1 /** 2 ****************************************************************************** 3 * @file stm32f0xx.h 4 * @author MCD Application Team 5 * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File. 6 * 7 * The file is the unique include file that the application programmer 8 * is using in the C source code, usually in main.c. This file contains: 9 * - Configuration section that allows to select: 10 * - The STM32F0xx device used in the target application 11 * - To use or not the peripheral's drivers in application code(i.e. 12 * code will be based on direct access to peripheral's registers 13 * rather than drivers API), this option is controlled by 14 * "#define USE_HAL_DRIVER" 15 * 16 ****************************************************************************** 17 * @attention 18 * 19 * Copyright (c) 2016 STMicroelectronics. 20 * All rights reserved. 21 * 22 * This software is licensed under terms that can be found in the LICENSE file 23 * in the root directory of this software component. 24 * If no LICENSE file comes with this software, it is provided AS-IS. 25 * 26 ****************************************************************************** 27 */ 28 /** @addtogroup CMSIS 29 * @{ 30 */ 31 32 /** @addtogroup stm32f0xx 33 * @{ 34 */ 35 36 #ifndef __STM32F0xx_H 37 #define __STM32F0xx_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif /* __cplusplus */ 42 43 /** @addtogroup Library_configuration_section 44 * @{ 45 */ 46 47 /** 48 * @brief STM32 Family 49 */ 50 #if !defined (STM32F0) 51 #define STM32F0 52 #endif /* STM32F0 */ 53 54 /** Uncomment the line below according to the target STM32 device used in your application. 55 * stm32f0xxxx.h file contains: 56 * - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices 57 * - IRQ channel definition 58 * - Peripheral memory mapping and physical registers address definition 59 * - Peripheral pointer declaration and driver header file inclusion 60 * - Product miscellaneous configuration: assert macros, � 61 * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family's superset. 62 */ 63 64 #if !defined (STM32F030x6) && !defined (STM32F030x8) && \ 65 !defined (STM32F031x6) && !defined (STM32F038xx) && \ 66 !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \ 67 !defined (STM32F051x8) && !defined (STM32F058xx) && \ 68 !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \ 69 !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC) 70 /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ 71 /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */ 72 /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ 73 /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */ 74 /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ 75 /* #define STM32F048xx */ /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes) */ 76 /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */ 77 /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */ 78 /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ 79 /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ 80 /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ 81 /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ 82 /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */ 83 /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */ 84 /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */ 85 /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */ 86 #endif 87 /* Legacy aliases */ 88 #if defined (STM32F048x6) 89 #define STM32F048xx 90 #endif /* STM32F048x6 */ 91 92 /* Tip: To avoid modifying this file each time you need to switch between these 93 devices, you can define the device in your toolchain compiler preprocessor. 94 */ 95 #if !defined (USE_HAL_DRIVER) 96 /** 97 * @brief Comment the line below if you will not use the peripherals drivers. 98 In this case, these drivers will not be included and the application code will 99 be based on direct access to peripherals registers 100 */ 101 /*#define USE_HAL_DRIVER */ 102 #endif /* USE_HAL_DRIVER */ 103 104 /** 105 * @brief CMSIS Device version number V2.3.7 106 */ 107 #define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ 108 #define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ 109 #define __STM32F0_DEVICE_VERSION_SUB2 (0x07) /*!< [15:8] sub2 version */ 110 #define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ 111 #define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\ 112 |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\ 113 |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\ 114 |(__STM32F0_DEVICE_VERSION_RC)) 115 116 /** 117 * @} 118 */ 119 120 /** @addtogroup Device_Included 121 * @{ 122 */ 123 124 #if defined(STM32F030x6) 125 #include "stm32f030x6.h" 126 #elif defined(STM32F030x8) 127 #include "stm32f030x8.h" 128 #elif defined(STM32F031x6) 129 #include "stm32f031x6.h" 130 #elif defined(STM32F038xx) 131 #include "stm32f038xx.h" 132 #elif defined(STM32F042x6) 133 #include "stm32f042x6.h" 134 #elif defined(STM32F048xx) 135 #include "stm32f048xx.h" 136 #elif defined(STM32F051x8) 137 #include "stm32f051x8.h" 138 #elif defined(STM32F058xx) 139 #include "stm32f058xx.h" 140 #elif defined(STM32F070x6) 141 #include "stm32f070x6.h" 142 #elif defined(STM32F070xB) 143 #include "stm32f070xb.h" 144 #elif defined(STM32F071xB) 145 #include "stm32f071xb.h" 146 #elif defined(STM32F072xB) 147 #include "stm32f072xb.h" 148 #elif defined(STM32F078xx) 149 #include "stm32f078xx.h" 150 #elif defined(STM32F091xC) 151 #include "stm32f091xc.h" 152 #elif defined(STM32F098xx) 153 #include "stm32f098xx.h" 154 #elif defined(STM32F030xC) 155 #include "stm32f030xc.h" 156 #else 157 #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" 158 #endif 159 160 /** 161 * @} 162 */ 163 164 /** @addtogroup Exported_types 165 * @{ 166 */ 167 typedef enum 168 { 169 RESET = 0U, 170 SET = !RESET 171 } FlagStatus, ITStatus; 172 173 typedef enum 174 { 175 DISABLE = 0U, 176 ENABLE = !DISABLE 177 } FunctionalState; 178 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) 179 180 typedef enum 181 { 182 SUCCESS = 0U, 183 ERROR = !SUCCESS 184 } ErrorStatus; 185 186 /** 187 * @} 188 */ 189 190 191 /** @addtogroup Exported_macros 192 * @{ 193 */ 194 #define SET_BIT(REG, BIT) ((REG) |= (BIT)) 195 196 #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) 197 198 #define READ_BIT(REG, BIT) ((REG) & (BIT)) 199 200 #define CLEAR_REG(REG) ((REG) = (0x0)) 201 202 #define WRITE_REG(REG, VAL) ((REG) = (VAL)) 203 204 #define READ_REG(REG) ((REG)) 205 206 #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) 207 208 /* Use of interrupt control for register exclusive access */ 209 /* Atomic 32-bit register access macro to set one or several bits */ 210 #define ATOMIC_SET_BIT(REG, BIT) \ 211 do { \ 212 uint32_t primask; \ 213 primask = __get_PRIMASK(); \ 214 __set_PRIMASK(1); \ 215 SET_BIT((REG), (BIT)); \ 216 __set_PRIMASK(primask); \ 217 } while(0) 218 219 /* Atomic 32-bit register access macro to clear one or several bits */ 220 #define ATOMIC_CLEAR_BIT(REG, BIT) \ 221 do { \ 222 uint32_t primask; \ 223 primask = __get_PRIMASK(); \ 224 __set_PRIMASK(1); \ 225 CLEAR_BIT((REG), (BIT)); \ 226 __set_PRIMASK(primask); \ 227 } while(0) 228 229 /* Atomic 32-bit register access macro to clear and set one or several bits */ 230 #define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ 231 do { \ 232 uint32_t primask; \ 233 primask = __get_PRIMASK(); \ 234 __set_PRIMASK(1); \ 235 MODIFY_REG((REG), (CLEARMSK), (SETMASK)); \ 236 __set_PRIMASK(primask); \ 237 } while(0) 238 239 /* Atomic 16-bit register access macro to set one or several bits */ 240 #define ATOMIC_SETH_BIT(REG, BIT) ATOMIC_SET_BIT(REG, BIT) \ 241 242 /* Atomic 16-bit register access macro to clear one or several bits */ 243 #define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT) \ 244 245 /* Atomic 16-bit register access macro to clear and set one or several bits */ 246 #define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ 247 248 /** 249 * @} 250 */ 251 252 #if defined (USE_HAL_DRIVER) 253 #include "stm32f0xx_hal.h" 254 #endif /* USE_HAL_DRIVER */ 255 256 257 #ifdef __cplusplus 258 } 259 #endif /* __cplusplus */ 260 261 #endif /* __STM32F0xx_H */ 262 /** 263 * @} 264 */ 265 266 /** 267 * @} 268 */ 269 270
