SMARTCARD_PRESCALER_SYSCLK_DIV14 0x00000007U /*!< SYSCLK divided by 14 */ 347 #define SMARTCARD_PRESCALER_SYSCLK_DIV16 0x00000008U /*!< SYSCLK divided by 16 */ 348 #define SMARTCARD_PRESCALER_SYSCLK_DIV18 0x00000009U /*!< SYSCLK divided by 18 */ 349 #define SMARTCARD_PRESCALER_SYSCLK_DIV20 0x0000000AU /*!< SYSCLK divided by 20 */ 350 #define SMARTCARD_PRESCALER_SYSCLK_DIV22 0x0000000BU /*!< SYSCLK divided by 22 */ 351 #define SMARTCARD_PRESCALER_SYSCLK_DIV24 0x0000000CU /*!< SYSCLK divided by 24 */ 352 #define SMARTCARD_PRESCALER_SYSCLK_DIV26 0x0000000DU /*!< SYSCLK divided by 26 */ 353 #define SMARTCARD_PRESCALER_SYSCLK_DIV28 0x0000000EU /*!< SYSCLK divided by 28 */ 354 #define SMARTCARD_PRESCALER_SYSCLK_DIV30 0x0000000FU /*!< SYSCLK divided by 30 */ 355 #define SMARTCARD_PRESCALER_SYSCLK_DIV32 0x00000010U /*!< SYSCLK divided by 32 */ 356 #define SMARTCARD_PRESCALER_SYSCLK_DIV34 0x00000011U /*!< SYSCLK divided by 34 */ 357 #define SMARTCARD_PRESCALER_SYSCLK_DIV36 0x00000012U /*!< SYSCLK divided by 36 */ 358 #define SMARTCARD_PRESCALER_SYSCLK_DIV38 0x00000013U /*!< SYSCLK divided by 38 */ 359 #define SMARTCARD_PRESCALER_SYSCLK_DIV40 0x00000014U /*!< SYSCLK divided by 40 */ 360 #define SMARTCARD_PRESCALER_SYSCLK_DIV42 0x00000015U /*!< SYSCLK divided by 42 */ 361 #define SMARTCARD_PRESCALER_SYSCLK_DIV44 0x00000016U /*!< SYSCLK divided by 44 */ 362 #define SMARTCARD_PRESCALER_SYSCLK_DIV46 0x00000017U /*!< SYSCLK divided by 46 */ 363 #define SMARTCARD_PRESCALER_SYSCLK_DIV48 0x00000018U /*!< SYSCLK divided by 48 */ 364 #define SMARTCARD_PRESCALER_SYSCLK_DIV50 0x00000019U /*!< SYSCLK divided by 50 */ 365 #define SMARTCARD_PRESCALER_SYSCLK_DIV52 0x0000001AU /*!< SYSCLK divided by 52 */ 366 #define SMARTCARD_PRESCALER_SYSCLK_DIV54 0x0000001BU /*!< SYSCLK divided by 54 */ 367 #define SMARTCARD_PRESCALER_SYSCLK_DIV56 0x0000001CU /*!< SYSCLK divided by 56 */ 368 #define SMARTCARD_PRESCALER_SYSCLK_DIV58 0x0000001DU /*!< SYSCLK divided by 58 */ 369 #define SMARTCARD_PRESCALER_SYSCLK_DIV60 0x0000001EU /*!< SYSCLK divided by 60 */ 370 #define SMARTCARD_PRESCALER_SYSCLK_DIV62 0x0000001FU /*!< SYSCLK divided by 62 */ 371 /** 372 * @} 373 */ 374 375 /** @defgroup SmartCard_Flags SMARTCARD Flags 376 * Elements values convention: 0xXXXX 377 * - 0xXXXX : Flag mask in the SR register 378 * @{ 379 */ 380 #define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE) 381 #define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC) 382 #define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE) 383 #define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE) 384 #define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE) 385 #define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE) 386 #define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE) 387 #define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE) 388 /** 389 * @} 390 */ 391 392 /** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition 393 * Elements values convention: 0xY000XXXX 394 * - XXXX : Interrupt mask in the Y register 395 * - Y : Interrupt source register (2bits) 396 * - 01: CR1 register 397 * - 11: CR3 register 398 * @{ 399 */ 400 #define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) 401 #define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) 402 #define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) 403 #define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) 404 #define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) 405 #define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE)) 406 /** 407 * @} 408 */ 409 410 /** 411 * @} 412 */ 413 414 /* Exported macro ------------------------------------------------------------*/ 415 /** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros 416 * @{ 417 */ 418 419 /** @brief Reset SMARTCARD handle gstate & RxState 420 * @param __HANDLE__ specifies the SMARTCARD Handle. 421 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 422 * @retval None 423 */ 424 #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 425 #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ 426 (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ 427 (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ 428 (__HANDLE__)->MspInitCallback = NULL; \ 429 (__HANDLE__)->MspDeInitCallback = NULL; \ 430 } while(0U) 431 #else 432 #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ 433 (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ 434 (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ 435 } while(0U) 436 #endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ 437 438 /** @brief Flush the Smartcard DR register 439 * @param __HANDLE__ specifies the SMARTCARD Handle. 440 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 441 * @retval None 442 */ 443 #define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) 444 445 /** @brief Check whether the specified Smartcard flag is set or not. 446 * @param __HANDLE__ specifies the SMARTCARD Handle. 447 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 448 * @param __FLAG__ specifies the flag to check. 449 * This parameter can be one of the following values: 450 * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag 451 * @arg SMARTCARD_FLAG_TC: Transmission Complete flag 452 * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag 453 * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag 454 * @arg SMARTCARD_FLAG_ORE: Overrun Error flag 455 * @arg SMARTCARD_FLAG_NE: Noise Error flag 456 * @arg SMARTCARD_FLAG_FE: Framing Error flag 457 * @arg SMARTCARD_FLAG_PE: Parity Error flag 458 * @retval The new state of __FLAG__ (TRUE or FALSE). 459 */ 460 #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) 461 462 /** @brief Clear the specified Smartcard pending flags. 463 * @param __HANDLE__ specifies the SMARTCARD Handle. 464 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 465 * @param __FLAG__ specifies the flag to check. 466 * This parameter can be any combination of the following values: 467 * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. 468 * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. 469 * 470 * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun 471 * error) flags are cleared by software sequence: a read operation to 472 * USART_SR register followed by a read operation to USART_DR register. 473 * @note RXNE flag can be also cleared by a read to the USART_DR register. 474 * @note TC flag can be also cleared by software sequence: a read operation to 475 * USART_SR register followed by a write operation to USART_DR register. 476 * @note TXE flag is cleared only by a write to the USART_DR register. 477 * @retval None 478 */ 479 #define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) 480 481 /** @brief Clear the SMARTCARD PE pending flag. 482 * @param __HANDLE__ specifies the USART Handle. 483 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 484 * @retval None 485 */ 486 #define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ 487 do{ \ 488 __IO uint32_t tmpreg = 0x00U; \ 489 tmpreg = (__HANDLE__)->Instance->SR; \ 490 tmpreg = (__HANDLE__)->Instance->DR; \ 491 UNUSED(tmpreg); \ 492 } while(0U) 493 494 /** @brief Clear the SMARTCARD FE pending flag. 495 * @param __HANDLE__ specifies the USART Handle. 496 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 497 * @retval None 498 */ 499 #define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) 500 501 /** @brief Clear the SMARTCARD NE pending flag. 502 * @param __HANDLE__ specifies the USART Handle. 503 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 504 * @retval None 505 */ 506 #define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) 507 508 /** @brief Clear the SMARTCARD ORE pending flag. 509 * @param __HANDLE__ specifies the USART Handle. 510 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 511 * @retval None 512 */ 513 #define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) 514 515 /** @brief Clear the SMARTCARD IDLE pending flag. 516 * @param __HANDLE__ specifies the USART Handle. 517 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 518 * @retval None 519 */ 520 #define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) 521 522 /** @brief Enable the specified SmartCard interrupt. 523 * @param __HANDLE__ specifies the SMARTCARD Handle. 524 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 525 * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. 526 * This parameter can be one of the following values: 527 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt 528 * @arg SMARTCARD_IT_TC: Transmission complete interrupt 529 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt 530 * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt 531 * @arg SMARTCARD_IT_PE: Parity Error interrupt 532 * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) 533 * @retval None 534 */ 535 #define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ 536 ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) 537 538 /** @brief Disable the specified SmartCard interrupt. 539 * @param __HANDLE__ specifies the SMARTCARD Handle. 540 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 541 * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. 542 * This parameter can be one of the following values: 543 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt 544 * @arg SMARTCARD_IT_TC: Transmission complete interrupt 545 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt 546 * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt 547 * @arg SMARTCARD_IT_PE: Parity Error interrupt 548 * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) 549 * @retval None 550 */ 551 #define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ 552 ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) 553 554 /** @brief Checks whether the specified SmartCard interrupt has occurred or not. 555 * @param __HANDLE__ specifies the SmartCard Handle. 556 * @param __IT__ specifies the SMARTCARD interrupt source to check. 557 * This parameter can be one of the following values: 558 * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt 559 * @arg SMARTCARD_IT_TC: Transmission complete interrupt 560 * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt 561 * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt 562 * @arg SMARTCARD_IT_ERR: Error interrupt 563 * @arg SMARTCARD_IT_PE: Parity Error interrupt 564 * @retval The new state of __IT__ (TRUE or FALSE). 565 */ 566 #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) 567 568 /** @brief Macro to enable the SMARTCARD's one bit sample method 569 * @param __HANDLE__ specifies the SMARTCARD Handle. 570 * @retval None 571 */ 572 #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) 573 574 /** @brief Macro to disable the SMARTCARD's one bit sample method 575 * @param __HANDLE__ specifies the SMARTCARD Handle. 576 * @retval None 577 */ 578 #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) 579 580 /** @brief Enable the USART associated to the SMARTCARD Handle 581 * @param __HANDLE__ specifies the SMARTCARD Handle. 582 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 583 * @retval None 584 */ 585 #define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) 586 587 /** @brief Disable the USART associated to the SMARTCARD Handle 588 * @param __HANDLE__ specifies the SMARTCARD Handle. 589 * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). 590 * @retval None 591 */ 592 #define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) 593 594 /** @brief Macros to enable the SmartCard DMA request. 595 * @param __HANDLE__ specifies the SmartCard Handle. 596 * @param __REQUEST__ specifies the SmartCard DMA request. 597 * This parameter can be one of the following values: 598 * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request 599 * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request 600 * @retval None 601 */ 602 #define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) 603 604 /** @brief Macros to disable the SmartCard DMA request. 605 * @param __HANDLE__ specifies the SmartCard Handle. 606 * @param __REQUEST__ specifies the SmartCard DMA request. 607 * This parameter can be one of the following values: 608 * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request 609 * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request 610 * @retval None 611 */ 612 #define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) 613 614 /** 615 * @} 616 */ 617 618 /* Exported functions --------------------------------------------------------*/ 619 /** @addtogroup SMARTCARD_Exported_Functions 620 * @{ 621 */ 622 623 /** @addtogroup SMARTCARD_Exported_Functions_Group1 624 * @{ 625 */ 626 /* Initialization/de-initialization functions **********************************/ 627 HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); 628 HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc); 629 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); 630 void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); 631 void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); 632 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) 633 /* Callbacks Register/UnRegister functions ***********************************/ 634 HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback); 635 HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID); 636 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ 637 /** 638 * @} 639 */ 640 641 /** @addtogroup SMARTCARD_Exported_Functions_Group2 642 * @{ 643 */ 644 /* IO operation functions *******************************************************/ 645 HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size, uint32_t Timeout); 646 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); 647 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); 648 HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); 649 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); 650 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); 651 /* Transfer Abort functions */ 652 HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc); 653 HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsc); 654 HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsc); 655 HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsc); 656 HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsc); 657 HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsc); 658 659 void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); 660 void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); 661 void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); 662 void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); 663 void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsc); 664 void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsc); 665 void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsc); 666 /** 667 * @} 668 */ 669 670 /** @addtogroup SMARTCARD_Exported_Functions_Group3 671 * @{ 672 */ 673 /* Peripheral State functions **************************************************/ 674 HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsc); 675 uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsc); 676 /** 677 * @} 678 */ 679 680 /** 681 * @} 682 */ 683 /* Private types -------------------------------------------------------------*/ 684 /* Private variables ---------------------------------------------------------*/ 685 /* Private constants ---------------------------------------------------------*/ 686 /** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants 687 * @{ 688 */ 689 690 /** @brief SMARTCARD interruptions flag mask 691 * 692 */ 693 #define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ 694 USART_CR1_IDLEIE | USART_CR3_EIE ) 695 696 #define SMARTCARD_CR1_REG_INDEX 1U 697 #define SMARTCARD_CR3_REG_INDEX 3U 698 /** 699 * @} 700 */ 701 702 /* Private macros --------------------------------------------------------*/ 703 /** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros 704 * @{ 705 */ 706 #define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) 707 #define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ 708 ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) 709 #define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ 710 ((PARITY) == SMARTCARD_PARITY_ODD)) 711 #define IS_SMARTCARD_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x000000U)) 712 #define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) 713 #define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) 714 #define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ 715 ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) 716 #define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ 717 ((NACK) == SMARTCARD_NACK_DISABLE)) 718 #define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001U) 719 720 #define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__))) 721 #define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U) 722 #define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) ((((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U) + 50U) / 100U) 723 /* SMARTCARD BRR = mantissa + overflow + fraction 724 = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */ 725 #define SMARTCARD_BRR(__PCLK__, __BAUD__) (((SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) << 4U) + \ 726 (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0xF0U)) + \ 727 (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0FU)) 728 729 /** 730 * @} 731 */ 732 733 /* Private functions ---------------------------------------------------------*/ 734 /** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions 735 * @{ 736 */ 737 738 /** 739 * @} 740 */ 741 742 /** 743 * @} 744 */ 745 746 /** 747 * @} 748 */ 749 750 #ifdef __cplusplus 751 } 752 #endif 753 754 #endif /* __STM32F2xx_HAL_SMARTCARD_H */ 755 756
