1 /** 2 ****************************************************************************** 3 * @file stm32f1xx_hal_adc_ex.h 4 * @author MCD Application Team 5 * @brief Header file of ADC HAL extension module. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef __STM32F1xx_HAL_ADC_EX_H 22 #define __STM32F1xx_HAL_ADC_EX_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Includes ------------------------------------------------------------------*/ 29 #include "stm32f1xx_hal_def.h" 30 31 /** @addtogroup STM32F1xx_HAL_Driver 32 * @{ 33 */ 34 35 /** @addtogroup ADCEx 36 * @{ 37 */ 38 39 /* Exported types ------------------------------------------------------------*/ 40 /** @defgroup ADCEx_Exported_Types ADCEx Exported Types 41 * @{ 42 */ 43 44 /** 45 * @brief ADC Configuration injected Channel structure definition 46 * @note Parameters of this structure are shared within 2 scopes: 47 * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset 48 * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, 49 * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv. 50 * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. 51 * ADC state can be either: 52 * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv') 53 * - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group. 54 */ 55 typedef struct 56 { 57 uint32_t InjectedChannel; /*!< Selection of ADC channel to configure 58 This parameter can be a value of @ref ADC_channels 59 Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. 60 Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor) 61 Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger. 62 It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel. 63 Refer to errata sheet of these devices for more details. */ 64 uint32_t InjectedRank; /*!< Rank in the injected group sequencer 65 This parameter must be a value of @ref ADCEx_injected_rank 66 Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */ 67 uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. 68 Unit: ADC clock cycles 69 Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits). 70 This parameter can be a value of @ref ADC_sampling_times 71 Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups. 72 If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting. 73 Note: In case of usage of internal measurement channels (VrefInt/TempSensor), 74 sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) 75 Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */ 76 uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only). 77 Offset value must be a positive number. 78 Depending of ADC resolution selected (12, 10, 8 or 6 bits), 79 this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ 80 uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer. 81 To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. 82 This parameter must be a number between Min_Data = 1 and Max_Data = 4. 83 Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 84 configure a channel on injected group can impact the configuration of other channels previously set. */ 85 FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). 86 Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. 87 Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. 88 This parameter can be set to ENABLE or DISABLE. 89 Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one. 90 Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 91 configure a channel on injected group can impact the configuration of other channels previously set. */ 92 FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one 93 This parameter can be set to ENABLE or DISABLE. 94 Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) 95 Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START) 96 Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. 97 To maintain JAUTO always enabled, DMA must be configured in circular mode. 98 Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 99 configure a channel on injected group can impact the configuration of other channels previously set. */ 100 uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. 101 If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled. 102 If set to external trigger source, triggering is on event rising edge. 103 This parameter can be a value of @ref ADCEx_External_trigger_source_Injected 104 Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). 105 If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) 106 Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 107 configure a channel on injected group can impact the configuration of other channels previously set. */ 108 }ADC_InjectionConfTypeDef; 109 110 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 111 /** 112 * @brief Structure definition of ADC multimode 113 * @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group). 114 * State of ADCs of the common group must be: disabled. 115 */ 116 typedef struct 117 { 118 uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. 119 This parameter can be a value of @ref ADCEx_Common_mode 120 Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change. 121 Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2. 122 Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode. 123 Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters). 124 The equivalences are: 125 - Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'. 126 - Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */ 127 128 129 }ADC_MultiModeTypeDef; 130 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 131 132 /** 133 * @} 134 */ 135 136 137 /* Exported constants --------------------------------------------------------*/ 138 139 /** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants 140 * @{ 141 */ 142 143 /** @defgroup ADCEx_injected_rank ADCEx rank into injected group 144 * @{ 145 */ 146 #define ADC_INJECTED_RANK_1 0x00000001U 147 #define ADC_INJECTED_RANK_2 0x00000002U 148 #define ADC_INJECTED_RANK_3 0x00000003U 149 #define ADC_INJECTED_RANK_4 0x00000004U 150 /** 151 * @} 152 */ 153 154 /** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group 155 * @{ 156 */ 157 #define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE 0x00000000U 158 #define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG) 159 /** 160 * @} 161 */ 162 163 /** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group 164 * @{ 165 */ 166 /*!< List of external triggers with generic trigger name, independently of */ 167 /* ADC target, sorted by trigger name: */ 168 169 /*!< External triggers of regular group for ADC1&ADC2 only */ 170 #define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1 171 #define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2 172 #define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2 173 #define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO 174 #define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4 175 #define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11 176 177 #if defined (STM32F103xE) || defined (STM32F103xG) 178 /*!< External triggers of regular group for ADC3 only */ 179 #define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_EXTERNALTRIG_T2_CC3 180 #define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_EXTERNALTRIG_T3_CC1 181 #define ADC_EXTERNALTRIGCONV_T5_CC1 ADC3_EXTERNALTRIG_T5_CC1 182 #define ADC_EXTERNALTRIGCONV_T5_CC3 ADC3_EXTERNALTRIG_T5_CC3 183 #define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_EXTERNALTRIG_T8_CC1 184 #endif /* STM32F103xE || defined STM32F103xG */ 185 186 /*!< External triggers of regular group for all ADC instances */ 187 #define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_3_EXTERNALTRIG_T1_CC3 188 189 #if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) 190 /*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */ 191 /* XL-density devices. */ 192 /* To use it on ADC or ADC2, a remap of trigger must be done from */ 193 /* EXTI line 11 to TIM8_TRGO with macro: */ 194 /* __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() */ 195 /* __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() */ 196 197 /* Note for internal constant value management: If TIM8_TRGO is available, */ 198 /* its definition is set to value for ADC1&ADC2 by default and changed to */ 199 /* value for ADC3 by HAL ADC driver if ADC3 is selected. */ 200 #define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO 201 #endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ 202 203 #define ADC_SOFTWARE_START ADC1_2_3_SWSTART 204 /** 205 * @} 206 */ 207 208 /** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group 209 * @{ 210 */ 211 /*!< List of external triggers with generic trigger name, independently of */ 212 /* ADC target, sorted by trigger name: */ 213 214 /*!< External triggers of injected group for ADC1&ADC2 only */ 215 #define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO 216 #define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1 217 #define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4 218 #define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO 219 #define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 220 221 #if defined (STM32F103xE) || defined (STM32F103xG) 222 /*!< External triggers of injected group for ADC3 only */ 223 #define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_EXTERNALTRIGINJEC_T4_CC3 224 #define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_EXTERNALTRIGINJEC_T8_CC2 225 #define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ADC3_EXTERNALTRIGINJEC_T5_TRGO 226 #define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ADC3_EXTERNALTRIGINJEC_T5_CC4 227 #endif /* STM32F103xE || defined STM32F103xG */ 228 229 /*!< External triggers of injected group for all ADC instances */ 230 #define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 231 #define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO 232 233 #if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) 234 /*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */ 235 /* XL-density devices. */ 236 /* To use it on ADC1 or ADC2, a remap of trigger must be done from */ 237 /* EXTI line 11 to TIM8_CC4 with macro: */ 238 /* __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() */ 239 /* __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() */ 240 241 /* Note for internal constant value management: If TIM8_CC4 is available, */ 242 /* its definition is set to value for ADC1&ADC2 by default and changed to */ 243 /* value for ADC3 by HAL ADC driver if ADC3 is selected. */ 244 #define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4 245 #endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ 246 247 #define ADC_INJECTED_SOFTWARE_START ADC1_2_3_JSWSTART 248 /** 249 * @} 250 */ 251 252 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 253 /** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode 254 * @{ 255 */ 256 #define ADC_MODE_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */ 257 #define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */ 258 #define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)( ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */ 259 #define ADC_DUALMODE_INJECSIMULT_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ 260 #define ADC_DUALMODE_INJECSIMULT_INTERLSLOW ((uint32_t)( ADC_CR1_DUALMOD_2 )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ 261 #define ADC_DUALMODE_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */ 262 #define ADC_DUALMODE_REGSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */ 263 #define ADC_DUALMODE_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ 264 #define ADC_DUALMODE_INTERLSLOW ((uint32_t)(ADC_CR1_DUALMOD_3 )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */ 265 #define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CR1_DUALMOD_3 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */ 266 /** 267 * @} 268 */ 269 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 270 271 /** 272 * @} 273 */ 274 275 276 /* Private constants ---------------------------------------------------------*/ 277 278 /** @addtogroup ADCEx_Private_Constants ADCEx Private Constants 279 * @{ 280 */ 281 282 /** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group 283 * @{ 284 */ 285 /* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC */ 286 /* instance is available on the selected device). */ 287 /* (used internally by HAL driver. To not use into HAL structure parameters) */ 288 289 /* External triggers of regular group for ADC1&ADC2 (if ADCx available) */ 290 #define ADC1_2_EXTERNALTRIG_T1_CC1 0x00000000U 291 #define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)( ADC_CR2_EXTSEL_0)) 292 #define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)( ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) 293 #define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 )) 294 #define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) 295 #define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 )) 296 #if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) 297 /* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */ 298 /* XL-density devices. */ 299 #define ADC1_2_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_EXT_IT11 300 #endif 301 302 #if defined (STM32F103xE) || defined (STM32F103xG) 303 /* External triggers of regular group for ADC3 */ 304 #define ADC3_EXTERNALTRIG_T3_CC1 ADC1_2_EXTERNALTRIG_T1_CC1 305 #define ADC3_EXTERNALTRIG_T2_CC3 ADC1_2_EXTERNALTRIG_T1_CC2 306 #define ADC3_EXTERNALTRIG_T8_CC1 ADC1_2_EXTERNALTRIG_T2_CC2 307 #define ADC3_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO 308 #define ADC3_EXTERNALTRIG_T5_CC1 ADC1_2_EXTERNALTRIG_T4_CC4 309 #define ADC3_EXTERNALTRIG_T5_CC3 ADC1_2_EXTERNALTRIG_EXT_IT11 310 #endif 311 312 /* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */ 313 #define ADC1_2_3_EXTERNALTRIG_T1_CC3 ((uint32_t)( ADC_CR2_EXTSEL_1 )) 314 #define ADC1_2_3_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) 315 /** 316 * @} 317 */ 318 319 /** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group 320 * @{ 321 */ 322 /* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC */ 323 /* instance is available on the selected device). */ 324 /* (used internally by HAL driver. To not use into HAL structure parameters) */ 325 326 /* External triggers of injected group for ADC1&ADC2 (if ADCx available) */ 327 #define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 )) 328 #define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) 329 #define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 )) 330 #define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) 331 #define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 )) 332 #if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) 333 /* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */ 334 /* XL-density devices. */ 335 #define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 336 #endif 337 338 #if defined (STM32F103xE) || defined (STM32F103xG) 339 /* External triggers of injected group for ADC3 */ 340 #define ADC3_EXTERNALTRIGINJEC_T4_CC3 ADC1_2_EXTERNALTRIGINJEC_T2_TRGO 341 #define ADC3_EXTERNALTRIGINJEC_T8_CC2 ADC1_2_EXTERNALTRIGINJEC_T2_CC1 342 #define ADC3_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4 343 #define ADC3_EXTERNALTRIGINJEC_T5_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO 344 #define ADC3_EXTERNALTRIGINJEC_T5_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 345 #endif /* STM32F103xE || defined STM32F103xG */ 346 347 /* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */ 348 #define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO 0x00000000U 349 #define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_0)) 350 #define ADC1_2_3_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) 351 /** 352 * @} 353 */ 354 355 /** 356 * @} 357 */ 358 359 360 /* Exported macro ------------------------------------------------------------*/ 361 362 /* Private macro -------------------------------------------------------------*/ 363 364 /** @defgroup ADCEx_Private_Macro ADCEx Private Macro 365 * @{ 366 */ 367 /* Macro reserved for internal HAL driver usage, not intended to be used in */ 368 /* code of final user. */ 369 370 371 /** 372 * @brief For devices with 3 ADCs: Defines the external trigger source 373 * for regular group according to ADC into common group ADC1&ADC2 or 374 * ADC3 (some triggers with same source have different value to 375 * be programmed into ADC EXTSEL bits of CR2 register). 376 * For devices with 2 ADCs or less: this macro makes no change. 377 * @param __HANDLE__: ADC handle 378 * @param __EXT_TRIG_CONV__: External trigger selected for regular group. 379 * @retval External trigger to be programmed into EXTSEL bits of CR2 register 380 */ 381 #if defined (STM32F103xE) || defined (STM32F103xG) 382 #define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \ 383 (( (((__HANDLE__)->Instance) == ADC3) \ 384 )? \ 385 ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \ 386 )? \ 387 (ADC3_EXTERNALTRIG_T8_TRGO) \ 388 : \ 389 (__EXT_TRIG_CONV__) \ 390 ) \ 391 : \ 392 (__EXT_TRIG_CONV__) \ 393 ) 394 #else 395 #define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \ 396 (__EXT_TRIG_CONV__) 397 #endif /* STM32F103xE || STM32F103xG */ 398 399 /** 400 * @brief For devices with 3 ADCs: Defines the external trigger source 401 * for injected group according to ADC into common group ADC1&ADC2 or 402 * ADC3 (some triggers with same source have different value to 403 * be programmed into ADC JEXTSEL bits of CR2 register). 404 * For devices with 2 ADCs or less: this macro makes no change. 405 * @param __HANDLE__: ADC handle 406 * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group. 407 * @retval External trigger to be programmed into JEXTSEL bits of CR2 register 408 */ 409 #if defined (STM32F103xE) || defined (STM32F103xG) 410 #define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \ 411 (( (((__HANDLE__)->Instance) == ADC3) \ 412 )? \ 413 ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \ 414 )? \ 415 (ADC3_EXTERNALTRIGINJEC_T8_CC4) \ 416 : \ 417 (__EXT_TRIG_INJECTCONV__) \ 418 ) \ 419 : \ 420 (__EXT_TRIG_INJECTCONV__) \ 421 ) 422 #else 423 #define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \ 424 (__EXT_TRIG_INJECTCONV__) 425 #endif /* STM32F103xE || STM32F103xG */ 426 427 428 /** 429 * @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs) 430 * @param __HANDLE__: ADC handle 431 * @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled 432 */ 433 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 434 #define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \ 435 (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \ 436 )? \ 437 (ADC1->CR1 & ADC_CR1_DUALMOD) \ 438 : \ 439 (RESET) \ 440 ) 441 #else 442 #define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \ 443 (RESET) 444 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 445 446 /** 447 * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs) 448 * @param __HANDLE__: ADC handle 449 * @retval None 450 */ 451 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 452 #define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \ 453 (( (((__HANDLE__)->Instance) == ADC2) \ 454 )? \ 455 ((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET) \ 456 : \ 457 (!RESET) \ 458 ) 459 #else 460 #define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \ 461 (!RESET) 462 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 463 464 /** 465 * @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs) 466 * @param __HANDLE__: ADC handle 467 * @retval None 468 */ 469 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 470 #define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \ 471 (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \ 472 )? \ 473 (ADC1->CR1 & ADC_CR1_JAUTO) \ 474 : \ 475 (RESET) \ 476 ) 477 #else 478 #define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \ 479 (RESET) 480 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 481 482 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 483 /** 484 * @brief Set handle of the other ADC sharing the common multimode settings 485 * @param __HANDLE__: ADC handle 486 * @param __HANDLE_OTHER_ADC__: other ADC handle 487 * @retval None 488 */ 489 #define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \ 490 ((__HANDLE_OTHER_ADC__)->Instance = ADC2) 491 492 /** 493 * @brief Set handle of the ADC slave associated to the ADC master 494 * On STM32F1 devices, ADC slave is always ADC2 (this can be different 495 * on other STM32 devices) 496 * @param __HANDLE_MASTER__: ADC master handle 497 * @param __HANDLE_SLAVE__: ADC slave handle 498 * @retval None 499 */ 500 #define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \ 501 ((__HANDLE_SLAVE__)->Instance = ADC2) 502 503 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 504 505 #define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \ 506 ((CHANNEL) == ADC_INJECTED_RANK_2) || \ 507 ((CHANNEL) == ADC_INJECTED_RANK_3) || \ 508 ((CHANNEL) == ADC_INJECTED_RANK_4)) 509 510 #define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ 511 ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING)) 512 513 /** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification 514 * @{ 515 */ 516 #define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U)) 517 /** 518 * @} 519 */ 520 521 #if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) 522 #define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ 523 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ 524 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ 525 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ 526 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ 527 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ 528 ((REGTRIG) == ADC_SOFTWARE_START)) 529 #endif 530 #if defined (STM32F101xE) 531 #define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ 532 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ 533 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ 534 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ 535 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ 536 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ 537 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ 538 ((REGTRIG) == ADC_SOFTWARE_START)) 539 #endif 540 #if defined (STM32F101xG) 541 #define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ 542 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ 543 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ 544 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ 545 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ 546 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ 547 ((REGTRIG) == ADC_SOFTWARE_START)) 548 #endif 549 #if defined (STM32F103xE) || defined (STM32F103xG) 550 #define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ 551 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ 552 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ 553 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ 554 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ 555 ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \ 556 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ 557 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ 558 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \ 559 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \ 560 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \ 561 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \ 562 ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ 563 ((REGTRIG) == ADC_SOFTWARE_START)) 564 #endif 565 566 #if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) 567 #define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ 568 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ 569 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ 570 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ 571 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ 572 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ 573 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ 574 ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) 575 #endif 576 #if defined (STM32F101xE) 577 #define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ 578 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ 579 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ 580 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ 581 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ 582 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ 583 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ 584 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ 585 ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) 586 #endif 587 #if defined (STM32F101xG) 588 #define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ 589 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ 590 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ 591 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ 592 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ 593 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ 594 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ 595 ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) 596 #endif 597 #if defined (STM32F103xE) || defined (STM32F103xG) 598 #define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ 599 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ 600 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ 601 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ 602 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ 603 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \ 604 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \ 605 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \ 606 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \ 607 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ 608 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ 609 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ 610 ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ 611 ((REGTRIG) == ADC_INJECTED_SOFTWARE_START)) 612 #endif 613 614 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 615 #define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \ 616 ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ 617 ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ 618 ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \ 619 ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \ 620 ((MODE) == ADC_DUALMODE_INJECSIMULT) || \ 621 ((MODE) == ADC_DUALMODE_REGSIMULT) || \ 622 ((MODE) == ADC_DUALMODE_INTERLFAST) || \ 623 ((MODE) == ADC_DUALMODE_INTERLSLOW) || \ 624 ((MODE) == ADC_DUALMODE_ALTERTRIG) ) 625 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 626 627 /** 628 * @} 629 */ 630 631 632 633 634 635 636 /* Exported functions --------------------------------------------------------*/ 637 /** @addtogroup ADCEx_Exported_Functions 638 * @{ 639 */ 640 641 /* IO operation functions *****************************************************/ 642 /** @addtogroup ADCEx_Exported_Functions_Group1 643 * @{ 644 */ 645 646 /* ADC calibration */ 647 HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc); 648 649 /* Blocking mode: Polling */ 650 HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); 651 HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); 652 HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); 653 654 /* Non-blocking mode: Interruption */ 655 HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); 656 HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); 657 658 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 659 /* ADC multimode */ 660 HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); 661 HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); 662 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 663 664 /* ADC retrieve conversion value intended to be used with polling or interruption */ 665 uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); 666 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 667 uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc); 668 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 669 670 /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ 671 void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); 672 /** 673 * @} 674 */ 675 676 677 /* Peripheral Control functions ***********************************************/ 678 /** @addtogroup ADCEx_Exported_Functions_Group2 679 * @{ 680 */ 681 HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); 682 #if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG) 683 HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode); 684 #endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */ 685 /** 686 * @} 687 */ 688 689 690 /** 691 * @} 692 */ 693 694 695 /** 696 * @} 697 */ 698 699 /** 700 * @} 701 */ 702 703 #ifdef __cplusplus 704 } 705 #endif 706 707 #endif /* __STM32F1xx_HAL_ADC_EX_H */ 708 709 710 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 711
